Tender For Dismantling And Reconstruction Of Unsafe Classrooms, Development Of Ground And Other Allied Works At Ghs Brij Nagar
Tender Value
29.13 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
9 days left
EMD
58260
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Satwari → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Dismantling And Reconstruction Of Unsafe Classrooms, Development Of Ground And Other Allied Works At Ghs Brij Nagar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Brick work with common burnt clay bricks of class designation 75 A in foundation and Plinth incl curing in cement mortor 1: 4 |
| 7 | Extra for brick work in super structure above plinth level above floor level 5 |
| 8 | Providing and laying Damp proof courese 50 mm thick with cement concrete 1:2:4 and curing complete |
| 9 | Reinforcemnet for RCC works incl straightening, cutting,bending placing in position and binding all completemild steel and mediumtensile steel bars incl all carriages and cost of material involved |
| 10 | Centring and shuttering incl strutting, propping etc and removal of formwork in Foundation including cost of material and carriage complete |
| 11 | Centring and shuttering incl strutting, propping etc and removal of formwork in Lintel Beams plinth Beams |
| 12 | Centring and shuttering incl strutting, propping etc and removal of formwork in Columns,Pillars,piers,abutments,postand struts |
| 13 | Centring and shuttering incl strutting, propping etc and removal of formwork in suspended floor, roofs, landings, Balconies and access Plateform |
| 14 | Centring and shuttering incl strutting, propping etc and removal of formwork in Edges of slab |
| 15 | Half Brick Massonary with common Burnt clay brick with class designation 75 A incl curing in cement mortor 1:4 |
| 16 | Extra for Half Brick Massonary in super structure above plinth level upto floor level V |
| 17 | Filling available excavated earth (excluding rock) in trenches Plinth sides of foundation etc in layers not exceeding 20 cm in depth consolidating each layer by 20 cum in depth lead up to 50 mtr |
| 18 | 12 mm cement plaster of mix 1:6 inner side |
| 19 | 15 mm cement plaster of mix 1:6 Outer Plaster |
| 20 | 6 mm cement plaster of mix 1:6 Outer Plaster |
| 21 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand andmanufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 22 | Providing and laying in Position cement concrete of specified grade incl curing all work up to Plinth level 1:2:4 complete |
| 23 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 24 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 25 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 26 | Distempering with oil bound washable distemperof approved brand and manufacture to give even shade incl cost of primer coat over new coat incl cost of carriage and material |
| 27 | Painting synthetic enamel paint of approved brand and manufacture on wood work (two or more coats) including primer coat incl cost of material and carriage involved |
| 28 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 110 Dia |
| 29 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm |
| 30 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood 30 mm |
| 31 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class deodar wood 35mm |
| 32 | Providing and fixing electric points complete in all respects as per necessity at site including laying of PVC conduit pipes, junction box, module,MCB and laying of electric wires of a approved make and thickness and fixing of switches, installation and testing complete job. |
| 33 | Labour engaged for various minor works Emergent nature required at site Labourer |
| 34 | Labour engaged for various minor works Emergent nature required at site Carpenter |
| 35 | Labour engaged for various minor works Emergent nature required at site Welder |
| 36 | Heir Charges of Welding Set including Welding rod Complete. |
| 37 | Supply and fixing 20/22 watt LED light/Tube/al. hosing with 2000 lumens |
| 38 | Supplying and fixing of ceiling fan 1200 mm Sweep of approved brands complete |
| 39 | Providing and fixing hold fast 40 x 5 cm iron hold fast including fixing and embeded in block of 1:3:6 concrete mix |
| 40 | Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less then grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screw etc complete 250x16 mm |
| 41 | Providing and fixing aluminium tower bolts ISI marked anodized (anodic coating not less then grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screw etc complete |
| 42 | Providing and fixing aluminium handle ISI marked anodized (anodic coating not less then grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screw etc complete |
| 43 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screw etc. complete |
| 44 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 45 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood |
| 46 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 47 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 48 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 49 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work |
| 50 | Finishing walls with acrylic smooth exterior paint of required shade on old work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 51 | stone aggregate and sand 10 km avg lead |
| 52 | Bricks 15 km avg lead Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender