Tender For Withdrawing And Lowering Of Submersible Pump Motor Set At River Ajoy At Bhaburia Head Works And Some Other Allied Works Under Gourbazar-Ichapur & Jamgara-Jagannathpur Water Supply Scheme.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Aug 2026
4 days left
EMD
12000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Withdrawing And Lowering Of Submersible Pump Motor Set At River Ajoy At Bhaburia Head Works And Some Other Allied Works Under Gourbazar-Ichapur & Jamgara-Jagannathpur Water Supply Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | Lowlift rectification portion:- |
| 2 | Making a bamboo trap (Just like tripod) approx height= 20 Mtr, for withdrawing of submersible pump-motor set, making this arrangement for sand errosion from river bed due to this caused height of casing is increased, old river bed Tube Well along with Column pipe after disconnection of all pipe line and power line connection with the help of Derrick and Chain Pulley arrangement by engaging skilled technician as per direction of EIC.(For 7.5 HP S/M P/M Set) |
| 3 | Withdrawing of submersible pumping machineries from old river bed Tube Well along with Column pipe after disconnection of all pipe line and power line connection with the help of Derrick and Chain Pulley arrangement by engaging skilled technician as per direction of EIC.(For 7.5 HP S/M P/M Set) |
| 4 | Supply & delivery at site 3 Core X 4 Sqmm 1.1 KV Grade flat submersible copper conductor cable as per IS:694.(Make:-Gloster/Mescab/Polycab/Other approved make)(4 Nos RBTWs X 25 Mtr cable for Each RBTW) |
| 5 | Supply & delivery and storage at site 80 mm dia. 1.5 mtr length ERW M.S. column pipe having thickness 4.85 mm, (as per IS 1239 Part-I Heavy Type ) having 11 TPI thread at both end with one heavy type socket and painted by 2 coats of anticorrosive syntietic paint as per Technical Specification.(For 4 Nos of RBTWs X 14 Nos pipe per T/W) |
| 6 | Supply & delivery at site of vertical submersible pumping machinery directly coupled with wet winding type suitable size submersible motor with following specification:-Capacity-33 m3/Hr. at a head of 35 mtrs., Motor submersible type 3 phase 50 Hz, ± 3% ,415 Volt ± 6%, 2900 RPM as per Technical Specification given.(Starting method:-DOL) (Test certificate and guarantee certificate is to be submitted at the time of delivery)( Others2 Nos Supplied departmentally) |
| 7 | Supply & delivery of 100 mm X 80 mm MS heavy type socket inside threaded. |
| 8 | Supply & delivery of 100 mm dia, 1 feet long heavy type short piece. |
| 9 | Supply of G.I. wire for cable binding. |
| 10 | Sand cutting and removing from the river bed Ajoy for withdrawing and laying of cable line up to the depth of 1.5m from the river level as per direction of EIC.(150 mm length X 0.3 mtr depth X 0.3 mtr width X 5 Nos RBTW) |
| 11 | Laying of 3 Core X 16 mm² Al. Ar. Cable along the length of collecting line including fixing with supplied G.I. wire at a suitable interval so as to prevent sagging of cable complete as per direction of EIC.(150 Mtrs X 4 Nos RBTW+150 Mtr for old RBTW) |
| 12 | Filling the trenches with excavated sand by engaging manual labour as per direction. |
| 13 | Making straight through joint of 3 Core 16 mm2 and 3 Core X 4 sqmm Cu flat submersible cable by supplying ferule ans necessary socket all complete as per direction. |
| 14 | Making straight through joint in between 3 Core 16 mm2 and 3 Core X 4 sqmm Cu flat submersible/3 Core X 16 Sqmm Al Ar cable by supplying ferule ans necessary socket all complete as per direction.(For old 2 Nos RBTW rectification) |
| 15 | Making straight through joint of 3 Core X 16 mm2 Al Ar Cable with submersible cable by supplying Ferrule,rubber and other necessary materials to make the joint leak proof. |
| 16 | Installation of submersible pumping machinery along with 80 mm dia. M.S. column pipe part by part in the newly sunk tube wells with an arrangement of derrick, lifting tackles, tools and plants etc. on hire basis and binding the vertical submersible cable with the column pipes properly and fixing M.S. Top Cover on the tube wells with supplying necessary Clamps made of 65 mmX 12 mm thick flat as per reqd length, nuts, bolts, washers etc. all complete as per direction. |
| 17 | Lowering of Submersible pump Motor set along with 80 mm dia Column pipe part by part in the existing Tube Wells with an arrangement of Derrick and Chain Pulley arrangement, making Pipe line connection etc. all complete as per direction of EIC. (Submersible pump-motor supplied departmentally) |
| 18 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:-3 Core X 16 Sqmm. |
| 19 | Riverbed Lighting Portion:- |
| 20 | Dismantling and lowering of the outdoor lighting luminaries from the top of the pole as well as outside of pump house and OHR by using of scaffolding arrangement after disconnection of electrical connection etc as per direction. |
| 21 | Supply & delivery of 250 Watt, high-efficiency IP65 innovative LED floodlight with pressure die-cast aluminium housing and toughened glass in the front with unique flood optics to ensure uniform distribution and savings upto 50% as compared to conventional system.(Make:-Approved make) |
| 22 | Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. |
| 23 | Painting of Steel Tubular Pole of lengths and no. of coats of paint,as given below with ready mixed paint/primer of approved make,and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint-Above 9.0 mtr. long pole(i)1st coat of aluminium paint over 1 coat of RO priming.(ii)2nd coat of aluminium paint over 1st coat. |
| 24 | Dewatering Pump replacement portion(At pump house sump):- |
| 25 | Supply of 0.75 KW/1 HP dewatering submersible Pump-Motor set, Discharge-230 LPM,Head-10 mtr. inlet and outlet size-50 mm, Max solid handling-20 mm, motor-3 Phase,415 volt,50 Hz. (Make-Kirloskar, Model-750 CW) |
| 26 | Atfirst removing the existing damaged dewatering pump-motor set from the trench, then installed new and fixed in position by MS angle and connect all power line from starter feeder, laying of cable, making delivery line all works should be done by Expert Mechanic as per direction. |
| 27 | Add GST @ 18% |
| 28 | Add CESS @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender