Tender For Improvement & Upgradation Of Lambidhar To Tikri Road Km 0/000 To 5/280. (Sh:- Construction of Earth Work , Protection Work , Cross Drainage Work, Road Side V-Shaped Drain, Metalling And Tarring, Road Safety Work And Dumping Structure In Km
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Aug 2026
11 days left
EMD
8.13 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement & Upgradation Of Lambidhar To Tikri Road Km 0/000 To 5/280. (Sh:- Construction of Earth Work , Protection Work , Cross Drainage Work, Road Side V-Shaped Drain, Metalling And Tarring, Road Safety Work And Dumping Structure In Km Rd 0/000 To 5/280.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in soil in hilly area in all heights and depths in all kinds of soil including saturated soil comprising of mixed soil, ordinary rock and hard rock. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damages to hill side, water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiseling and wedging out of rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines, grades, side slopes, width, camber, super-elevation and level as shown on the drawing and as directed by the Engineer-in-Charge in conformity with the requirement of MoRD technical specification for Rural Road, Section. 300 & 1600 to achieve designed formation width including hauling and stacking of materials useful for construction at suitable sites safe manner and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load and animal transport and mechanical means along with its leveling, fine dressing and carriage of machineries, tools, equipment’s and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. During the mobilization period, contractor should take the advanced x-sec in 15 m (fifteen metre) interval of whole road length in the presence of Engineer-in-charge or his representative. In case the advanced x-section has been taken in the presence of Engineer-in-Charge representative, in that case the same has to be got approved from Engineer-in-Charge. The land for dumping sites shall be arranged by the contractors himself and nothing extra shall be paid on this account, filling of unevenness blind age and finishing of the road to specified dimensions or as directed by the Engineer-in-charge for smooth riding. Recovery of stones that tune of 1051.50 Cum quantity ( One thousand Fifty one point fifty) cubic metres at the rate of 300/- (Rupees three hundred ) per cubic metre quantity shall be effected from the contractor's running bills on pro-rate basis as per actual quantity executed. Any loss to the public, private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all cases. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 2 | Earth work in excavation for all type of road structure such as retaining walls,Breast walls,culverts,drainds and parapets etcetra. in all types of classification of soil comprising of ordinary soil ,ordinary rock and hard rocks, chiselling/wedging out of rock (where blasting is prohibited) as per drawing and MORD 2014 Technical specifications Clause 305, 1101.4, 1603.4 section 300 & 1600 and as per direction of Engineer in Charge including setting out, shoring and bracing, removal of stumps and other deleterious material and disposal of material up to any lead and upto any lift, including dressing of sides and bottom and back filling in trenches with excavated suitable material to the orignal surface in layers not exceeding 150 mm (one hundred fifty milimeters) compected thickness including sorting and sturting and pumping and bailing out water (surface and sub soil water) up to all depth or any quantum of water including cleaning of slush which may arise out during dewatering . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 3 | Providing and Laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 P.C.C nominal mix 1:6:12 ( one cement : six sand : twelve graded crushed agregate) with 40 mm aggregates nominal size (Forty milimetre). The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 4 | Providing and Laying mechanically mixed and vibrated concrete for plain cement concrete nominal mix 1:4:8 ( one cement : four sand : Eight graded crushed / broken stone agregate 40 mm (Forty milimetre) nominal size for plain/reinforced concrete in open foundation complete in or under water complete including pumping or bailing out water dewatering removal of slush as required at site which may arrise at the time of laying under water complete for all heights/depths as per drawings and MORD 2014 Specifications Clause 802, 803, 1202 and 1203 section 800 & 1200 including the cost of form work and curring complete. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 5 | Providing and laying cement concrete grade M 10 (Ten) nominal mix 1:3:6 (one cement:three sand:six graded stone graded stone aggregate 20 mm (Twenty milimeter) nominal size concrete for plain/reinforced concrete in open foundations complete including form work as per drawings and M.O.R.D. 2014 technical specifications Clause 802, 803, 1202 & 1203 and section 800 & 1200 . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 6 | Providing concrete for plain/ reinforced concrete in open, foundation complete as per drawings and M.O.R.D 2014 technical specification clause 802, 803, 1202 & 1203 section 800, 1200. Nominal mix 1:2.5:5 (one cement:two point five sand : five graded stone graded stone aggregate M15 (fifteen) with 40 mm aggregates nominal size (Forty milimetre). including carriage of all labour, equipments and materials to various location through all modes of transportation . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 7 | Providing and Laying Precast Box Culvert having Size 1000x1000x1500 mm. (one thoussand *one thoussand * one thousand fuve hundred milimeter). The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 8 | Providing and laying of boulder apron laid in wire crates with 4 mm (four milimeter) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred into one hundred milimeter) mesh (woven diagonally) including 10 (ten) per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg (twenty five kilograms) each as per drawing and M.O.R.D. 2014 specifications Clause 1301. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 9 | Back filling with granular material behind retaning walls, abutment wing wall and return wall complete as per drawing and M.O.R.D. 2014 specification Clause 305.3.9 & 302.3.6 section 300 . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 10 | Providing weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm(one hundred milimeter) dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1206.6 section 600, 700 & 1200 . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 11 | Preparation of sub grade by dressing to combor (Earth work for the cutting involved for sub-grade to be paid for separately depending upon the classification of soil completed as per HP.PWD specifications. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 12 | Consolidation of sub grade with road roller including making good the undulation etc. with earth or quarry soil etc. and rerolling the sub-grade completed as per HP.PWD specifications. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 13 | Construction of subgrade and earthen shouldes with approved material obtained from borrow pits with all lift and lead, transporting to site,spreading ,grading to required slope and compacted to meet the requirement of Table 300.2 withlead upto 1000 m (one Thousand meter) as per technical specification clause 303.1. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 14 | Construction of granular sub base 150 mm thick (one hundred tfifty milimeter) by providing well graded matrial , spreading in uniform layers with tractor mount grader on prepared surface , mixing by mix in place method with ratovator at OMC, and compacting with three wheel 80-100 kn (eighty to hundred kilonewton) static roller to achieve the desired density, complete as per Technical Specification Clause 401. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 15 | Providing, laying, spreading and compacting stone aggregates of specific sizes 63 mm to 45 mm (sixty three millimeter to forty five milimeter ) Grading-II, 75mm (Seventy five millimeter) consolidated thick to water bound macadam specification including spreading in uniform thickness,using template hand packing, rolling with three wheel 80-100 (eighty to hundred)static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of size 11.2 mm (eleven point two millimeter) niminal size at the rate of 0.20 cum (zero point two zero cubic meter) per 10 square meter (Ten) and to fill up the interstices of course aggregate, watering and compacting to the required density as per M.O.R.D. 2014 technical specifications clause 1701 by mechanical means. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 16 | Providing, laying, spreading and compacting stone aggregates of specific sizes 53 mm to 22.4mm (fifty three millimeter totwenty two point four milimeter ) Grading-III, 75 mm (Seventyfive millimeter) consolidated thick to water bound macadam specification including spreading in uniform thickness,using template hand packing, rolling with three wheel 80-100 (eighty to hundred)static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of size 11.2 mm (eleven point two millimeter) niminal size at the rate of 0.18 cum (zero point one eight cubic meter) per 10 square meter (Ten) and to fill up the interstices of course aggregate, watering and compacting to the required density as per M.O.R.D. 2014 technical specifications clause 1701 by mechanical means. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 17 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface with hydraulic broom and spraying primer @ of 0.85 kg/sqm (zero point eight five kilogram per square meter) using mechanical means as per M.O.R.D. 2014 technical Specification Clause 502. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 18 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor @ 0.275 kg/sqm (zero point two seven five kilogram per square meter) on the prepared granular surface and cleaned with Hydraulic broom as per M.O.R.D 2014 technical specifications clause 503. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 19 | Providing and laying surface dressing as wearing course consisting of a layer of bituminous binder laid on the prepared surface, followed by a cover of crushed stone aggregates of specified size and rolling with three wheel 80-100 kN (eighty to hundred kilo Newton) static roller including cleaning the road surface as per Technical Specification Clause 507. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 20 | Providing and laying bituminous concrete 30 mm thick ( thirty milimetre ) with 100-120 (one hunderd -one hundred twenty ) TPH batch type hot mix plant producing an average output of 75 ( seventy five ) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 ( five point four to five point six ) per cent of mix and filler, and filler with Zycotherm 0.1% (zero point one percent) by weight of Bitumen transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respect. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 21 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm (three milimeter) thick corrugated sheet metal beam rail, 70 cm (seventy centimeter) above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm (one fifty into seventy five into five milimeter) spaced 2 m (two meter) centre to centre, 1.8 m (one point eight meter) high, 1.1 m (one point one meter) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm (one fifty into seventy five into five milimeter), 330 mm (three hundred thirty milimeter) long complete as per clause 810. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 22 | Providing and fixing of typical informatory sign board as per MORD specifications and drawing. Three MS plates of 1.6 mm thick , top and middle plate duly welded with MS flat iron 25mm*5mm (twenty five into five milimeter) size on back on edge. The lower plate will be welded with MS angle iron frame of 25mm* 25mm*5mm (twenty five into twenty five into five milimeter) , the angle iron frame of the lower most plate and flat iron frame of middle plate will welded to 2nos. 75mm* 75mm (seventy five into seventy five milimeter) of 12 (twelve) SWG sheet tubes posts duly embedded in cement concrete M15 (fifteen) grade blocks of 450mm* 450mm*600mm (four fifty into four fifty into six hundred milineter) , 600mm (six hundred milimeter) below ground level the top most diamond plate will be welded to middle and printing arrows, border etc. will be painted with ready mix syntheticenammel on both sides. Lattering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shades and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing M.O.R.D 2014 Technical Specification Clause 1701 and Annexure1700.1. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 23 | Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm (two milimeter) thick with area not exceeding 0.9 sqm (zero point nine squaremeter) supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm (seventy five into seventy five into six milimeter), 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 (fifteen) grade cement concrete 450 mm x 450 mm x 600 mm (four fifty into four fifty into six hundred milineter) , 600 mm (six hundred milimeter) below ground level as per approved drawing M.O.R.D 2014 Technical Specification Clause 1701. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 24 | Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm(two milimeter) thick with area exceeding 0.9 sqm (zero point nine squaremeter) supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm (four fifty into four fifty into six hundred milineter), 600 mm (six hundred milimeter) below ground level as per approved drawing M.O.R.D 2014 Technical Specification Clause 1701. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 25 | Reinforced cement concrete Mechanically mixed and vibrated M-15 (fifteen) grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and technical specifications rural roads August 2004 clause 1703.(ordinary kilometer stone precast). The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 26 | Reinforced cement concrete Mechanically mixed and vibrated M-15 (fifteen) grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and technical specifications rural roads August 2004 clause 1703. (200 m (Two hundred meter) stone pre cast). The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 27 | Reinforced cement concrete Mechanically mixed and vibrated M-15(fifteen) grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and technical specifications rural roads August 2004 clause 1703.(5th (Fifth kilometer) km stone pre cast). The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 28 | Providing and laying of hot applied thermoplastic compound 2.5 mm (two point five milimeter) thick including reflectorising glass beads @ 250 gms (two hundred fifty grams) per square meter. Area, thickness of 2.5 mm (two point five milimeter) is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level uniform and free from streaks and holes . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST, including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender