Tender For Augmentation Of Water Distribution Pipeline For Stn Hq Ranchi, Hq Cwe Ranchi, Asc Bn & Mes Staff Md Accn At Dipatoli Mil Stn Under Ge Dipatoli
Tender Value
43 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
3 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augmentation Of Water Distribution Pipeline For Stn Hq Ranchi, Hq Cwe Ranchi, Asc Bn & Mes Staff Md Accn At Dipatoli Mil Stn Under Ge Dipatoli
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 meter in depth for laying/ taking out of pipe in soft/loose soil, complete all as specified and directed. |
| 2 | Returning/ refilling in trenches including spreading levelling, watering and well ramming in layer not exceeding 25 cm thick, complete all as directed. |
| 3 | Removal of excavated surplus soil not exceeding 50 meter and depositing where directed at level not exceeding 1.5 metre above the starting point, complete all as directed. |
| 4 | Cutting existing CI/DI/MS water mains in position for insertion of tee, branch line etc to new water connection of size 200 mm bore complete all as directed. |
| 5 | All as per item No 4 here-in-before but of size 150 mm bore complete all as directed. |
| 6 | All as per item No 4 here-in-before but of size 100 mm bore complete all as directed. |
| 7 | Taking up CI/DI/MS water mains including all fittings with spigot and socket ends and lead joint including burning out lead joint and recovering lead of CI pipe of size 200 mm dia bore complete all as directed. |
| 8 | All as per item No 7 here-in-before but of size 150 mm bore complete all as directed. |
| 9 | All as per item No 7 here-in-before but of size 100 mm bore complete all as directed. |
| 10 | Refixing of CI/DI/MS pipes with socket and spigot end in trenches with necessary fittings in any length including cleaning of size 200 mm dia bore complete all as specified and directed (Excavation and earth work shall be measured & paid separately) |
| 11 | All as per item No 10 here-in-before but of size 150 mm bore complete all as specified and directed. |
| 12 | All as per item no 10 here-in-before but of size 100 mm bore complete all as specified and directed. |
| 13 | Supply, laying and jointing of DI pressure pipes with spigot and socket lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and mettalic zinc/epoxy coating on outer side, suitable for push on joint (rubber gasket joint) including rubber gasket, in any length laid in trenches/ over masonry pillar and connection to old or new position of Class \\"K-7\\" of size 200 mm bore complete all as specified and as directed. |
| 14 | All as per item No 13 here-in-before but of size 150 mm bore complete all as specified and directed. |
| 15 | All as per item No 13 here-in-before but of size 100 mm bore complete all as specified and directed. |
| 16 | Material and labour for run lead joints of CI pipes of size 200 mm bore complete all as specified and directed. (Excavation and earth work will be measured & paid separately) |
| 17 | All as per item No 16 here-in-before but of size 150 mm bore complete all as specified and directed. |
| 18 | All as per item No 16 here-in-before but of size 100 mm bore complete all as specified and directed. |
| 19 | Material and labour for Rubber gasket (Tyton) joint of size 200 mm bore complete all as specified and directed. (Excavation and earth work will be measured & paid separately) |
| 20 | All as per item No 19 here-in-before but of size 150 mm bore complete all as specified and directed. |
| 21 | All as per item No 19 here-in-before but of size 100 mm bore complete all as specified and directed. |
| 22 | Supply and fixing cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS 14846-2000, class PN 1.0 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size & Nos, of size 200 mm dia complete all as specified and as directed |
| 23 | All as per item No 22 here-in-before but of size 150 mm bore complete all as specified and directed. |
| 24 | All as per item no 22 here-in-before but of size 100 mm bore complete all as specified and directed. |
| 25 | Supply and fixing in repair CI body and brass gate heavy duty non return valve (NRV) with by-pass arrangement, IS-5312, ISI marked both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & nos complete of size 200 mm bore complete all as specified and directed |
| 26 | All as per item No 25 here-in-before but of size 150 mm bore complete all as specified and directed. |
| 27 | All as per item No 25 here-in-before but of size 100 mm bore complete all as specified and directed. |
| 28 | Material and labour for construction of brick masonry valve pit of size 900X900X900 mm (internal dimensions), one brick thick wall in cement mortar 1:4 on 100 mm thick PCC 1:4:8 (40 mm graded stone aggregate) in foundation, rendering 15 mm thick in cm 1:4 internally an extrernally upto 150 mm below GL, providing 3.0 mm thick MS sheet valve pit cover cover, welded with 40X5 mm flat iron frame alround incl provn of hinges, handle and locking arrangements and 40X40X6 mm angle iron frame fixed on top of vavle pit by means of holdfast 150 mm ling embedded in PCC 1:2:4 (20 mm graded stone aggregate) block of size 230X200X100 mm, applying two coats of anti-corrosive paint over a coat of red oxide ore zinc chrome primer after prep of all exposed to steel surfaces incl necy excavation & earth work in soil complete all as specified and directed. |
| 29 | Material and labour for construction of brick masonry valve pit of size 1200X1200X1200 mm (internal dimensions) one brick thick wall in cement mortar 1:4 on 100 mm thick PCC 1:4:8 (40 mm graded graded aggregate) in foundation, rendering 15 mm thick in cm 1:4 internally an extrernally upto 150 mm below GL, providing 3.0 mm thick MS sheet valve pit cover cover, welded with 40X5 mm flat iron frame alround incl provn of hinges, handle and locking arrangements and 40X40X6 mm angle iron frame fixed on top of vavle pit by means of holdfast 150 mm ling embedded in PCC 1:2:4 (20 mm graded stone aggregate) block of size 230X200X100 mm, applying two coats of anti-corrosive paint over a coat of red oxide zinc chrome primer after prep of all exposed to steel surfaces incl necy excavation & earth work in soil complete all as specified and directed. |
| 30 | Material and labour for DI fittings as per IS-9525 for spigot socket pipe such as bends (any type, radius and angle) tappers any type (straight, bend increasing , decreasing or double socket etc) Tee pieces single branch, \\"Y\\" junction, double branch, cross (all socket or socket and plugs) or in form of mechanical joints in any size incl cutting and jointing old/new positions for bends, tees, all types of flanges, socket and spigot, collars caps etc complete all as specified and directed. |
| 31 | Material and Labour for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for construction for thrust blocks to the pipe at corners and bends etc complete all as specified and directed. S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender