Tender For Periodical Services /Repair To W/S Installation And E/M Installation At Mendhar, Bg, Balnoi And Hamirpur Under Age B/R-I Of Ge 881 Ews
Tender Value
18 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
17 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services /Repair To W/S Installation And E/M Installation At Mendhar, Bg, Balnoi And Hamirpur Under Age B/R-I Of Ge 881 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: PERIODICAL SERVICES /REPAIR TO W/S INSTALLATION AND E/M INSTALLATION AT MENDHAR, BG, BALNOI AND HAMIRPUR UNDER AGE B/R-I OF GE 881 EWS Contract No : GE/PNH-59/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5Sqm and not exceeding 4Sqm each, complete all as specified and directed. |
| 3 | PCC type B-0 1:2:4 (using 12.5mm graded stone aggregate ) in filling of holdfast and steel door frames etc complete all as specified and directed. |
| 4 | Factory made pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type B-0 (1:3:6) in back filling of chowkats & tarring back of chowkats and hold fasts complete all as specified & directed. |
| 5 | Factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type B-0 (1:3:6) in back filling of chowkats & tarring back of chowkats and hold fasts complete all as specified & directed. |
| 6 | Applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide zinc chrome primer to new or previously untreated steel surfaces not exc 10cm width or girth including preparation of surfaces, complete all as specified and as directed. |
| 7 | 35mm thick 2nd class hard wood plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified & directed. |
| 8 | 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified & directed. |
| 9 | Preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer,complete all as specified & directed. |
| 10 | Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each, complete all as specified and directed. |
| 11 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified and directed. |
| 12 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 13 | Factory made solid panel PVC door shutter 30mm thick(Stiles) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded plain coloured PVC,C, channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame with 3 Nos stainless steel hinge 100 mm size, welded/sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement. S&F in the frame as per manufacturer's instructions complete all as specified and directed. |
| 14 | Stainless steel wire cloth 0.36 nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified & directed. |
| 15 | Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed. |
| 16 | 250mm long aluminium alloy anodized sliding door with haps, staple (bolt type) and fixing clips of sheets, cast or extrusted sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 17 | Extruded aluminium alloy handles, fabricated type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 18 | 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 19 | S&F in repair floor door stopper of aluminium alloy body with over all length of cover plate of 140mm and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 20 | Hacking out old broken glass (any thickness, size, quality or description) from wooden / steel frames or stone/ concrete, glazed with putty or fixed with beads, complete all as specified and directed. |
| 21 | Sheet glass ordinary quality, 3mm thick, glazing with rubber neoprene packing to aluminium frame in squares not exceeding 0.50 Sqm in each pane fixed in repairs, complete all as specified. |
| 22 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed. |
| 23 | Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. with & including 5.5mm thick sheet glass ordinary quality, complete all as specified & directed. |
| 24 | Sheet glass ordinary quality, 5.5mm thick, glazing with rubber neoprene packing to aluminium frame in squares exceeding 0.50Sqm in each pane fixed in repairs, complete all as specified & directed. |
| 25 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified and directed. |
| 26 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 27 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws asspecified complete all as specified and directed. |
| 28 | Dismantling of timber scantling 40sqcm and over in section unframed work,as in any position, complete all as specified and directed. |
| 29 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 30 | Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 410W(Gde E-250), quality 'A' complete all as specified and directed. |
| 31 | Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 32 | 4mm thick non asbestos fiber board of size 600mmx600mm fixed or laid /inserted to powder coated GI frame work grid size 605x605mm and including 3mm thick GI wire at every 1200mm c/c of required length fixed in RCC roof /truss and etc including taking down old existing ceiling board with filling and complete all as specified and directed by Engr- in -Charge ”. |
| 33 | Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 34 | Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 35 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically described complete all as directed by Engineer-in-Charge. |
| 36 | 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base floor finishing surface even and fair, complete all as specified. |
| 37 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 38 | Vitrified Ceramic tiles 8 to 10 mm thick area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4,complete all as specified and as directed by Engr-in-Charge |
| 39 | Description all as per item No 36 above but as in vertical surface in skirtings,dados including 10 mm thick back coat in CM 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 40 | Taking down cement plaster from brick or stone walls hacking for keys & scrubbing down with water including raking of joints etc as in patches complete all as specified and directed. |
| 41 | Rendering 15mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 42 | Rendering 10mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar 1:6 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 43 | Rendering 5mm thick on fair faces of ceiling using cement mortar 1:3 and finished the surface even and smooth without using extra cement, complete, all as specified and directed. |
| 44 | Preparation of newly plastered or unplastered surface of wall and applying two coats of cement base paint over a coat of Primer complete all as specified and directed. |
| 45 | Preparation of newly plastered or unplastered surface of wall and applying two coats of Oil Bound Distemper (any tint) over a coat of primer including 3mm thick wall care putty complete all as specified and directed |
| 46 | Preparation of newly plastered or unplastered surface on ceiling and applying two coats of white wash complete all as specified and directed. |
| 47 | Preparation of old plastered surface of wall and applying one coats of cement base paint in camouflage pattern complete all as specified and directed. Note:- Camouflage pattern shall be approved by Engineer in charge. |
| 48 | Preparation of old plastered surface of wall and applying one coats of Oil Bound Distemper (any tint) complete all as specified and directed |
| 49 | Preparation of old plastered surface on ceiling and applying one coats of white wash complete all as specified and directed. |
| 50 | Preparation of old wooden surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint of Ist quality ,complete all as specified & directed. |
| 51 | Preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint of Ist quality ,complete all as specified & directed. |
| 52 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 53 | GI tubing 15mm bore pipe medium grade and connection including all fittings, cutting, threading and fixing to walls, ceiling or in floors complete all as specified and directed. |
| 54 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 55 | GI tubing 20mm bore pipe medium grade and connection including all fittings, cutting, threading and fixing to walls, ceiling or in floors complete all as specified and directed. |
| 56 | S&F in repair 15mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed. |
| 57 | S&F in repair 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed. |
| 58 | 500 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed. |
| 59 | 1000 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed. |
| 60 | Tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm 45gms /25mm- 65gms) complete all as specified and directed |
| 61 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore fixed in repair, complete all as specified and directed. |
| 62 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 15mm bore fixed in repair, complete all as specified and directed. |
| 63 | Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 64 | 15mm bore Stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and directed. |
| 65 | S &F in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule complete, all as specified & directed. |
| 66 | 15mm bore Stop valve/Angle valve cast copper alloy chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, complete all as specified and directed. |
| 67 | Wall mounted corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf of 12cm wide with cromium plated bracket guard and railing 60cm long and fixed in position complete in all respect as specified & directed. |
| 68 | Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, snow white, with 'P' or 's' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and siphonage pipe etc. fixed in repairs including lime concrete bedding, complete, all as specified & directed. |
| 69 | S&F in repair vitreous China wash down water closet pan (pedestal pattern),white (excluding fixing bolt,flushing cistern and flushing pipe) complete all as specified & directed. |
| 70 | S&F in repair Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised or PVC hinging device fixed in repairs, complete all as specified & directed.. |
| 71 | S&F in repair PVC valve less, symphonic action type flushing cistern 10 ltrs capacity low level, with inlet, ball valve float, flush pipe and handle including brackets complete all as specified & directed. |
| 72 | Vitreous china wash hand basin, white , flat back, size 580 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand coplete all as specified and directed. |
| 73 | Dismantling of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified and directed. |
| 74 | Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 75 | 18-20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and and moulding the edges, complete all as specified and directed. |
| 76 | Wall mounted corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf of 12cm wide with cromium plated bracket guard and railing 60cm long and fixed in position complete in all respect as specified & directed. |
| 77 | S&F in repair 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround, mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws, complete all as specified and directed. |
| 78 | Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe, fixed in repair complete all as specified and directed. |
| 79 | S & F in repairs Vitreous China half stall type of white with grating and union for discharge pipe (including flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 80 | S & F in repairs flexible waste pipe for wash hand basin fitted to Wash Hand Basin incl all necessary brackets etc all as specified and directed by Engr-in-Charge. |
| 81 | PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed, complete all as specified and directed. |
| 82 | Stainless steel decorative curtain rod 25mm dia with decorative head on both end of rod and necessary clamps / fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 83 | PVC (SWR), type B, 75mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe(vent pipe), fixed in repair, complete all as specified and directed. |
| 84 | PVC (SWR), Type B, 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe(vent pipe), fixed in repair, complete all as specified and directed. |
| 85 | Roughing surface of old concrete floor by picking, sweeping and cleaning by using steel wire brush and washing down with water, fanning etc complete all as specified and directed. |
| 86 | Providing cement concrete in roof type B-0 1:2:4 (using 12.5mm graded aggregate ) as in PCC bed complete all as spcified and directed. |
| 87 | 10mm thick screed bed or bedding layers in cement mortar (1:4) on roof slab icluding parapet and including mixing of liquid water proofing compound @ 200 ml per 50 kg of cement bag complete all as specified and as directed.(NOTE: WPC to be measured and paid seperately) |
| 88 | Material and labour for roof surface treated with PU Elastoseal primer to seal the pores and enhance the adhesion of the coating, supplying and applying single component waterproofing liquid membrane based on pure, elastomeric, polyethene resin cold applied of spray/brush applied membrane with an elongation of 650%+50 and tensile strength not less than 2 Mpa. crack bridging ability not less than 2mm. No leakage upto 5 bars of water pressure. Shore Hardness > 50 Shore. The minimum thickness to be applied shall be 1.5mm (overall) in two layers (each layer 750 micron) or as per manufacturers instructions so as to achieve thickness not less than 1.5mm including providing & laying of protective Geotextile fabric 150 GSM over than entire membrane with proper overlaps of 75mm complete all as specified and as directed by Enge-in-charge.Note: (i) The treatment shall be carried out by authorised applicator approved by GE as per the manufacturer. (ii) Payment will be made after providing warranty certified from the company.( Makes of PU Primer/Membrane SIKA/BASF, BERGER/STP FOSROC/SAINT GOBAIN, PIDILITE.) |
| 89 | Supply only liquid water proofing admixture. |
| 90 | Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level and reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 91 | Plain cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregates) as in mass concrete, filling in foundation complete all as specified and directed. |
| 92 | Laying/spreading of sand as in cushion to precast concrete interlocking paver block incl watering & consolidating complete all as specified and directed. |
| 93 | Rubber moulded machine pressed precast concrete coloured interlocking paver block with grey cement and colour pigment, any shape and size confirming to IS 15658-2006 of 80mm thick, M-40 grade complete all as specified and directed. |
| 94 | Chequered cement concrete tiles 300mmx300mmx25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors/path including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 95 | 50 mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 96 | Supply and spread gravel of 50mm thickness rolled and consolidated to gradient and camber required complete all as specified and directed. |
| 97 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complte all as specified and directed. |
| 98 | Mild steel as in posts and struts, angle horn in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securring wire mesh etc) including screwed to be fitted with washers and one hexagonal or square nut length and all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 99 | Dismantling fencing wire mess and any type of fencing etc, complete all as specified and directed. |
| 100 | Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails straining bolts etc including provission of binding wire complete all as specified and directed. |
| 101 | Supply only chain link MS galvanised fencing any size or type complete all as specified and directed. |
| 102 | Framed work such as grills, gratings, steel doors etc with end of bars shouldered or riveted or forged into spikes, framed guard bars confirming to Fe-290, Gde-E-165 all as specified and directed. |
| 103 | 75 mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 104 | PCC 1:3:6, type C-2 (using 40mm graded aggregate) as in surface channels and drains complete all as specified and directed . |
| 105 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed . |
| 106 | Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level and reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 107 | Precast cement concrete 1:2:4, type-B1 (using 20mm graded crushed stone aggregate) as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 108 | TMT bars 08mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified and directed. . |
| 109 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed . |
| 110 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 111 | Walling of random rubble stone masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed. |
| 112 | All as per Srl item no 109 above but except stone. |
| 113 | Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 114 | Providing Precast cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone agg) as in PCC bonders set in CM 1:6 all as specified and directed. |
| 115 | Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt all as specified and directed. |
| 116 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm to face (granite,trap and basalt stone) and dressing of face beds and joints, complete all as specified and directed.. |
| 117 | Raised pointing to random rubble masonry, or polygonal rubble, uncoarsed or brought upto courses in cement mortar 1:4, complete all as specified and directed. |
| 118 | Stone boulder filling hand packed tightly (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and directed |
| 119 | Taking down cement plastering on lathing (other than wire-netting), without removing lathing in cement morter complete all as specified and directed. |
| 120 | Rendering 15 mm thick in cm 1:4 (incl a coat of cement slurry @ 500 gms per Sqm) stone masonry surfaces or surface other than fair face of brick work or on one side of lathing finshed even and fair with out using extra cement complete all as specified and directed |
| 121 | Preparation of newly plastered or unplastered surface of wall and applying two coats of cement base paint in (single/camouflage) pattern complete all as specified and directed. Note:- Camouflage pattern shall be approved by Engineer in charge. |
| 122 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 4 sqm and not exc 7 Sqm each complete all as specified and directed. |
| 123 | Steel rolling shutters, 1.25mm thick of laths, with and incl ball bearing, as specified including top cover, an coring rod, hasp and staple and one shop coat of primer; erected in position as indicated,( push pull or manual type) complete all as specified and directed. |
| 124 | Repair to Steel rolling shutters, any thickness or size, with and incl ball bearing if required, top cover, an coring rod, hasp and staple,( push pull or manual type) complete all as specified and directed. |
| 125 | Preparation of new steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint of Ist quality ,complete all as specified & directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender