Tender For Repair And Maintenance Of Street Light Fittings, Lt Poles, Timer Panel, Pole Box, Mccbs, And Connected Items At arc-biannual rate contract Line, Abdul Hamid Vihar, Abdul Hamid Vihar Family Qtr, Arjan Vihar, Pratap Chowk Area, Mandir Marg,
Tender Value
45 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
11 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Street Light Fittings, Lt Poles, Timer Panel, Pole Box, Mccbs, And Connected Items At arc-biannual rate contract Line, Abdul Hamid Vihar, Abdul Hamid Vihar Family Qtr, Arjan Vihar, Pratap Chowk Area, Mandir Marg, Ahpu, Tauras Enclave, Aepta, Station Road, Shopping Centre, Mynamati Lines, Balwan Lines, Assu And Adjoining Area In The Area Of Age (U) Elect Supply No. Ii, Under Ge (U) Elect Supply, Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Material & labour for excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft loose soil for laying / taking up/ taking down of cables and getting out and leveling of bottom surface to required level complete all as specified and directed by Engineer- in- Charge. |
| 2 | Material & labour for returning filling in,. Including spreading, leveling,. Watering and well ramming soil in layers not exceeding 25 cm thick Complete all as specified and directed by Engineer- in- Charge. |
| 3 | Material & labour for removing excavated material (ie soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point Complete all as specified and directed by Engineer- in- Charge. |
| 4 | Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc, Complete all as specified and directed by Engineer- in- Charge. |
| 5 | Supply & Fixing sub class B bricks having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc Complete all as specified and directed by Engineer- in- Charge. |
| 6 | All as per srl item No 5 here-in-before but using old bricks obtained under srl item No 1 here in before Complete all as specified and directed by Engineer- in- Charge. |
| 7 | Material & Labour for disconnecting of damaged unserviceable underground cable and Supplying, laying, jointing testing and connecting in replacement XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) with multistranded aluminum conductors, IS 7098 marked, suitable for LT 1100 Volt system, laid in trenches fixed to pole, including jointing & testing Complete all as specified and directed by Engineer- in- Charge of following sizes:-Note :- Excavation, earth work ,cable protection , sand fillings , cable joint shall be measured and paid separately under respective items of schedule. |
| 8 | 16 Sqmm 4 core |
| 9 | 25 Sqmm 3.5 core |
| 10 | 35 Sq mm 3.5 core. |
| 11 | 50 Sq mm 3.5 core. |
| 12 | 70 Sq mm 3.5 core. |
| 13 | 95 Sqmm 3.5 Core |
| 14 | 120 Sqmm 3.5 Core |
| 15 | Material & labour for boring of hole under road/pavement/hard standing or any other situation by manual means and suitable for passing of GI pipe 40 to 100 mm bore and making good both ends Complete all as specified and directed by Engineer- in- Charge. |
| 16 | Supply & Fixing in replacement GI Pipe (light grade) with necessary accessories/ fittings for cable protections/pole for crossing of culverts/nallah of following bore sizes Complete all as specified and directed by Engineer- in- Charge. |
| 17 | 40 mm . |
| 18 | 50 mm |
| 19 | 80 mm |
| 20 | Taking out faulty underground 1100 Volt LT cable of different sizes by excavation and removing bricks of any size and relaying in the same trenches or re routing after rectification of fault or replacing faulty portion of cable with new cable and removing of surplus soil and using new bricks Complete all as specified and directed by Engineer- in- Charge.Note: (a) 1100 Volt LT cable & joints shall be measured and paid for separately under respective items of schedule. (b) Retrieved old serviceable bricks will be laid in trenches for cable protection. If extra bricks and sand required at site shall be measured and paid separately under respective items of BOQs.(c) Excavation and earth work will be measured and paid for separately under respective items of schedule. |
| 21 | Supply, fixing and testing straight through joint heat shrinkable type with jointing kit suitable for cable PVC/XLPE insulated armored heavy duty aluminum conductor 1100 Volts grade Complete all as specified and directed by Engineer- in- Charge for the following sizes :- |
| 22 | 16 -25 sqmm x 4 core |
| 23 | 35-50 sqmm ,3.5 core |
| 24 | Supply & installing steel tubular swaged poles type 410 SP-31 (9 mtr long) of apprx wt.147 kg conforming to IS 2713 (Part-II) in replacement of PCC pole including excavation, earth work, PCC foundation, base plate,PCC coping,GI pipe for cable protection, three layers of red colour Reflector etc complete all as per manufacturer's instructions and Complete all as specified and directed by Engineer- in- Charge. NOTE:- The unit rate in this item is deemed to be included the cost of exacavation and earth work in any type of soil,PCC foundation 1:4:8 type D-2 , PCC coping 1:2:4 type B-1 as in steel tubular pole. The steel pole shall be painted by bituminious paint total lenth inside and up to planting depth outside |
| 25 | Supply & installing steel tubular pole swan neck type 410 SP-31 (9 mtr long) of apprx wt.147 kg conforming to IS 2713 (Part-II) in replacement of PCC pole including excavation, earth work, PCC foundation, base plate,PCC coping,GI pipe for cable protection, three layers of red colour Reflector etc complete all as per manufacturer's instructions and Complete all as specified and directed by Engineer- in- Charge. NOTE:- The unit rate in this item is deemed to be included the cost of exacavation and earth work in any type of soil,PCC foundation 1:4:8 type D-2 , PCC coping 1:2:4 type B-1 as in steel tubular pole. The steel pole shall be painted by bituminious paint total lenth inside and up to planting depth outside |
| 26 | Supply & Fixing in replacement bracket for street light fitting complete with 1.5 to 2.2 mtr long 32/40mm dia GI pipe medium grade and including necessary mild steel clamp, nuts, bolts and washers Complete all as specified and directed by Engineer- in- Charge. |
| 27 | Material & Labour for Cutting / pruning of tree branches along security light pole around 2 mtr radius of security light and removing from site including arrangement of T&P (Axe, rope & ladder etc) Complete all as specified and directed by Engineer- in- Charge. |
| 28 | Supplying and fixing in replacement MCB SPN, 32 Amps,50 Hz,10 KA,240 Volts complete all as specified and directed by Engineer- in- Charge. |
| 29 | Supplying and fixing in replacement MCB SP , 6 to 32 Amps,50 Hz,10 KA,240 Volts complete all as specified and directed by Engineer- in- Charge. |
| 30 | Supply & Fixing in replacement KIOSK box wheather proof including made out of one piece mounted SMC base and door pole mounted hinged door size 333x233x120mm out side and 300x200x105mm inside dimensions comprising of aluminium bus bar 4 strips for 3 phase and neutral with 6 Amps MCB SP including embossing/painting of danger notice of size not less than 10cm x 7.5cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body Complete all as specified and directed by Engineer- in- Charge. |
| 31 | Material & Labour for re-painting of LT Steel tubular poles of any sizes with apply of 2 coats of aluminium paint including rubbing with wire brush/emery paper and making yellow and black strips upto height of 1.5 mtr above from ground level Complete all as specified and directed by Engineer- in- Charge. Please Enable Macros to View BoQ information |
| 32 | Material & Labour for re-painting of LT Steel tubular poles of any sizes with apply of 2 coats of aluminium paint including rubbing with wire brush/emery paper and making yellow and black strips upto height of 1.5 mtr above from ground level Complete all as specified and directed by Engineer- in- Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender