Tender For Repair/Maintenance Of Transformers, Ht Protection & Control System, Ht Distribution Network And Connected Items At Mffr Under Age (I) Mffr
Tender Value
30 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
2 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Transformers, Ht Protection & Control System, Ht Distribution Network And Connected Items At Mffr Under Age (I) Mffr
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | All as per serial item No. 1.00 here-in-before but depth exc 1.5m and not exc 3m. |
| 3 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed. |
| 4 | Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed. |
| 5 | Supply,laying of double wall corrigated pipe of outer dia 160 mm and inner dia 135 mm for cable protection as per IS-16205 complete all as specified and as directed. |
| 6 | M&L for PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as PCC bed in foundations of poles, filling, mass concrete and similar works, complete all as specified and as directed.Note : Volume of pole/strut embedded in concrete shall be deducted for the purpose of payment complete all as specified and as directed. |
| 7 | M&L for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundations of poles/stay assembly, filling, mass concrete and similar works, complete all as specified and as directed. |
| 8 | M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate in cement mortar 1:4 as in copings, pedestal of poles and the like including use and waste of form work (straight or curved), all exposed surface of concrete finished even & smooth without using extra cement, complete all as specified & as directed.Note : Volume of pole/strut embedded in concrete shall be deducted for the purpose of payment. |
| 9 | S&F Steel tubular swaged poles 11mtr long complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-55 including top surface of pole with 2 coats of aluminium anti corrosive paint of first quality and painting to pole upto 1.5 mtr height from top of PCC coping with synthetic enamel paint 2 coats in black and white alternative strip including numbering in 8 cm height of number with white paint, both paints (aluminium/synthetic as approved) including numbering of poles complete all as specified and as directed. |
| 10 | S&F pre-stressed concrete pole 11 metre long of cross section 152mm x 152mm at the top and 152mm x 260mm at bottom, class 9, complying with requirements of IS-1678-1998 with & including two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.5 metre height from PCC coping/pedestal and marking pole number in letters & figures of size not less than 8cm height, including taking out old unserviceable pole complete all as specified and as directed. Note :- Excavation, earthwork, PCC in foundation & coping shall be measured and paid for separately. |
| 11 | M&L in replacement Stay assembly complete with 20mm dia, 1800mm long GI stay rod, with threaded ends and GI nuts, two number thimbles, MS galvanized clamps made out of 40mmx6mm flat iron including MS galvanized nuts, bolts and washers, 300mm x 300mm x 6mm MS galvanized stay plate with accessories as shown in electrical plate No. 1 (loop type insulator, stay clamps, excavation and concrete measured separately) complete all as specified and as directed. |
| 12 | M&L in replacement Loop type insulator, vitreous porcelain, white, brown or green: Large size, with overall dimensions 90mmx140mm, clearance of hole 25.5mm complete all as specified and as directed. |
| 13 | Supply and fixing in replacement GI wire 4 mm and stranded 7/1.6 mm dia fixing for cradle in road crossing and stay wire complete all as specifiedand as directed. Please Enable Macros to View BoQ information |
| 14 | Supply and fixing in replacement GI wire 4 mm and stranded 7/1.6 mm dia fixing for cradle in road crossing and stay wire complete all as specifiedand as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender