Tender For Providing New Borewell With Mini Power Pump At Ward No.12 Vayakkaddu In Arasiramani Town Panchayat
Tender Value
5 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
6 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing New Borewell With Mini Power Pump At Ward No.12 Vayakkaddu In Arasiramani Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Geophysical Investigation charges including preparation of geophysical report as per TWAD Board type circular including all cost of transportation and handling charges etc.,complete |
| 2 | Drilling of 150mm(6\\") dia Vertical clear bores in Hard rock in any habitation any where in Salem District to any required depth as directed b y the officers concerened including labour charges for inserting M.S/P.V.C Casing pipes to any reauired depth , assembilling in the drilled hole including welding joints if necessary . Grouting the cassing pipes including conducting proper yield test at final depath (by provinding 90 ' V' Notch fitted in a formed channel and the correct yield at the time of free flow in the channel while flushing the bore after completion of drilling process should be ascertained of and reported )including Bore cover transportation. crew and fuel charges for rigs and supporting Vechicles from one place to another etc Complete and as directed by officers Concerned. |
| 3 | Drilling of 150mm dia. bore wells in overburden soil including labour charges for insertion of casing pipes |
| 4 | 19m-150m chainage |
| 5 | 151m-180m and Above |
| 6 | 181m-210m and Above |
| 7 | Supply and delivery of 150mm OD 6KSC pvc casing pipe for bore well including cost ang convayance of material and labour charge etc complete. [CS- Casing Shallow Depth up to 80m |
| 8 | Supply and delivery of vertical wet type 5 HP (50 lpm x 175 m head) submersible pumpset with motor and confirming to IS 8034/2002 with ISI marking without D.O.L pannel board as per standard specification. The pump set should be supplied with 5M flat submersible motor etc.,complete. complying with std. specifications. |
| 9 | SUPPLYING OF Three phase PANEL BOARD-STAR DELTA WITH TWO LEVEL GUARD as per IS specification |
| 10 | Supply and delivery of 4.00sqmm flat type PVC insulated 3core copper cable confirming to IS694/1990 with ISI Marking suitable for submersible pump set etc complete. |
| 11 | Supplying and fixing in pisition of the following Pipe and Specials best approved quality conforming to ISS and providing leak proof joint with PVC adhesive etc., complete complying with standard specification. |
| 12 | 63mm HDPE Pipe |
| 13 | 40mm UPVC pipe |
| 14 | G.I Pipe 50mm |
| 15 | G.I Pipe 80mm |
| 16 | M.S Borewell Cover |
| 17 | Borewell Clamp set - 40mm |
| 18 | Earth work excavation for foundation in all soils and sub-soil to full depth as may be directed except in hard rock requiring blastering including shoring, timbering,strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in 15cm. Layers, well rammed and compacted and depositing the surplus earth in places shown by the departmental officers with initial leads and lifts etc. including leveling the site complete complying with standard specifications and as directed. |
| 19 | Towards cost of labour charges for laying, jointing and pasting in position including all other labour charges etc. complete |
| 20 | Towards Labour charges for refilling excavated earth for foundation sides and basement including all labour and all other charges etc., complete as per standard specification. (S.No. 85) |
| 21 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable withproper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 22 | 5.00 HP Submersible Pumpset |
| 23 | Supply and Fixing L.T. Cables 4 Core 1.1 Kv Grade Armoured Aluminium Conductor Cross Linked Poly Ethylene Insulated PVC Sheathed Cables Conforming To Is 7098 (Part I)/1988 And As Amended Thereafter With ISI Marking Inlouding All Cost Etc,. Compl |
| 24 | 6Sqmm |
| 25 | Supply and run of 4 x 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains |
| 26 | Construction of Pedestal for HDPE Tank with Earth Work for pedestal foundation of 0.15M Depth and PCC 1:4:8mix with 40mm HBG metal with 0.10M depth for pedestal Foundation. Brick Work in Cement Motor 1:5 using country bricks for super structure to a height 0.80Meter to the Entire area of the pedestal should be plastering in Cement Mortor 1:5 12mm thick. After Plastering surface should be paint with approved quality cement paint including cost and conveyance and all labour charges for mixing laying quring for standard specification. |
| 27 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., |
| 28 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m for fixing of meter board, switch board with MS door and lock and key arrangements including cost and construction of padestal for kiosk box and labour charges etc., Complete. |
| 29 | Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed by TWAD Board Officers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender