Tender For Provision Of Stp In Smq Area Alongwith Allied Works At Deolali Under Ge (Af) Ojhar
Tender Value
5.57 Crore
Estimated cost
Bid Submission
09 Sep 2026
32 days left
EMD
6.03 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Stp In Smq Area Alongwith Allied Works At Deolali Under Ge (Af) Ojhar
BOQ
| Sl. No. | Item Description |
| 1 | Lumpsum price worked out by the contractor for “BUILDINGS AND STRUCTURES” as listed in Sch 'A' part I above/below the lumpsum price of Rs.31,00,000.00 as inserted by MES for Sch ‘A’ part I |
| 2 | Lumpsum price worked out by the contractor for “SITE CLEARANCE/ EARTHWORK” as listed in Sch '‘A” part II above/below the lumpsum price of Rs.9,32,460.78 as inserted by MES for Sch ‘A’ part II |
| 3 | Lumpsum price worked out by the contractor for “INTERNAL WATER SUPPLY” as listed in Sch '‘A” part III above/below the lumpsum price of Rs. 16,831.35 as inserted by MES for Sch ‘A’ part III |
| 4 | Lumpsum price worked out by the contractor for “INTERNAL ELECTRIFICATION” as listed in Sch '‘A” part-IV above/below the lumpsum price of Rs. 27,317.40 as inserted by MES for Sch ‘A’ part IV |
| 5 | Lumpsum price worked out by the contractor for “EXTERNAL WATER SUPPLY\\" as listed in Sch ‘A” part V representing above/below the lumpsum price of Rs. 2,77,218.72 inserted by MES for Sch ‘A’ Part V |
| 6 | Lumpsum price worked out by the contractor for “EXTERNAL ELECTRIFICATION\\" as listed in Sch ‘A” part VI representing above/below the lumpsum price of Rs. 4,99,178.90 inserted by MES for Sch ‘A’ Part VI |
| 7 | Lumpsum price worked out by the contractor for “SEWAGE DISPOSAL” as listed in Sch ‘A” part VII representing above / below the lumpsum price of Rs. 10,79,583.70 as inserted by MES for Sch ‘A’ Part VII |
| 8 | Lumpsum price worked out by the contractor for “ROAD/PATH” as listed in Sch ‘A” part VIII representing above / below the lumpsum price of Rs. 15,70,614.09 as inserted by MES for Sch ‘A’ Part VIII |
| 9 | Lumpsum price worked out by the contractor for “CHAIN LINK FENCING” as listed in Sch ‘A” part IX representing above / below the lumpsum price of Rs.18,11,877.06 as inserted by MES for Sch ‘A’ Part IX |
| 10 | Lumpsum price worked out by the contractor for “AREA DRAINAGE” as listed in Sch ‘A” part X representing above / below the lumpsum price of Rs.8,81,978.42 as inserted by MES for Sch ‘A’ Part X |
| 11 | Lumpsum price worked out by the contractor for “SHED FOR PUMPING STATION” as listed in Sch ‘A” part XI representing above / below the lumpsum price of Rs.4,24,955.84 as inserted by MES for Sch ‘A’ Part XI |
| 12 | Lumpsum price worked out by the contractor for “STANDBY DG SET” as listed in Sch ‘A” part XII representing above / below the lumpsum price of Rs.71,899.40 as inserted by MES for Sch ‘A’ Part XII |
| 13 | SCH 'A' PART XIII (MISC B/R & E/M ITEMS) Note:- Excavation and earthwork to the extent required for execution of relevant item under this schedule unless otherwise specified shall be measured and paid under relevant items of Sch 'A' Part-II. |
| 14 | (A) INTERNAL WATER SUPPLY |
| 15 | Supply and fix angle valves of size 15mm bore, fancy type chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 16 | Supply and fix 20mm dia CPVC gate valve, screwed down both ends for CPVC pipe complete all as specified and directed. |
| 17 | (B) INTERNAL ELECTRIC SUPPLY |
| 18 | Material and labour for Point wiring with two single core 1100 V grade FRLSH insulated unsheathed cables of size 1.5 Sq mm multi-stranded Copper conductor FRLSH drawn through and including rigid PVC conduit and conduit accessories including concealed wiring including breaking of walls and making good to disturbed surfaces in wall/roof/ceiling where required complete with factory made flush box of suitable size including modular base and front mounting sheet cover with an earth wire of PVC cable 1.5 Sqmm FRLSH multi stranded copper conductor and connected to all metal boxes and common earth dolly complete all as specified and as directed. One light/fan point controlled by one, one-way switch |
| 19 | All as per Item No. 13.04 above but One switch socket combination 5 Amps on the same board |
| 20 | All as per item No.13.04 described here - in - before but for 3/6 pin 5 Amps switch socket combination on independent board with 1.5 Sqmm copper cable and provision of 1.5 Sqmm FRLSH PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and as directed. |
| 21 | All as per item No. 13.04 described here - in - before but for 3/6 pin 15 Amps switch socket combination on independent board with 2.5 Sqmm copper cable and provision of 2.5 Sqmm FRLSH PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and as directed. |
| 22 | Supply and fix in repair Sheet metal enclosures for DBs single pole 4 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement complete all as specified and as directed. |
| 23 | Supply and fix LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including Stellar bright 20 watt TLED box type complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting with PVC round block 02 nos for mounting etc complete all as specified and as directed. |
| 24 | Supply and fix LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including Stellar bright 10 watt TLED box type complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting with PVC round block 02 nos for mounting etc complete all as specified and as directed. |
| 25 | Supply and fix LED Security light fiiting 25 W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary suitable clamps & bracket complete all as specified and as directed. |
| 26 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300mm cutting well and with fixing arrangements all as specified and directed. |
| 27 | (C) EXTERNAL WATER SUPPLY |
| 28 | Supply, install & testing & commsioning of Sewage submersible pump-set(non clog) operating on single phase 240V electric motor, having Head not less than 15 mtrs with discharge rate of not less than 420 LPM of capacity with Float Switch and submersible cable & suitable length HDPE pipe, fittings & SS-304 nut, bolts & washers to make connection with delivery pipes etc complete all as specified and directed. |
| 29 | Material & Labour for construction of valve pit chamber of internal size 1200x1200x1000mm including necessary excavation, returning, filling-in, and removal of surplus soil to a distance not less than 250 m, 100 mm thick PCC (1:4:8) Type - D-2 (using 40 mm graded stoneaggregate) in foundation, 230 mm thick brick work in cement mortar (1:4), PCC 1:2:4 TypeB1 (using20 mm graded stone aggregate) for coping including necessary form work, 15 mm thick plastering in cement mortar (1:4) including 5 mm thick MS sheet cover fixed on MS angle iron 50x50x6 mm, painting with 2 coats of synthetic enamel paint over a coat of red-oxide primer on all steel/iron/surfaces and provision of suitable locking arrangement complete all as specified and directed. |
| 30 | (D) EXTERNAL ELECTRIC SUPPLY |
| 31 | Material & Labour for fixing of DWC pipes it should be flexible & should allow deformation in diameter as well as In joints under external load & soil natural movement, socket & spigot joint with electrometric sealing ring , it should be highly corrosive resistant & it should be impact resistant, chemical resistant, flexible & light weight of size 50 mm ID & 63 mm outer dia complete with coupler, elbows, joints & necessary space parts complete all as specified and directed. |
| 32 | Material & Labour for fixing of DWC pipe conforming to IS 16098 (Part 2), having minimum stiffness class SN8 (8 kN/m²) suitable for underground applications) it should be flexible & should allow deformation in diameter as well as In joints under external load & soil natural movement, socket & spigot joint with electrometric sealing ring , it should be highly corrosive resistant & it should be impact resistant, chemiacal resistant, flexible & light weight of size 103.5 mm ID & 120 mm outer dia complete with coupler, elbows, joints,& necessary space parts complete all as specified and directed. |
| 33 | Cutting the existing concrete/bituminous road/PCC surface width not exceesing 30 cm and making good of surface with 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate finsihed even and fair complete over 100mm thick PCC 1:4:8 type D2 using 40mm stone aggregate over consolidated/rammed earth surface & making hole on wall or clamping on wall wherever its necessary all as specified & directed. |
| 34 | Material & Labour for boring hole under the existing road,Pavement, Hard standing not less than 0.7 meter below GL by trenchless technology using ultrasound Technique by bdoing excavation at both side and Passing the seamless 150 mm dia HDPE Pipe conforming to IS 4984, made from PE100 grade material, of SDR 26 (or suitable SDR corresponding to 0.4 MPa working pressure) complete all as specified and directed |
| 35 | Material & Labour for Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.00 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to GI strip 32 x 6 mm as earthing lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including 20 mm bore midium grade GI Pipe with , MS funnel with wire mesh,.watering arrangement and 50 mm bore light grade GI pipe for earth lead protection from earth plate to test point or pannel connceting point , PCC chamber ,CI cover with frame etc including necessary excavation in any type of strata, returning, filling , removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part - I, connected to Earthing test point all as specified and directed and testing on completion all as specified and directed |
| 36 | Supply ,installing, testing and commissioning ,factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar rating 125 Amps installed on porcelain insulators |
| 37 | housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size,the panel shall be dust and vermin proof,IP-54 class protection and made of 3mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej(freedom)lock with 2 keys)and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc.,independent chambers to accommodate complete all as specified and directed including the following accessories:-(a) MCCB 100 Amps 4 pole, 25KA - 01 No (Incoming)(b) MCB TP 16A, 10KA - 03 Nos (Outgoing)(c) MCB TP 32A, 10KA - 03 Nos (Outgoing)(d) Digital Ammeter 0 - 400 Amp - 01 No(e) Digital Voltmeter 0-500 V - 01 No(f) Indicator lamp set (R,Y,B) - 01 No |
| 38 | Supply ,installing, testing and commissioning ,factory made and tested CPRI approved LT panel board out door type, hood on top, weather, vermin proof, platform mounted, suitable for 415 Volts,3 Phase 4 wire 50 HZ AC supply system all as specified and directed, with necessary bus bar arrangement with insulated aluminium bus bar 100 Amps rating installed on porcelain insulators |
| 39 | housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size,the panel shall be dust and vermin proof,IP-54 class protection and made of 3mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground/PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement(including provision of 65mm Godrej(freedom)lock with 2 keys)and duly powder coated on the out side and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable etc.,independent chambers to accommodate complete all as specified and directed including the following accessories:-(a) MCCB 63 Amps 4 pole, 25 KA - 01 No (incoming)(b) MCB TP 16A, 10KA - 03 Nos(c) Digital Ammeter 0 - 400 Amp - 01 No(d) Digital Voltmeter 0-500 V - 01 No(e) Indicator lamp set (R,Y,B) - 01 No |
| 40 | (E) ROAD/PATH |
| 41 | Material and labour for 150 mm thick ( compacted thickness) WBM in two layers each of 75 mm thick ( each layers to be rolled and consolidated separately) with coarse aggregate trap or balast of grading 2 ranging from 63mm to 40mm hollows made upto from true surface, spread, surface binding with and including screening and moorum, watered, consolidated and rolled with 8 to 10 tonnes roller to gradient and camber required complete all as specified and as directed. |
| 42 | (F) CHAIN LINK FENCING |
| 43 | Supply & Fix 10mm dia MS bars as in strainers for chain link fencing including necessasary welding and fixing to angle iron complete all as specified and directed. |
| 44 | (G) STP |
| 45 | Design, Supply & Installation, Commissioning of 150 KLD capacity MBBR based Package STP and giving satisfactory trials of STP consisting of following auxilary equipment: Inlet Chamber, fine bar screen chamber (SS manual Bar screen), oil & grease remover (RCC), Grit separator, equalization tank(Made in RCC, Capacity 40.90 m3) , Anoxic Tank(made up of MS Epoxy painted, Capacity 13.6 m3), MBBR Tank(made up of MS Epoxy painted, capacity 55 m3), Tube settling Tank(made up of MS Epoxy painted, Capacity 21 m3), Clarified water tank(made up of MS Epoxy painted, Capacity 13.63 m3), Sludge Holding Tank( made up of HDPE, Capacity 2 m3), Treated water tank(Made in RCC, Capacity 13.63 m3), Raw Sewage Transfer Pump (Submersible pump,CI Casing & SS Impeller, Qty-02 nos, Flow 6.81 m3/hr @ 10-15 m head), Sludge Recirculation Pump(Monoblock centrifugal pump, CI Casing & CI Impeller,Qty-02 nos, Capacity 3.40 m3/hr @ 10-15 m head), Filter feed Pump(Qty-02 nos, Flow 6.81 m3/hr @ 25 m head), Twin lobe Air Blowers for MBBR( Qty 2 nos,Capacity 200m3/[email protected] bar pressure), |
| 46 | Air Dispersion System(Fine bubble, coarse bubble Air Diffuser), MBBR Media (Specially Fabricated rigid non flammable UV Stablized PVC, Tube settler media, Pressure sand filter(Qty-01 nos,UPVC Sch 40 frontal piping,made in FRP/MS Epoxy painted,Fine sand with supporting gravels),Activated Carbon filter(Qty-01 nos,UPVC Sch 40 frontal piping,made in FRP/MS Epoxy painted,Activated Carbon with supporting gravels), Chlorine Dosing System(Qty-01 no., Capacity 0-6 LPH, Capacity of tank-50 Ltr,made of HDPE), Alum Dosing System(Qty-01 no., Capacity 0-6 LPH, Capacity of tank-50 Ltr,made of HDPE), Anoxics Mixture, Centrifuge feed pump (Capacity 1 Hp,for dewater the sludge and form dry sludge) with Instruments/indicators & controllers(Rotameter for online flow indicator, level switch, pressure gauge),Interconnecting Pipes & Fittings, Control Panel(Bus bar of Required size, Controlling cable, Panel and all necessary auxiliaries ), Associated piping works with required valves,gate,drain, pathways, electrical control panel with interconnecting cable, Earthing etc. all as specified and directed. |
| 47 | INLET PARAMETERS :(i) BOD < 200-300 mg/L(ii) COD < 350-450 mg/L(iii) TSS < 250- 300 mg/L(iv) PH 6.0 to 8.5(v) Oil & Grease < 40 mg/L(vi) T-N < 50 mg/L(vii) T-Phosphorus < 7 mg/LEffluent (treated) Sewage Parameter :(i) BOD < 10 mg/L(ii) COD < 50 mg/L(iii) TSS < 10 mg/L(iv) PH = 6.0 to 8.5(v) Oil & Grease < 10 mg/L(vi) T-Nitrogen < 10 (vii) T-Phosphorus < 1(viii)Faecal Coliform - NIL(ix) Odour - No Foul Order Please Enable Macros to View BoQ information |
| 48 | INLET PARAMETERS :(i) BOD < 200-300 mg/L(ii) COD < 350-450 mg/L(iii) TSS < 250- 300 mg/L(iv) PH 6.0 to 8.5(v) Oil & Grease < 40 mg/L(vi) T-N < 50 mg/L(vii) T-Phosphorus < 7 mg/LEffluent (treated) Sewage Parameter :(i) BOD < 10 mg/L(ii) COD < 50 mg/L(iii) TSS < 10 mg/L(iv) PH = 6.0 to 8.5(v) Oil & Grease < 10 mg/L(vi) T-Nitrogen < 10 (vii) T-Phosphorus < 1(viii)Faecal Coliform - NIL(ix) Odour - No Foul Order Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 32 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 39 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender