Tender for Tender for Work No. 07 Construction Work Of High Mast Light, Swing, One Piece Summersail And Footpath For Public Convenience In Madhuvan Enclave Park Located In Ward No. 46.
Tender Value
20.31 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
6 days left
EMD
1.02 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work No. 07 Construction Work Of High Mast Light, Swing, One Piece Summersail And Footpath For Public Convenience In Madhuvan Enclave Park Located In Ward No. 46.
BOQ
| Sl. No. | Item Description |
| 1 | Banking excavated earth by mechanical / manual means in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and roiling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc, lead upto 50 m and for all lift: All kinds of soil dsr 2023 i.no 2.3.1 |
| 2 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) dsr i.no 4.1.3 |
| 3 | Cartage of dismentled material 3km distance UPPWDSOR 2023-24 S.NO 3 page .no. 16A |
| 4 | Suppy and instalation of See-Saw two seater item Code No SS-01 (make by royal Amusements) or equivalent quality as directed by E/I. MR |
| 5 | Suppy and instalation of designer straight slidder (8 feet) item Code No SD-06D (make by royal Amusements) or equivalent quality as directed by E/I .MR |
| 6 | Suppy and instalation of Swing 2 seater item Code No SW-02 (make by royal Amusements) or equivalent quality as directed by E/I . MR |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). dsr 2023 i.no.4.1.2 |
| 8 | Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS-875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. PWD SOR 2018 Si. No. 651 |
| 9 | Supply and laying of 16 sqmm 4 core aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD SOR -18 S.I. No. 501 |
| 10 | Supply and fixing of 4 sqmm 2 core flat twin \\"AL\\" cable Mtr complete with labour T&P an dall taxes as per direction by E/I. |
| 11 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the E/lc 25sqm. PWD SOR -18 S.I. No. 501 |
| 12 | Supply and burring of safe earthing electrode T-19 Zn-Zinc coated, length up to 2000 mm., outer pipe 48.4 mm. x 3.2 mm., inner pipe 26.9mm.x2.6 mm., terminal dia. 12 mm., coating 80-100 micron filled with crystallinc conductive mixture (CCM) having anti corrosive & conductive properly with 50 kgs. activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing (From electrode terminal to switch board, cost of 25x3 G.I. strip will be extra). Make: As approved in U.P. P.W.D. & C.P.R.I. certified. PWD SOR -18 S.I. No. 725-B |
| 13 | Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PWD SOR -18 S.I. No. 717 |
| 14 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPΝ, complete in all respect.25A SPN 807 (B) |
| 15 | Supply and fixing of factory wired integral LED flood light luminaries with die cast aluminium housing built with dirver set suitable for 140-150 watt. Confirming to IP-66 protection complete in all repect. PWD SOR -18 S.I. No. 1454 CAT-AAA |
| 16 | Providing & Fixing of Hand Boring with 150 mm Q Buro hole by casing pipe method in ordinary soil including correction ….. Levelling of side complete.. |
| 17 | Supply of 110 mm Q 6 kg / sqm I.S.I. mark P.V.C.pipe including all taxes cartage up to side including cord cape. |
| 18 | Providing & Laying of Column Pipe 50 mm dia |
| 19 | Supply of solvent |
| 20 | Supply of Filter Cloth |
| 21 | Supply of 1.5 H.P.I.S.I. Marka K.S.B.make or equivalent Submersible Motor Pump Complete. |
| 22 | Supply of 3 Phase 2.5 mm I.S.I. Marka Flate cable |
| 23 | Supply of Starter with overload relay I.S.I.mark. |
| 24 | Supply of 50 mm dia Iron clamp |
| 25 | Supply of 2 \\" Nipple 50 mm dia. |
| 26 | Supply of 2 \\" Albow Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender