Tender For Provn Of Foot Path From Gate No-03 Spector Gallery At Cpg, Provn Of Wiring Of Echs Bhawan (Bldg No P-19), Provn Of Rain Protection Shed, Modular Kitchen, View Cutter And Other Misc Work At 9 Mandir Marg And Repair To Floor Tiles In Veranda
Tender Value
39.09 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
13 days left
EMD
78200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Foot Path From Gate No-03 Spector Gallery At Cpg, Provn Of Wiring Of Echs Bhawan (Bldg No P-19), Provn Of Rain Protection Shed, Modular Kitchen, View Cutter And Other Misc Work At 9 Mandir Marg And Repair To Floor Tiles In Verandah Of Bldg No T-78 At Rpso Complex Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil, complete all as specified and as directed. |
| 2 | Excavation in trenches not exc 1.5m wide and not exc 1.5m depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out in soft/ loose soil, complete all as specified and as directed. |
| 3 | M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in foundation, filling in mass concrete, complete all as specified and as directed. |
| 4 | M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves, complete all as specified and as directed. |
| 5 | M&L for sand filling under floors or in foundations including watering and consolidation |
| 6 | M&L for 75mm thick plain cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 7 | Machine pressed rubber moulded glossy finished coloured (2 colour combination) precast chequered cement concrete tiles gray cement and pigment of size 30cm x 30cm and 25mm thick, laid over and including 15mm thick screed bed in CM 1:6 set, jointed and pointed in neat cement slurry in floors, complete all as specified and as directed. |
| 8 | M&L for applying two coats of synthetic enamel paint over a coat of primer, any tint on new brick, kerb stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth including preparation of new surfaces, complete all as specified and as directed. |
| 9 | Returning, filling including spreading, levelling, watering and well reamming in layers not exc 25 cm in soil, complete all as specified and as directed. |
| 10 | Removal excavated material exc. 50m but not exc 100m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed. |
| 11 | M&L for 100mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in surface chanel incl necessary form work finish even and smooth with using extra cement, complete all as specified and as directed. |
| 12 | S&F 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed. |
| 13 | M&L Excavation in post holes (or similar holes) in hard/dense soil each not exc 0.5 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25cm, watering and removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and directed. |
| 14 | M&L for PCC (1:3:6) type C2 using 40mm graded stone agg as in post holes, complete all as specified and as directed. |
| 15 | S&F steel work in tubular trusses, purlins and rafter including special shaped washer ,bolts and plates etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified |
| 16 | M&L for preparation of new steel surface of any description not exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 17 | S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 18 | M&L Excavating over areas, not exc 1.5 m deep and gettting out in any type of soil, complete all as specified and as directed. |
| 19 | M&L for stone boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceedind 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed. |
| 20 | M&L 75mm thick PCC 1:4:8, type D-2 using 40mm graded stone aggregates as in sub bases of floors and pavings. |
| 21 | M&L machine pressed precast concrete inter locking paver block with grey cement and pigment (Reflective type)in any shape and size confirming to IS-15658-2006 of 80 mm thickness M-40 grade complete all as specified. |
| 22 | M & L with fabrication & fixing to horizontal & vertical shelves/ partations /sides/ top/ bottom/ etc for Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR boards depths 45cm, to 70 cms with white laminated colour on inside and all the outer faces to be covered with glossy laminate Color as approved by GE and including paste to all exposed edge by edge Banding Tape and auto soft closing hinges including provision of cabinet for keeping baskets/ drawers etc and includingfixing G/J Profile handle jandels all as specified and directed. (Design and pattern as approved by GE). ( Front Face would be measured for payment (Make :Action tesa or equivalent) |
| 23 | S&F Stainless steel basket (Perforated Cutlery Basket SS) of size 445mm x 485mm x 150mm made with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 3575 or equivalent in IPSA/Hettich as approved by Engr-in-Charge). |
| 24 | S & F for Stainless steel thali/plate basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing and including telescopic basket over telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 3441or equivalent in IPSA/ Hettich as approved by Engr-in-Charge). |
| 25 | M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, floors, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 20 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed. |
| 26 | Dismantling stone slabs and floor/ wall tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed. |
| 27 | M&L for Vitrified Ceramic tiles 9-10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM 1:4, complete all as specified and as directed. |
| 28 | M&L for Vitrified Ceramic tiles 9-10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, as in vertical surface over and including 10mm thick rendering finished even and fair using CM 1:4, complete all as specified and as directed. |
| 29 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement mortar including cleaning the surface with wire brush, complete all as specified and as directed. |
| 30 | M&L for rendering 15mm thick using cement mortar 1:4, finished even and smooth without using extra cement on fair faces of brick work or concrete surface and applying 2mm thick self curing ready mix mortar on walls, complete all as specified and directed. |
| 31 | M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Deot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface. |
| 32 | M&L for one coat of synthetic enamel paint over a coat of primer incl prepration of old/ previously treated steel surface, complete all as specified and as directed. |
| 33 | Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and multistranded copper conductor cable ISI marked either in existing or in PVC concealed conduit ISI marked of size 20 mm min dia/ and PVC conduit fittings such as tees, bends, elbow, reducers including cutting & chasing and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size with modular sheet (top cover) for fixing modular switches/sockets etc for controlled by complete all as directed. |
| 34 | Desription all as per srl item no. 33.00 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for one socket outet point 5 amps on the same board. |
| 35 | Desription all as per srl item no. 33.00 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for one socket outet point 5 amps on the independent board. |
| 36 | Desription all as per srl item no. 33.00 here-in-before but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for 15 Amp power point. |
| 37 | S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed. |
| 38 | S&F in repair modular socket outlet 6 amps 5 pin 2 module all as directed. |
| 39 | S&F modular Socket, 16 Amp, multipurpose shutter type, 02 module size complete all as directed. |
| 40 | S & F Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed. |
| 41 | Material and labour submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm as earth wire in and including PVC conduit of size 25 mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc complete all as directed. |
| 42 | Material and labour submain wiring complete with 2 x 16 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 16 sqmm as earth wire in existing conduit and including PVC conduit of size 25 mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc complete all as directed. |
| 43 | S&F rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete for surface mounted / concealed including cutting chases in wall and making good the surface all as specified and and as directed. |
| 44 | Supply and fixing metal enclosure AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed. |
| 45 | S&F MCB DB conforming to IP 43 - IK 09 with double door, SPN 16 way 230 Volt double door complete with din rail, Neutral and Earthing bar connection complete and making good the disturbed surfaces. |
| 46 | Supply and fixing MCB B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed. |
| 47 | Supply and fixing MCCB incommer Distribution Board (Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections, complete all as directed. |
| 48 | S & F MCCB, 415 volts, three pole of cap 125 Amps, 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed. |
| 49 | Supply and fixing MCB 'C' curve, 10 kA, 40 Amp, SPN with over load and short circuit protection complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender