Tender For Construction Of Chimney At Mallasamudram Cremitorium In Mallasamudram Town Panchayat.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Aug 2026
11 days left
EMD
19000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Namakkal → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Chimney At Mallasamudram Cremitorium In Mallasamudram Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls |
| 2 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B |
| 3 | Plain Cement Concrete 1:4:8 Mix (one part cement, Four part sand and Eight part of aggrigate) using 40mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 4 | Centering for sides and soffits of R.C.C Slab surfaces such as beams, lintels roof slabs and sunshades including cost and conveyance of all materials to site and labour charges for centering and structing upto 3.00 m height etc. complete. Complying with std specifications Side Centering |
| 5 | Supplying fabricating and placing in position of steel rods using TMT. or Ribbed Tor Steel including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications. |
| 6 | Vibrated Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. |
| 7 | Plain Cement Concrete 1:2:4 Mix (one part cement, Two part Msand and four part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications. |
| 8 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\\" X 43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 9 | Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) |
| 10 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 11 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint |
| 12 | Asper TNPCB norms we design, Fabricate and supply a chimney of 30m height. The chimney shall be fabricated out of MS Material of thickness sheets 8mm,6mm and 5mm variying from bottom to top with a bottom dia. Shall not be less than 1000mm. Design shall conform to IS 6533 NORM and chimney shall be provided with acessories such as Steel Ropes, Aviation Light, Sampling nozzle, lightning arrestor, Drain plug,bottom Door etc |
| 13 | Supply and erect double throat SS venture and wet scrubbing arrangement after the furnace, capable of removing fine dust particals through wet washing, The venture subscriber shall be connected to a wash column for gas wash water separation. The venture scrubber shall be SS of 2.50mm thick Plate suitably manufactured snd tested at the fabrication shop 6 Nos of water nozzle, ineer side filter ceramil layer centifugal pump of suitable to circulate to mild alkaline water through the venture scrubber at a rate of not less than 2 litres with a discharge pressure head of (3KG/CM2/Min) in the venture scrubber. |
| 14 | Supply and erect 5HP id Flower-S.S to Excaust the flue gas to the chimney after the flue cooled and cleaned in the S .S Venture scrubber. Blower bed 3x3 with material and Labour charges etc |
| 15 | Supply and erect MS Pipe line Furnace Trench line to Scrubber and cleaned flue gas from the SS scrubber to the blower & blower to the chimney. and Labour charges etc |
| 16 | Trolly serviced and changed trolly hand break and all service |
| 17 | Erection of Chimney Labour charges etc Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender