Tender For Major Repair Of Ms Deora Nappu

Sharing tender

Tender For Major Repair Of Ms Deora Nappu- 1 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. (Not Exceeding 1.5 M In Width) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds 2 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:5:10 (1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) 3 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Exuding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: M10 4 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level - 1:1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) 5 Reinforced Cement Concrete Work In Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Upto Floor Five Level Including Curing But Excluding Cost Of Centering Shuttering, Finishing And Reinforcement. - 1:1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) 6 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Upto 15°, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Five Level Including Curing But Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With 1:1.5:3 7 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete 8 Regrading Terracing Of Mud Phaska Covered With Tiles Or Bricks, In Cement By Dismantling Tiles Or Bricks, Removing Mud Plaster, Preparing The Surface Of Mud Phaska To Proper Slope, Relaying Mud Plaster Gobri Leaping And Tiles Or Bricks, Grouted In Cement Mortar 1:3 (1 Cement: 3 Fine Sand), Including Replacing Unserviceable Tiles Or Bricks With New Ones And Disposal Of Unserviceable Material To The Dumping Ground (The Cost Of The New Tiles Or Brick Excluded) Within 50 Meters Lead. 9 Providing Gola 75X75 Mm In Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Stone Aggregate 10 Mm And Down Gauge), Including Finishing With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) As Per Standard Design. In 75X75 Mm Deep Chase. 10 Demolishing Brick Work Manually/By Mechanical Means Includingstacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge:- In Cement Mortar 11 Brick Work With Common Burnt Clay (Non-Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In :Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand) 12 Extra For Brick Work With Common Burnt Clay Bricks/Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level 13 Dismantling Steel Work In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates, Bolts, Nuts, Cutting Rivets, Welding Etc. Including Dismembering And Stacking Within 50 Meters Lead. 14 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Welded 15 Demolishing Cement Concrete Manually/By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-Incharge: 1:4:8 Or Leaner Mix (I/C Equivalent Design Mix) 16 Providing And Laying 60Mm Thick Factory Made Cement Concrete Interlocking Paver Block Of M-30 Grade Made By Block Making Machine With Strong Vibratory Compaction And Of Approved Size And Design/Shape Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Fine Sand, Filling The Joints With Coarse Sand Etc. All Complete As Per Direction Of Engineer-In-Charge. 17 Demolishing Cement Concrete Manually/By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-Incharge - 1:3:6 Or Richer Mix (I/C Equivalent Design Mix) 18 Providing And Laying Matt Finished Vitrified Tile Of Specified Size Having Water Absorption Less Than 0.5% And Conforming To Is: 15622 Of Kajaria Or Somany Or Johnson Or Cera Or Nitco Make In All Colours And Shades In Outdoor Floors Such As Footpath, Court Yard Multi Models Etc., Laid On 20Mm Thick Base Of Cement Mortar 1:4 (1Cement: 4 Coarse Sand) In All Shapes & Patterns Including Grouting The Joints With White Cement Mixed With Matching Pigments Etc. Complete As Direction Of Engineer-In-Charge. (Size 300X300X9.8 Mm) 19 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer), Of Kajaria Or Somany Or Johnson Or Cera Or Nitco Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 20 Kota Stone Slab Flooring 25 Mm Thick Over 20Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment Tomatch The Shade Of The Slab, Including Rubbing, Polishing And Curing Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) : 21 Repairs To Plaster Of Thickness 12Mm To 20 Mm In Patches Of Area 2.5 Sq. Meters And Under, Including Cutting The Patch In Proper Shape Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 Meters Lead With Cement Mortar 1:4 (1 Cement : 4 Fine Sand) 22 12Mm Cement Plaster Of Mix - 1 : 4 ( 1 Cement : 4 Fine Sand) 23 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete - 1 Mm Thick 24 Distempering With 1St Quality Acrylic Distemper (Ready Mixed)Having Voc Content Less Than 50 Gms/Litre,Two Or More Coats On New Work Of Approved Manufacturer, Of Required Shade And Colour Complete As Per Manufacturer’S Specifications 25 Finishing Walls With Water Proofing Cement Paint Of Required Shade Onnew Work (Two Or More Coats Applied @ 3.84 Kg/10Sqm) 26 Taking Out Doors, Windows And Clerestory Window Shutters (Steel Or Wood) Including Stacking Within 50 Meters Lead :- Of Area Of 3 Sqm. And Below 27 Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40X6Mm Angle Iron And 3Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer - Using Flats 30X6Mm For Diagonal Braces And Central Cross Piece. 28 Painting On G.S. Sheet With Synthetic Enamel Paint Of Approved Brand Andmanufacture Of Required Colour To Give An Even Shade On Old Work (One Or More Coats 29 Providing And Fixing Isi: 12817 Marked Stainless Steel Butt Hinges With Stainless Steel Screws Etc. Complete. 100X58X1.90 Mm 30 Providing 40X5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embeddings In Cement Concrete Block 30X10X15 Cm 1:3:6 Mix ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). 31 Providing And Fixing Aluminum Handles Isi Marked Anodized (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade With Necessary Screws Etc. Complete. 32 Providing And Fixing Aluminum Pull Bolt Lock Anodized Isi Marked (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade With Necessary Screws Bolt Nuts And Washers Etc. Complete. 33 Providing And Fixing Fly Proof Wire Gauge To Windows And Clerestory Windows Using Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions All Complete. - With 12 Mm Mild Steel U Beading 34 Providing And Fixing On Wall Face Un-Plasticized Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10 Mm Gap For Thermal Expansion. Single Socketed Pipes 110 Mm Diametre 35 Providing And Fixing On Wall Face Un-Plasticized Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10 Mm Gap For Thermal Expansion.(I) Single Socketed Pipes - 75 Mm Diametre 36 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. External Work Including Trenching, Refilling Etc. 15Mm Nominal Outer Dia Pipes. 37 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe With Manually Controlled Device (Handle Lever), Conforming To Is:7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Isi Marked White Solid Plastic Seat And Lid. 38 Providing And Fixing Wash Basin With C.I. Brackets, 15Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required :White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm C.P. Brass Pillar Tap. 39 Providing And Fixing White Vitreous China Pedestal For Wash Basin Completely Recessed At The Back For The Reception Of Pipes And Fittings. 40 Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260X350 Mm And 340X410X265Mm Sizes Respectively. 41 Providing And Fixing 8 Mm Dia C.P. / S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Triangular Plate To European Type W.C. Of Quality And Make As Approved By Engineer - In - Charge. 42 Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Brackets Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms. 43 Providing And Fixing Ptmt Towel Ring Trapezoidal Shape 215 Mm Long, 200 Mm Wide With A Minimum Distance Of 37 Mm From Wall Face With Concealed Fittings Arrangements Of Approved Quality And Colour, Weighing Not Less Than 88 Gms. 44 Providing And Fixing Mirror Of Superior Glass (Of Approved Quality) And Of Required Shape And Size With Plastic Moulded Frame Of Approved Make And Shade With 6 Mm Thick Hard Board Backing.Rectangular Shape 453X357 Mm 45 Providing And Fixing 100 Mm Sand Cast Iron Grating For Gully Trap. 46 Providing And Fixing 15 Mm Nominal Bore C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Make Conforming To Is : 8931. 47 Providing And Fixing 15 Mm Nominal Bore C.P. Brass Bib Cock Of Approved Quality Conforming To Is : 8931 (Short Nose). 48 Providing And Fixing On Wall Face Un-Plasticized - Pvc Moulded Fittings/ Accessories For Un Plasticized Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion. Coupler 75 Mm Bend 49 Providing And Fixing On Wall Face Un-Plasticized - Pvc Moulded Fittings/ Accessories For Un Plasticized Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion. Coupler 110 Mm Bend 50 Providing And Fixing On Wall Face Un-Plasticized - Pvc Moulded Fittings/ Accessories For Un Plasticized Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion Bend 87.5° 75 Mm Bend