Tender For Providing New Borewell With Motor Near Ward No.13, Mettankadu Ganapathi Nagar And Ward No. 3, Amman Nagar Area In Pattanam Town Panchayat.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Aug 2026
4 days left
EMD
25000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Namakkal → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing New Borewell With Motor Near Ward No.13, Mettankadu Ganapathi Nagar And Ward No. 3, Amman Nagar Area In Pattanam Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Towards the labour charges for conducting Geological survey etc., including all tools and plants and all labour charges etc., omplete |
| 2 | Drilling of 150 mm Dia. Vertical clear bores in hard rock in anywhere in Namakkal district to any required depth as directed by the officers concerned including labour charges for inserting MS / PVC casing pipes to any required depth, assembling in the drilled hole including welding jointing if necessary, grouting the casing pipes including conducting proper yield test at final depth (by providing 90 0 V notch fitted in a formed channel and the correct yield at the time of free flow in the channel and the correct yield at the time of completion of drilling process should be ascertained of and reported ) and providing cap including transportion, crew and fuel charges for rigs and supporting vehicles from one place to another etc., complete and as directed by officers concerned. (A) Upto 150 Mtr below Ground Level |
| 3 | 151 Mtr to 180 Mtr |
| 4 | 181 Mtr to 210 Mtr |
| 5 | 211 Mtr to 270 Mtr |
| 6 | 271 Mtr to 300 Mtr |
| 7 | Supply and fixing of 150 mm dia. PVC casing pipe including loading unloading transporting and all labour charges etc., complete. |
| 8 | Supply and delivery of 10 HP 3 phase submercible motor suitable for 150 mm dia. Borewell with 100 lpm X 250 M head including cost and conveyance to site loading unloading and transporting and all labour charges etc., complete. |
| 9 | Supply and delivery of Star Delta panel board suitable for 10 HP submercible motor including cost and conveyance to site etc., |
| 10 | Supply and delivery of 4 sq.mm 3 core flat type submercible copper cable as per Standard specification including cost and conveyance to site etc., complete. |
| 11 | Supply and delivery of 50mm dia UPVC Column pipe including cost and conveyance to site loading and unloading etc., complete. |
| 12 | Supply and delivery of 2000 Litre capacity HDPE Tank including cost and conveyance to site loading and unloading etc., complete. |
| 13 | Supplying and fixing of MS box for fixing the meter,panel board and main switch to a size of 75X35X60cm over the ex.masonry work with locking arrangements including cost and conveyance to site and all labour charges etc. |
| 14 | Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V gradeon 7 / 20 GI bearer wire for service connection mains (SD67) |
| 15 | Supply and run of 4 of 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD72) |
| 16 | Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit(500V) 32A neutral link and earth link (1\\" x 1/8\\" copper flat) on TW plank of size 600mm x 450mm x 19mm withsupporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank onwall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit58 (SD 127) |
| 17 | Supply and fixing of 32A aerial fuse unit (500A) on suitable 100 x 100mm TW concealed box with hylem sheet onthe tapping pole with necessary clampsSD128 |
| 18 | Supply and fixing of 16A DP switch of 500V with matal clad with fuse and neutral (side handle) on suitable TW boardwith earth connection only.(SD142) |
| 19 | Labour charges for errection of Submercible pumpset in borewell including fixing and jointing submercible cable with proper clamps upto the starter to required depth and also fixing of raiser pipes to the required depth, valves, erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter , voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 20 | Earth Work excavated and depositing on bank with initial lead and lift in hard stiff clay black cotton, hard red earth, shales, murram, ordinary gravel, stoney earth and earth mixed with small size boulders for foundation SS20B |
| 21 | C.C.1:4:8 mix using 40 mm ISS HBG metal including cost and conveyance to site laying finishing curing etc complete |
| 22 | Brick work in C.M.1:5,mix using best country bricks including cost and conveyance to site finishing,curing etc., complete. |
| 23 | Plastering with C.M 1:5,12 mm thick including cost and conveyance to site finishing curing etc., complete. |
| 24 | Painting two coats with approved cement paint over ane coat of priming coat over cement plastered exposed surface of the Reservoir including cleaning, preparing the surface and curing etc., complete and as directed by Department Officers |
| 25 | Supply and delivery of 90 mm dia.6 Kgf/cm2 PVC pipe including transporting loaing and unloading etc., complete. |
| 26 | Labour charges for laying and jointing the PVC and GI Pipes with specials true to the proper grade and alignment and testing the same with water etc., complete. (A) 90mm PVC Pipe line |
| 27 | Refilling the excavated earth after laying the pipes in layers of not more than 15cm thick well rammed watered and consolidated etc., complete. |
| 28 | 80 mm GM Gate valve Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender