Tender For Repair/Maint Of Compound Wall, Retaining Wals, Boundary Wall, Gates, Concertina Coils, Barbed Wire Fencing, Firing Range, Plain Cement Concrete Coping And Other Misc Works In Internal Units Of Technical Area At Afs Sulur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Aug 2026
1 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Compound Wall, Retaining Wals, Boundary Wall, Gates, Concertina Coils, Barbed Wire Fencing, Firing Range, Plain Cement Concrete Coping And Other Misc Works In Internal Units Of Technical Area At Afs Sulur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) SULUR NAME OF WORK : REPAIR/MAINT OF COMPOUND WALL, RETAINING WALS, BOUNDARY WALL, GATES, CONCERTINA COILS, BARBED WIRE FENCING, FIRING RANGE, PCC COPING AND OTHER MISC WORKS IN INTERNAL UNITS OF TECHNICAL AREA AT AFS SULUR CA NO: GE(AF)/SUL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 3 | Supply only Chain link mesh, made of galvanised wire and shall confirm to IS 2712-2003 and having medium zinc coating 135-150 (GSM), heavy type including binding wire etc fixed to any type of standards posts complete all as specified and as directed.Note:The mesh shall consist embossing of original manufacturer logo at every 1 to 3m length. |
| 4 | Straining and fixing only chain link fencing including line wires, any mesh size and type of to any type of standards, rails, straining bolts etc including provisionof 10mm dia MS bars as line wire welded to fencing posts and MS flat iron for fixing fencing wire mesh complete all as specified and as directed.Note: Supply only chain link mesh and 10mm dia round bars shall be measured and paid vide Item no 2.00 and 9.00 respectively. Labour for fixing shall be deemed to be included in quoted rate. |
| 5 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground posts embeded in concrete, brick work, masonry etc complete all as specified and as directed. |
| 6 | S&F for Angle iron/flat iron for fixing chain link or hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc . wind ties for roof including securing bolts, posts and struts in fencing including cutting tops shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or reveting etc, and similar work conforming to Fe-290 or Fe-165 complete all as specified and directed. |
| 7 | S&F Mild screw bolts 11 to 15 mm diameter of neck shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to fitted with washers and one hexagonal or square exc. 5cm but not exc 10cm long complete all as specified and as directed. |
| 8 | Excavating in post holes (similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming each or boken rubble mixed with earth around in layers not exceeding 25 cm, in hard/dense soil complete all as specified and directed. |
| 9 | M&L for Preparation on new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed. |
| 10 | Supply only 10mm dia MS (Fe-290, Gde-165) round bars, cut to length, hooking ends as in wooven/ straining bar (stiches through chain link fencing between post) complete all as specified and as directed. |
| 11 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., including removing debris material to out ide MoD land complete all as specified and directed. |
| 12 | M&L for Precast cement concrete block masonry with solid blocks, exc. 10 cm in width type B-1 1:2:4 using 20mm graded stone aggregate and setting in mortar 1:4 complete all as specified and as directed |
| 13 | M&L for 10 mm thick cement plaster as in cement mortar 1:6 on brick or Concrete surface including dubbing coat if required & finishing with surface even and fair complete all as specified and directed .Note:No extra payement shall be paid for dubbing coat. |
| 14 | Taking down cement plaster on brick or stone walls etc., including ceilings including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed . |
| 15 | M&L for Rendering 15mm thick as fair faces of bricks in cement mortar 1:4 finished even and smooth without using extra cement using WPC @ 3% of cement complete all as specified and directed.Note : WPC shall be be measured and paid separately. |
| 16 | Supply only integral water proofing compound complete all as specified and directed. |
| 17 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 18 | M&L for Rendering 10 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified & directed. |
| 19 | M&L for prepration of new plastered surface of wall and applying two coats of oil emulsion distemper incl over a coat of primer complete all as specified & directed. |
| 20 | S&F in repairs Galvanised medium zinc coated 135-150 (GSM) as per IS 278-2003, 2 strand, steel barbed wire 2.24mm dia barbed at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed.Notes:(i) Each line of wire shall be measured.(ii) The mesh shall consist embossing of original manufacturer logo at every 1 to 3m length. (iii) Manufacturer test report for material shall be submitted by contractor. |
| 21 | Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for including cutting of reinforcement to facilitate the demolition and removing the rubbish off the premises complete all as specified and as directed. |
| 22 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 23 | M&L for Providing precast cement concrete set in cement mortar 1:6, Type B1 1:2:4 (20mm graded aggregate) incl formwork in landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs,mangers, shelves and similar articles with plain face complete all as specified and directed. |
| 24 | Demolition of cement concrete (unreinforced) in any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 25 | M&L for hard core ,broken stone or boulders of gauge n.exc. 63mm, deposited, spread and leveled in layers not exc 15cm thick,watered and rammed to a true surface complete all as specified and directed. |
| 26 | M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement with and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over sand cushion complete all as specified and as directed. |
| 27 | M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement with and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade laid over sand cushion complete all as specified and as directed. |
| 28 | M&L for M sand cushioning including spreading in layers and rolled consolidated to thickness of 50mm (minimum) for receiving precast PCC interlocking blocks complete all as specified and directed. |
| 29 | Supply & Laying for River sand (M sand prohibited) filling in firing butt of height average 3.2 m including necesaary watering complete all as specified and directed. |
| 30 | Supply only saw dust and mixing with sand in proportion as directed including filling in the firing butt complete all as specified and directed. |
| 31 | M&L for river sand duly filled in Polyethene bag of 50 Kg capacity and river sand filling (M sand prohibited) in bag after screening, stIching the bag with hand machine and stacked/placed upto 1.5m height complete all as specified and directed. |
| 32 | Removing the existing sand from the firing butt and refilling in the same area after sieveing the sand with out any fired bullet scrap, pebbles etc, complete all as specified and directed. |
| 33 | S&F in repairs Galvanised steel, super razed punched barb tape (SRPBT) aluminium base helix concertina coil 1050mm dia (dia of coil with unstreched), heavy grade, with and including necessary GI fixing clips for securing complete all as specified and directed with following specifications:(i) No of circles - 50 turns per coil.(ii)Weight of each coil with hessian pack-15 Kg (±0.5).(iii) 5 spirals per Rm(v) Central core wire-made from 2.5mm dia GI-H.T.S.S wire per IS 4454 galvanised as per IS 2629.(vi) Barb tap length- 23.50mm(vii) Barb Width- 18.60mm(vii) Barb Spacing- 36.00mm(viii) Centre width- 7.40mm(ix) Barb length- 20-22mmNotes: (i) Running length of the wall shall be measured for payment purpose.(ii) Each bundle shall not be stretched beyond 6m.(iii) Manufacturer test report for material shall be submitted by contractor. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender