Tender For Providing And Installation Of Submersible Pump-Motor Set In Newly Cwr At Gourandi Boosting Station Under Panuria-Itapara Water Supply Scheme.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Aug 2026
6 days left
EMD
18000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Installation Of Submersible Pump-Motor Set In Newly Cwr At Gourandi Boosting Station Under Panuria-Itapara Water Supply Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. |
| 2 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. |
| 3 | Earth work in excavation of Cable line trenches, in all sorts of soil including removing, spreading or stacking the spoils within a lead of 75 m. as directed &filling the same with excaveted soil including ramming dressing after all complete. The item includes necessary trimming the sides of trenches,levelling,dressing and ramming the bottom,bailing out water as required complete.Depth of excavation not exceeding 1,500 mm. |
| 4 | Reinforcement with 10mm dia MS rod for reinforced concrete work in all Sorts of Structures including distribution bars,stirrups,binders etc initial straighting and removal of loose rust(if necessary) cutting to requisite length,hooking and bending to correct shape ,placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(make-SAIL/IRNL and other approved make)(For Slab Reinforcement). |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 6 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.III) For built up sections / srtuctural members of specified sectionsweighing not less than 22.5 Kg./m. |
| 7 | (iv)Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off of chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary.(ii) With 1:4 cement mortar, 20 mm thick plaster. |
| 8 | Vertical submersible pumping machinery directly coupled with wet winding type suitable size submersible motor with following specification:-Discharge (Q) :-170 m³/Hr.Head (H): 40 mtrs,Outlet - 150 mm dia,Motor: Operating Voltage: 415 (± 10%), Phase: 3 Ph, 50 Hz ±6%,Speed: 2900 RPM, Power-30 KW/41 HP,Method of starting: S/D. (Make:- KSB/Texmo Other approved make)( Warranty certificate & Curve chart should be submitted at the time of delivery) |
| 9 | 200 mm dia, PN-1.0 Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & hinge pin of st.st.AISI 410, valve suitable for a maximum working pressure of 10 kg/cm2 (Seat test) & body tested to 15 kg/Sqcm.(Make:-Approved Make) |
| 10 | 3 Core X 16 Sqmm 1.1 KV Grade flat submersible copper conductor cable as per IS:694.(One For Star Other for Delta)(Make:-Gloster/Approved make) |
| 11 | 3.5 Core X 50 Sqmm Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC.(Make:-Gloster/Other approved make)(Test Certificate is to be submitted at the time of delivery) |
| 12 | 125 Amp, 415V, TPN S.F.U. with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc, spacious sheet steel enclosure, separate cable gland box not required, terminal shrouds on both sides and phase barriers included, conforms to IEC 60947-3, IS/IEC 60947-3, suitable for DIN fuse-link, door interlock & padlock facility incl. S & F 3 nos. DIN type HRC fuse-125 Amps rating.(Make:-L & K, FN 125 TPN, Cat No-SK90486 + Fuse Unit Cat No-SF94230/ Other approved make)(In Pump House) |
| 13 | 50 HP Star-delta starter, relay range 45 to 75 Amps, 3 Phase, 415 Volts, coil voltage-380 Volts.(Make:-L & K, Model No- MU-G50 FASD (With Wideband Coil), Cat No-CS96009COJO/Other approved make) |
| 14 | 200 mm dia Heavy duty long bend as per IS:2062. |
| 15 | 200 mm dia MS slip-on-flange Flange as per IS:1538. |
| 16 | 200 mm dia, M.S Black Pipe as per IS:1239(Part-I-2004), Class-C Heavy Duty type. |
| 17 | Suspension clamp for suspend the S/M P/M set from top of the CWR, Size Ǿ 200 mm dia X 100 mm width X 16 mm thick X 1 Mtr long suspension clamp. |
| 18 | Cost of reducer 200 mm X 150 mm with 1 feet long nipple, as per IS:1239. |
| 19 | 200 mm dia. 1.5 mtr length ERW M.S. column pipe having thickness 5.40 mm, (as per IS 1239 Part-I Heavy Type ) having at both flanged and painted by 2 coats of anticorrosive syntietic paint. |
| 20 | 150 mm dia Glycerine filled Diaphragm Seal type Gagues with syphon tube and three way cock and as per technical specification.Pressure Gauges (0-15 kg/ cm2)(At the delivery of S/M P/M) |
| 21 | Nuts and Bolts.(MOC:-CS) |
| 22 | Rubber sheet.(6 mm thick) |
| 23 | Installation of all items as mentioned in Sl.No. 1.01 to 1.15 No item including lowering of submersible pump into CWR by using derrick & chain pulley arrangement, pipe supports, valve supports, laying of cables through PVC Pipe, jointing with necessary jointing materials, laying of pipe & joining with 200 mm existing MS Line, fitting & fixing of Kiosk Box on the CWR also doing necessary connection, including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding etc, all complete as per relevent IE Rules, and upto entire satisfaction of EIC. |
| 24 | Testing & Commissioning of the entire installation i.e. Pumps, Motors, Valves etc.Painting of the installation (viz. valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer. |
| 25 | Add. GST@18% |
| 26 | Add. Cess@1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender