Tender For special Repair To Bldg No T-5, T-6, T-9 And T-11 (Pers Line/Stores) At Mh Roorkee Under Ge Roorkee
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Aug 2026
16 days left
EMD
99440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-5, T-6, T-9 And T-11 (Pers Line/Stores) At Mh Roorkee Under Ge Roorkee
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | M&L for brick work in CM 1:6 using Sub class ‘B’ Bricks straight or curved on plan exc 6 m mean radius complete all as specified and directed. |
| 3 | M&L for brick work in CM 1:4 using Sub class ‘B’ Bricks straight or curved on plan any radius in half brick complete all as specified and directed. |
| 4 | Demolition of reinforced concrete any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | M&L for precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in manhole covers including necessary form work and fixing in position in cement mortar (1:4) complete all as specified and directed. |
| 6 | M&L 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps,jambs, pillars, window-cills, cooking platforms over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding of edges where required complete all as specified and directed. |
| 7 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed . |
| 8 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed . |
| 9 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed . |
| 10 | Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required for exc. half brick but not exc one brick complete all as specified and directed . |
| 11 | M&L MS Frame work as in door chowkhat with angle iron welded together ends of angle shouldered and fixed to opening and welding mild steel butt hinges, fixing of chowkhat (Butt hinges paid separately) complete all as specified and directed |
| 12 | S&F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides including fixing of rubber door cills, complete all as specified and directed. |
| 13 | S&F 30 mm thick 2nd class HW glazed skeleton shutter divided into square with plain chamfered or rounded without sash bars open rebated and prepared to receive glass/gauge etc with plain chamfered rounded fitted with cut and mitred beads size of members of window, ventilator shutters, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (a) and fitted to chowkhat complete all as specified and directed. |
| 14 | M&L powder coated aluminium frame for doors, windows, ventilators, partition walls etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 15 | S&F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 16 | S&F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed. |
| 17 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing new glazing pins / spring clips complete all as specified and directed. |
| 18 | Supply 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with rubber packing in square not exc. 0.5 sqm in each pane complete all as specified and directed. (rate of fixing including above item) |
| 19 | S&F powder coated aluminium grill of 50x50x5mm size (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 20 | S&F Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack/galvanised wire staple complete all as specified and directed. |
| 21 | M&L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 22 | S&F in repairs galvanised MS, wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack/galvanised wire staple complete all as specified and directed. |
| 23 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 24 | S&F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed. |
| 25 | S&F 150 mm size stainless steel handle, complete all as specified and directed. |
| 26 | S&F stainless steel barrel tower bolt 200 mm long, extruded section complete all as specified and directed. |
| 27 | S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed |
| 28 | S&F 250mm long, stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed. |
| 29 | Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness (below or above ground level) including removal of rubbish out side complex (MOD land), complete all as specified and directed. |
| 30 | M&L for 75mm thick PCC (1:3:6) type C-1 (using 20 mm graded aggregate) as in plinth protection, floor etc, laid in panels not exc 1.80 sqm each and filled with mastic fillig of bituman and sand all specified,finished even and smooth without using extra cement complete all as specified and directed. |
| 31 | M&L for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded aggregate) as in sub base of floors complete all as specified and directed . |
| 32 | M&L 25mm thick Cement concrete type B-0, (1:2:4) (12.5mm graded aggregate) as in sub floor and levelling coarse etc complete all as specified and directed. |
| 33 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded aggregate) as in coping/kerbs/stops rounded or chamfered on edges etc complete all as specified and directed . |
| 34 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 35 | M&L vitrified Ceramic Light shade tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 36 | -Ditto- but as in skirting over 15mm thick rendering in CM (1:6), complete all as specified and directed. |
| 37 | M&L for mirror polishing on marble/granite/Kota stone/stone work where ever required to give high gloss finish complete all as specified and directed. |
| 38 | M&L for Machine cut kota stone slab flooring 18-20mm thick with and including 100mm wide 16 to 18mm thick white marble border, laid over and including 15mm thick screed bed in cement mortar (1:6), set in neat grey cement slurry and jointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing with mirror finish complete all as specified and directed. |
| 39 | M&L for Machine cut kota stone slab 18-20mm thick in vertical surfaces such as skirting, laid over and including 10mm thick screed bed/backing in cement mortar (1:4), set in neat grey cement slurry and jointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing with mirror finish complete all as specified and directed. |
| 40 | M&L for glazed ceramic colour joint free tiles in vertical surface size 450X 350X7 mm/ 450x 300 x7mm/ 600x300mmx7mm thick as required set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 41 | M&L for Non skid Ceramic tiles 8 to 10 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 42 | M&L 16-18mm thick udaipur green (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding of edges where required all as specified and directed. |
| 43 | Taking down cement plaster (including tiles, if necessary) of any description on Brick walls including racking out Joints, hacking for key scrubbing down with water etc. |
| 44 | M&L for rendering 15 mm Thick in CM (1:6) on Brick surfaces, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 45 | M&L for rendering 15 mm Thick in CM (1:4) on Brick surfaces, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 46 | M&L for complete removal of existing treatment on surfaces of walls by scrapping down with mechanical grinder on old walls as per the specification of manufacturers instructions of paints/OBD complete all as specified and directed. |
| 47 | M&L preparation of newly plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm complete all as specified and directed. |
| 48 | M&L preparation of newly plastered surfaces of walls applying with 2 coat of oil bound distemper over a coat of 1mm thick putty on wall, complete all as specified and directed. |
| 49 | M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 50 | Dismantling timber scantlings 40 sq cm and over in section, in any position, framed work complete all as specified and directed |
| 51 | M&L for rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde E-250) complete all as specified and directed. |
| 52 | M&L MS framed work such as grills, gratings, hold fast etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bar, barred iron door, ladders, framed balusters, walk way, railings frame work of water tank and similar work confirming to Fe 290 Gde E165 complete all as specified and directed. |
| 53 | M&L preparation new steel surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 54 | Taking down asbestos (corrugated, semi-corrugated etc) sheets in roof covering complete all as specified and directed |
| 55 | S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ-150 of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 56 | S&F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick AZ-150 of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 57 | Taking down wall/ceiling boards asbestos/plywood of any thickness including cover fillets and supporting frame of any description complete all as specified and directed |
| 58 | S&F Designer ceiling board 595x595x4mm thick with GI framed work of size main 'T' 24x38.5mm and cross T of size 24X28.5mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24x24x0.4mm covered with powder coated sheet 0.25mm thick for ceiling, suspended with 3mm dia GI wire and up to 2 mtr long complete including plugging in brick walls with steel rawl plugs @ 600mm C/C complete all as specified and directed. |
| 59 | S&F 25 mm dia steel complete fancy type CP curtain rod with and including steel type brackets, stops, of suitable size & side caps etc complete all as specified and directed Make: Locally available Ist class quality duly approved by Engr-in-Charge and GE. |
| 60 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 61 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 62 | S&F 15mm bore GI steel tubing medium grade with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases and filling with CM (1:3) if necessary complete all as specified and directed. |
| 63 | S&F 20mm bore GI steel tubing medium grade with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases and filling with CM (1:3) complete all as specified and directed. |
| 64 | S&F vitreous china squatting pan (Orissa pattern) long pan including connection to trap, and to flushing pipe, anti-syphonage pipe etc incl making good to floor fixed in repair size 580x440mm white glazed with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 65 | Supply PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float ,handle and PVC. 32 mm dia flush pipe including brackets of 10 Ltr capacity complete all as specified and directed |
| 66 | S&F in repair vitreous china counter wash basin, white, Oval type, size 550x400mm, excluding taps, chain and plug and porcelain stopper but including waste coupling, exclusive of fixing of supply and waste pipe fixing complete all as specified and directed. |
| 67 | S&F in repairs 15mm dia bore brass CP mixer (Central hole basin mixer with 450mm long braided hoses) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 68 | S&F in repair for Angle cock, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed suitable for 15mm bore pipe complete all as specified and directed. |
| 69 | S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed |
| 70 | S&F in repair PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed. |
| 71 | S&F in repair looking mirror 600x450x5mm thick with aluminium channel frame, selected quality mounted on 6 mm thick commercial ply wood back and fixed with chromium plated brass screws and cup washers complete all as specified and directed |
| 72 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 73 | S&F in repair chromium plated fancy type 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed |
| 74 | S&F in repairs towel rail 600 mm long 20 mm dia Brass chromium plated fixed to wall D type with CP steel screws etc, complete all as specified and directed. |
| 75 | S&F in repairs 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 76 | S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 77 | S&F in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 78 | S&F in repairs 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 79 | S&F in repairs 75mm PVC (SWR) floor trap, plain with grating cover including jointing with solvent cement complete all as specified and directed. |
| 80 | S&F in repairs 75mm PVC (SWR) multi floor trap, plain with grating cover including jointing with solvent cement complete all as specified and directed. |
| 81 | Dismantling water tanks of 500 Ltr capacity and removing to store complete all as specified and directed. |
| 82 | M&L 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve (Ball valve make:- Prayag) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 83 | S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 84 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc.n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed |
| 85 | M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation of manholes, filling and mass concrete etc complete all as specified and directed |
| 86 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregrate) as in bed to 150mm internal dia RCC/SGSW drain pipes including packing under and haunching against sides of pipes after they are laid and tested complete all as specified and directed. |
| 87 | M&L for brick work with old size sub class ‘B’ bricks in cement mortar (1:4), straight or curved on plan exc 6m mean radius built complete all as specified and directed |
| 88 | M&L for rendering 15mm thick in cement mortar (1:3) mixed with water proofing liquid on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 89 | M&L for 150mm internal dia of pipe salt glazed stone ware drain pipes, and jointed in cement mortar (1:1) complete all as specified and directed. |
| 90 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in cills, coping, bed plates, bed blocks for hold fasts, apex stones and the like with plain fair faces including weathering, slightly rounded or chamfered angles and throating and necessary form work complete all as specified and directed. |
| 91 | M&L for precast reinforced cement concrete type B-1 (1:2:4) in landings, cover slabs for manholes, kitchen platform etc and similar articles with plain faces, with plain fair faces, including chamfers, weathering, throating etc and setting in mortar complete with joints to match set in CM 1:6 complete all as specified and directed. |
| 92 | Returning filling in with excavated soil including spreading, leveling, watering & well ramming in layers not exc 25 cm thick complete all as specified and directed. |
| 93 | Removing excavated surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 94 | Supply only WPC complete all as specified and directed. |
| 95 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 M-35 Grade with grey cement and pigment, complete all as specified and directed |
| 96 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 M-35 Grade with grey cement and no pigment, complete all as specified and directed |
| 97 | Supply and laying sand (25 mm thickness) for cushioning to interlocking paver block complete all as specified and directed. |
| 98 | Taking down any type point wiring (light, fan, socket or power) complete, incl fixtures and fittings like swithes, ceiling rose, pendant, regulator, sockets, light fitting (Mirror light, Bulk head, LED Panel 2''x2'', security light, wall fitting, down light, Flood light, Post top lantern) etc complete all as specified and directed. |
| 99 | M&L for Point wiring including with 1.5 Sqmm FRLS-H insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS-H insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit and its all accessories/junction boxes/inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG/with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass screws for mounting switches, sockets, fan regulator, etc/modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for the following points:-(a) One light point or one fan point controlled by one switch |
| 100 | -Ditto- all as per item No 99 here-in-before but One 6A socket point controlled by one switch on independent board |
| 101 | -Ditto- all as per item No 99 here-in-before but One 6A socket point controlled by one switch on same board |
| 102 | -Ditto- all as per item No 99 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 103 | M&L in repair for sub main wiring 2 runs x 4 sqmm (Ph & N) + 1run x 4 sqmm (earth wire) with FRLS-H insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc complete all as specified and directed. (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length). |
| 104 | Ditto all above but of size 2runs x 6 sqmm (Ph & N) + 1run x 6 sqmm |
| 105 | S&F switch piano flush type 6 Amps, one way, 240V, 50Hz, complete all as specified and directed |
| 106 | S&F socket 6 Amps, 2-in-1 flush type universal 240V, 50Hz, complete all as specified and directed. |
| 107 | S&F switch piano flush type 16 Amps, one way, 240V, 50Hz, complete all as specified and directed. |
| 108 | S&F socket 16A & 6A, 2-in-1 flush type universal 240V, 50Hz, complete all as specified and directed |
| 109 | S&F electronic socket type fan regulator rotary type in 5 steps, 240V, 50Hz , complete all as specified and directed. |
| 110 | S&F ceiling rose in poly carbonate 3 terminal brass, flush type 6 Amps, 220 volts AC, ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed. |
| 111 | S&F in replacement of Lamp holder, angle type with metal ring, PVC/Polycarbonate body with back plate, complete all as specified and directed. |
| 112 | S&F in repair Ceiling fan complete with three blades down rod, accessories 230 V, 1200mm sweep, BEE 5 star white/ warm white with squirrel cage induction motor complete all as specified and directedNote: Old Ceiling fan to be deposited in MES store Yard |
| 113 | S&F 20/22 Watt of T-8, LED batten type body pre-wired with bipin holders, connector block complete with all accessories including LED tube with Polycorbonate body, full white and connecting up with PVC insulated and PVC sheathed twisted three core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and directed. |
| 114 | S&F LED 35 watt Building security light fitting mounting type made out of one piece in pressure die-cast aluminium housing with high efficient LED as lighting source and PC Cover separate compartment for driver, including bracket clamp and fixing accessories complete with electronic driver and all accessories. The fitting shall IP 65/66 protection, duly prewired complete all as specified and directed. |
| 115 | S&F in replacement of MCCB/MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar of capacity 200 amp, neutral link and earth link complete including cutting the wall surfaces for mounting of DB and making good with cement plaster, to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. |
| 116 | S&F MCB distribution board, SPN, 4 way, in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. Note: MCBs shall be measured and paid separately. |
| 117 | S&F MCB distribution board, SPN, 8 way, in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. Note: MCBs shall be measured and paid separately. |
| 118 | S&F in replacement of MCB SP 06 to 32A, 10 KA, single Pole, 'C curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete with all connection all as specified and directed. |
| 119 | S&F in replacement of MCB SPN 6-32 Amp, 'C curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed. |
| 120 | S&F in replacement of MCB TPN 63A, 415 V including taking down existing unserviceable MCB of any description complete all as specified and directed. |
| 121 | M&L for earthing complete with galvanised steel earth plate electrode 600×600×6 mm thick buried directly in ground (earth pit not less than 2.25 mtr depth below ground level at any type of strata) with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected by 4 mm GI wire as earth lead by means of brass nuts and bolts, thimbles, check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20 mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300 mm×300 mm, 15 mm thick plaster in CM 1:4, funnel with wire mesh, RCC pit cover of 320×320×80 mm size (1:2:4) Type B1 using 20 mm graded stone aggregate reinforced with XPM all as shown in electrical plate No. 3 of MES SSR Part-I (2009) and specified including provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade ‘G’ pipe protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing wire to panel including testing on completion complete all as specified and directed.Note:(i) RCC pit cover shall be precast of RCC (1:2:4) type B1, 80 mm thick reinforced with XPM weighing not less than 4 kg/sqm in lieu of CI cover. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender