Tender For Day-To-Day Maintenance And Attending Online Complaints For B/R Assets At Rashi Area And Rs Colaba Under Age B/R-Ii, Ge (Nw) Navy Nagar.
Tender Value
70 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
4 days left
EMD
1.30 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day-To-Day Maintenance And Attending Online Complaints For B/R Assets At Rashi Area And Rs Colaba Under Age B/R-Ii, Ge (Nw) Navy Nagar.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Aug-2026 | Corrigendum | Date | 03-Sep-2026 |
| 2 | 25-Aug-2026 | Corrigendum | BOQ | 03-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., and including removal of all resulting rubbish and debris off MD premises, complete all as specified and directed. |
| 2 | Material and labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed by Engr-in-Charge. |
| 3 | Material and labour for providing and fixing GI wire chicken mesh, 22 SWG, 25 mm × 25 mm aperture, fixed with nails or approved fasteners at RCC and brick masonry junctions, walls and ceilings for plaster dubbing to prevent cracking, complete all as specified and directed by the Engineer-in-Charge. |
| 4 | Material and labour for rendering 5mm thick in CM 1:3 on ceilling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 5 | Material and labour for preparation of new plastered surface of wall by brooming down or cleaning and applying two coats of oil-emulsion distemper, white or tinted, over a coat of alkali-resistant priming paint over and including a 3 mm thick wall care putty , finished even and smooth, complete all as specified and directed. |
| 6 | Material and Labour for preparing new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 7 | Material and labour for easing of door/window shutters of any size, including adjustment of hinges, tower bolts, sliding bolts and other fittings, tightening/repositioning of hinges, adjustment of shutters for smooth operation, refixing of loose wire mesh with suitable beads, complete all as specified and directed. |
| 8 | Fixing only in repairs existing sliding door bolts, tower bolts, handles, floor door stoppers, helical door springs, hinges, hasp and staple, wooden pelmet boxes and drapery rods of any size and material, including screws, nails, nuts, bolts and other incidental fasteners, complete all as specified and directed by the Engineer-in-Charge. |
| 9 | Material and labour for minor repairs and servicing of aluminium windows, including adjustment of shutters, fixing/replacement of loose beads, screws, nuts, rubber packing/gaskets and other necessary accessories for proper alignment and smooth operation, complete all as specified and directed by the Engineer-in-Charge. |
| 10 | Material and labour for petty repairs to leaking pillar taps, stop cocks, PVC connections, bottle traps and low-level flushing cisterns, including providing and replacing rubber washers, check nuts, plungers, PTFE tape, M-seal, brass spindles (as required), GI/Brass/CPVC fittings, white cement, silicone sealant and other minor accessories required to arrest leakage and restore smooth functioning, complete all as specified and directed by the Engineer-in-Charge. |
| 11 | Material and Labour for running welding in repairs of MS hinges, helical door springs, rolling shutter spare parts, heavy MS garage doors, etc., thickness of material not exceeding 6 mm, including cleaning and preparing the surfaces to be welded and holding the members in true position while welding, complete all as specified and directed |
| 12 | Material and Labour for taking down and refixing in same opening wooden shutter of any description, exceeding 1 square metre but not exceeding 2.00 square metres each, including easing and adjusting, refixing with same hardware, renewal of unserviceable screws complete all as specified and directed. |
| 13 | Material and Labour for Renewing Non skid/Glazed ceramic tiles in patches, area not exceeding 5 square metres each, including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles, complete all as specified and directed. |
| 14 | Supplying & fixing of kicking plates, any size, of galvanised iron sheet 1 mm thick, fixed with galvanised screws complete all as specified and directed. |
| 15 | Material and Labour for 75 mm dia PVC (SWR) floor trap or Nahani trap, plain with grating, including jointing to waste pipe with solvent cement and including fixing/bedding in cement concrete type B-1 (1:2:4)complete all as specified and directed. |
| 16 | Supply and fixing in repairs 32 mm dia, 800 mm long PVC flexible waste pipe for wash basin or sink, including all necessary fittings, complete all as specified and directed. |
| 17 | Supply and fixing in repairs Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as directed ( Make : as per sample) |
| 18 | Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing),including removal of rubbish off MD premises, complete all as specified and directed. |
| 19 | Material and Labour for non-skid Ceramic tiles, coloured, 7 to 8 mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors, set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 20 mm thick screed bed (or bedding layer) of cement mortar (1:4), complete all as specified and directed. |
| 20 | Material and Labour for coloured glazed ceramic tiles, size 450 x 300 mm 7-8 mm thick, in vertical surfaces (skirting and dados), set and jointed in neat cement paste and pointed in white or coloured cement to match, over and including 10 mm thick backing coat in cement mortar 1:4, complete all as specified and directed. |
| 21 | Material and Labour for non-skid Ceramic tiles, coloured, 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors, set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 20 mm thick screed bed (or bedding layer) of cement mortar (1:4), complete all as specified and directed. |
| 22 | Material and Labour for Non-skid Ceramic tiles, white, 7 to 8 mm thick (square or rectangular), area of each tile exceeding 0.18 square metre but not exceeding 0.38 square metre, in skirting, over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement pasted and pointed in white or coloured cement to match, complete all as specified and directed. |
| 23 | Material and Labour for aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with aluminium wire staples, complete all as specified and directed. |
| 24 | S&F in repair stainless steel sink with drainage board (made out of 1 mm thick SS sheet of grade SS-304), for kitchen or laboratory, overall size 915 x 460 mm (bowl size 410 x 330 x 160 mm), including plugs, washers, waste pipe, cast iron cantilever brackets or bedding in cement mortar to dwarf wall, and connecting union to pipe, complete all as specified and directed. |
| 25 | Supplying and fixing in repairs, Health faucet (ABS body), chromium plated, suitable for 15 mm bore pipe, with 1.25 metre long flexible tube and ABS wall hook, including making connections, complete all as specified and directed. |
| 26 | Supplying and fixing in repairs, PVC valveless, syphonic action type, flushing cistern, low level, white, 10 litres capacity, conforming to IS 7231, with inlet, ball valve, float and handle including brackets,, complete all as specified and directed. |
| 27 | Supplying and fixing in repairs, vitreous china wash down water closet pan (pedestal pattern), white, with ‘P’ or ‘S’ trap, including plastic/PVC seat and cover (closed pattern with flat bottom and chromium plated or aluminised hinging device), including connecting to flushing pipe, anti-syphonage pipe and soil pipe, and including all subsidiary materials such as brass screws and sheesham wood/plastic plugs complete all as specified and directed. |
| 28 | Supply and fixing in repair plastic water closet seat cover , closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinges devices complete all as specified and directed by Engr- in -Charge |
| 29 | S&F in repairs vitreous china water closet squatting pan (Orissa pattern), size 580 x 440 mm, white, with integral foot rests, (excluding flushing cistern and flush pipe), including P or S trap, lime concrete bedding and connection to trap, flushing pipe and anti-syphonage pipe and making good to floor, complete all as specified and directed. |
| 30 | S&F in repairs Vitreous china wash basin.white, flat back, size 550 mm x 400 mm, including brackets, and including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 31 | Supply and fixing 32 mm dia Waste fittings, brass chromium plated suitable for glazed ware sinks, wash basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge. |
| 32 | Supply and fixing in repair 32 mm dia Waste fittings coupling , brass chromium plated suitable for glazed ware sinks, wash basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge. |
| 33 | Taking down LDPE PVC pipes of 32 mm bore from walls, ceiling or floors including bend and sockets etc; any type of pipe complete all as specified and directed by Engr-in-Charge. |
| 34 | Supply and fixing of LDPE PVC pipes of pressure rating 6 kgf/Sq.cm of 32 mm bore fixed complete to walls, ceiling or in floors including bend and sockets etc; any type of pipe complete all as specified and directed by Engr-in-Charge. |
| 35 | Supplying and fixing in repairs15 mm size PVC connection, with PTMT nuts, 600 mm long, complete all as specified and directed. |
| 36 | Supplying and fixing in repairs15 mm size PVC connection, with PTMT nuts, 450 mm long, complete all as specified and directed. |
| 37 | S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy, with capstan heads, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. |
| 38 | Supplying and fixing in repairs, 15 mm bore cast copper alloy stop valve (ISI marked), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed |
| 39 | Supply and fixing of Towel Ring of PTMT, including chromium plated (CP) brass screws and wooden or plastic cleats, minimum weight 90 gms complete all as specified and directed. |
| 40 | Supply and fixing in repair aluminium anodised tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge. |
| 41 | Supplying and fixing 600 mm x 450 mm bevelled edge mirror of selected quality glass,6 mm thick, mounted on PVC body (or 6 mm thick building board/plywood), fixed to wooden or plastic plugs with chromium plated brass screws and cup washers and making good of disturbed surface as per existing complete all as specified and directed. |
| 42 | Supply and fixing for in repair powder coated aluminium serrated finish 20-25mm dia curtain rod including fancy types domes cum brackets suitable for 20-25mm dia curtain rod fixed with C/P screws & rovel plugs and fixed to both ends of the curtain rod etc complete all as specified and directed by Engr-in-Charge. |
| 43 | Supply and fixing in repair anodised aluminium alloy fancy type domes cum brackets suitable for 20-25 mm dia curtainrod fixed with C/P screws & rovel plugs and fixed to both ends of the curtain rod etc complete all as specified and directed by Engr-in-Charge. |
| 44 | Supply and fixing in repair 75 mm size hasp and staple safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge. |
| 45 | Supply and fixing in repair 100mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge. |
| 46 | Supply and fixing in repair 75 mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge. |
| 47 | Supply and fixing in repair 125 mm extruded aluminium handles, fabricated type anodised fixed complete all as specified and directed by Engr-in-Charge. |
| 48 | Supply and fixing in repairs 100 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 49 | Supply and fixing in repairs 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. |
| 50 | Supply and fixing in repair magic eye fancy type of brass of dia 12 mm to 14 mm suitable upto 40 mm thickness door including drilling cutting of holes and making good all complete as directed by Engr-in-Charge. |
| 51 | Supply and fixing in repairs 100mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. |
| 52 | Supply and fixing in repairs MS 300mm ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed by Engr-in-Charge. |
| 53 | Supplying and fixing 300 mm long aluminium alloy, anodised, sliding door bolt,ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, and fixed, complete all as specified and directed. |
| 54 | Supplying and fixing in repairs 140 mm long floor door stopper,ISI marked , of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 55 | Demolition of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, approns, skirting, jamb/cill etc including removal of debries out of defence land complete all as specified and directed. |
| 56 | M & L for 20 mm thick, mirror polished, machine finished, Hard wear stone Granite (of any type) work (table rubbed and polished)in floors, steps, jambs, pillars, window-cills, cooking platforms and the like, set and jointed in cement mortar (1:4), and pointed in white cement (1:2) using marble dust with admixture of pigment to match the shade, over and including 15 mm thick screed bed (or bedding layer) of cement mortar 1:4, complete all as specified and directed. |
| 57 | Material and Labour for 20 mm thick Hardware stone Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall)in 12 mm thick cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, supplied and fixed, complete all as specified and directed. |
| 58 | Supply and fixing 4 mm thick figured glass pin headed type and glazing with aluminium and neoprene beads in square not exc 0.5 sqm in each pane including hacking out old unservicable glass complete all as specified and directed by Enginner-in-Charge. |
| 59 | Supply and fixing in repairs of plain Sheet glass, ordinary quality, 4 mm thick, and glazing in squares not exceeding 0.5 sq. m in each pane complete all as specified and directed. |
| 60 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Engr-in-Charge. |
| 61 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and directed by Engr-in-Charge. |
| 62 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame complete all as specified and directed by Engr-in-Charge. |
| 63 | Supply and fixing 100 mm size stainlesss steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge. |
| 64 | Supply and fixing 125 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 65 | Supply and fixing 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. |
| 66 | Material and labour for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC. |
| 67 | Material and Labour for preparation of old plastered or unplastered surfaces of walls and applying one coat of oil-emulsion distemper of required shade complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 03, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 days
Sep 03, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender