Tender For Repair/Polishing And Painting Of Wooden Furniture For Otm Accn At Nms Under Age (I) Nabagram
Tender Value
9 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
3 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Murshidabad → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Polishing And Painting Of Wooden Furniture For Otm Accn At Nms Under Age (I) Nabagram
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Aug-2026 | Revised BOQ | BOQ | 20-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Repair /re-canning of chair easy Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well sesoned (Teak) and fixing the same in its original position as per drawing (Drg No FD-229) |
| 2 | Front legs |
| 3 | Front rail of seat frame (Hole should be 12.5 mm apart of each other |
| 4 | Side Rail |
| 5 | Black Rail |
| 6 | Arm Rest |
| 7 | Remove the existing unsv canning and supply and weave with 2mm thick new white plastic cane oval shape Godrej pattern and beading with 4 mm thick new white plastic can make Ajay /Premier as approval by GE and providing the new hard rubber shoes on legs below of chair easy. |
| 8 | Preparation of surface by remove of existing polishing & Painting mark scratchs from all exposed wooden surfaces to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by engineer-in-Charge |
| 9 | Repair of chair Dinning (Drawing No FD-279) |
| 10 | Remove the existing unserviceable/broken 12mm ply seat from chair dinning and supply & fixing the new 12mm ply seat 4mm existing size in its original position, all as directed by Engr-in-Charge and shown on drg |
| 11 | Remove of existing unserviceable under mentioned members nad providing the new one made out of 1st class HW well seasoned (Teak Wood) and fixing the same in its, original position all as directed by Engr-in-Charge and shown on drg |
| 12 | Front leg, all as directed by Engr-in-Charge and shown on drg. |
| 13 | Rear leg, all as directed by Engr-in-Charge and shown on drg |
| 14 | Front rail of seat frame, all as directed by Engr-in-Charge and shown on drg. |
| 15 | Side Rail, all as directed by Engr-in-Charge and shown on drg |
| 16 | Back rail, all as directed by Engr-in-Charge and shown on drg |
| 17 | Short stiffener (390x390mm), all as directed by Engr-in-Charge and shown on drg. |
| 18 | 75 mm thick, 32 density cushion (Kurlon) |
| 19 | Back Rest Batten |
| 20 | Preparation of surface by remove of existing polishing & Painting mark scratchs from all exposed wooden surfaces to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by engineer-in-Charge. |
| 21 | Repair of chair Writing (Drawing No FD-280) |
| 22 | Remove the existing u/s canning and supply and weave with 2mm thick new white plastic cane oval shape Godrej pattern and beading with 4 mm thick new white plastic can make Ajay /Premier as approval by GE and providing the new hard rubber shoes on legs below of chair easy. |
| 23 | Preparation of surface by remove of existing polishing & Painting mark scratchs from all exposed wooden surfaces to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by engineer-in-Charge. |
| 24 | Front leg, all as directed by Engr-in-Charge and shown on drg. |
| 25 | Rear leg, all as directed by Engr-in-Charge and shown on drg. |
| 26 | Front rail of seat frame, all as directed by Engr-in-Charge and shown on drg. |
| 27 | Side Rail, all as directed by Engr-in-Charge and shown on drg. |
| 28 | Back rail, all as directed by Engr-in-Charge and shown on drg. |
| 29 | Short stiffener (390x390mm), all as directed by Engr-in-Charge and shown on drg. |
| 30 | Table dining 6 Pers (MAP) (FD/MAP-II/03) |
| 31 | Removing old broken damaged top of table dining OR and S&F new top made out of 18/19mm thick prelaminated particle board one side teak veneered phenol formal dehyde exerior grade with 19x4mm teakwood beading fixed with headless nails all around the top. Top will be covered with Almn steel 20 gauge, all as directed by Engr-in-Charge and shown on drg. |
| 32 | Removing old & U/S legs of table dinning 6 pers & S/F new legs of size 750x45x90mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoes at the bottom of legs with mild steel screws complete, all as directed by Engr-in-Charge and shown on drg. |
| 33 | Taking out old & U/S long rail and S/F new leg rail of size 1500x45x90mm made out of 1st class well seasoned teakwood complete, all as directed by Engr-in-Charge and shown on drg. |
| 34 | All as per item No 4.02 here-in-before but short top rail of size 900x45x90mm, all as directed by Engr-in-Charge and shown on drg. |
| 35 | Removing old & U/S MS right angle from the corner of table dining 6 pers and providing and fixing new one of size 150x30x5mm with mild steel screws complete, all as directed by Engr-in-Charge and shown on drg. |
| 36 | Preparation of surface by remove of existing polishing & Painting mark scratchs from all exposed wooden surfaces to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by engineer-in-Charge. |
| 37 | Table writing (FD-275) |
| 38 | Remove the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on top of table writing in its original position as per drg, and providing new hard rubber/PVC/Nylon shoes to the bottom of legs, all as directed by Engr-in-Charge |
| 39 | Taking out old sides of table writing and S/F new sides made out of 19mm prelaminated particle board one side teak veneered complete, all as directed by Engr-in-Charge and shown on drg. |
| 40 | Removing of old U/S shutters of table writing and S/F new shutter made out of 19mm thick prelaminated particle board one side teak veneered bonded with phenol formaldehyde exterior gde including fixing of new or old serviceable hinges 50mm MS medium wt complete, all as directed by Engr-in-Charge and shown on drg. |
| 41 | Taking out old & U/S drawers from table writing and S/F new drawers made out of prelaminated particle board & 1st class well seasoned teakwood for sides & 6mm thick commercial plywood for bottom of drawers complete, all as directed by Engr-in-Charge and shown on drg. |
| 42 | Removing of U/S MS hinges from shutters and S/F MS butt hinges 50mm medium wt cold roller mild steel, all as directed by Engr-in-Charge and shown on drg. |
| 43 | Removing of u/s knobs from shutters & drawers of table writing and supply & fix new 35mm round brass knob of approved quality complete, all as directed by Engr-in-Charge and shown on drg. |
| 44 | Taking out old & U/S plywood back of table writing & S/F new 6mm thick 5 plywood commercial BWR gde type BB fixed with 20mm mild steel screws complete all as directed & shown on drg. |
| 45 | Taking out old U/S long legs of table writing and S/F new long legs made out of 1st class teak wood complete, all as directed by Engr-in-Charge and shown on drg. |
| 46 | All as item No 5.08 mentioned here-in-before but short legs of table writing, all as directed by Engr-in-Charge and shown on drg. |
| 47 | Remove the old existing long stiffener of table writing and S/F new long stiffner made out of 1st class well seasoned teak wood of existing shape & size and making functional, all as directed by Engr-in-Charge and shown on drg. |
| 48 | Preparation of surface by remove of existing polishing & Painting mark scratchs from all exposed wooden surfaces to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by engineer-in-Charge. |
| 49 | Peg Table (FD-384) |
| 50 | Remove the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on top of Peg Table in its original position as per drg, all as directed by Engr-in-Charge |
| 51 | Taking out old U/S sides of Peg Table and S/F new sides made out of 19mm prelaminated particle board one side teak veneered complete, all as directed by Engr-in-Charge and shown on drg. |
| 52 | Taking out old U/S long legs of Peg Table and S/F new long legs made out of 1st class teak wood complete, all as directed by Engr-in-Charge and shown on drg. |
| 53 | Preparation of surface by remove of existing polishing & Painting mark scratchs from all exposed wooden surfaces to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by engineer-in-Charge. |
| 54 | Teapoy (FD-382) |
| 55 | Remove the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on top of teapoy in its original position as per drg, all as directed by Engr-in-Charge |
| 56 | Taking out old U/S sides of teapoy and S/F new sides made out of 19mm prelaminated particle board one side teak veneered complete, all as directed by Engr-in-Charge and shown on drg. |
| 57 | Taking out old U/S long legs of teapoy and S/F new long legs made out of 1st class teak wood complete, all as directed by Engr-in-Charge and shown on drg. |
| 58 | Preparation of surface by remove of existing polishing & Painting mark scratchs from all exposed wooden surfaces to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by engineer-in-Charge. |
| 59 | Display Board (1200x900) Board Notice (FD-99M) |
| 60 | Remove the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on top of teapoy in its original position as per drg, all as directed by Engr-in-Charge |
| 61 | Taking out old U/S sides of teapoy and S/F new sides made out of 19mm prelaminated particle board one side teak veneered complete, all as directed by Engr-in-Charge and shown on drg. |
| 62 | Taking out old U/S long legs of teapoy and S/F new long legs made out of 1st class teak wood complete, all as directed by Engr-in-Charge and shown on drg. |
| 63 | Preparation of surface by remove of existing polishing & Painting mark scratchs from all exposed wooden surfaces to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by engineer-in-Charge. |
| 64 | Table Bed side FD/E6/MAP/15 (R) |
| 65 | Remove the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on top of teapoy in its original position as per drg, all as directed by Engr-in-Charge |
| 66 | Taking out old U/S sides of table bed side and S/F new sides made out of 18mm prelaminated particle board one side teak veneered complete, all as directed by Engr-in-Charge and shown on drg. |
| 67 | Taking out old U/S long legs of table bed side and S/F new long legs made out of 1st class teak wood complete, all as directed by Engr-in-Charge and shown on drg. |
| 68 | Preparation of surface by remove of existing polishing & Painting mark scratchs from all exposed wooden surfaces to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 20, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender