Tender For Providing Additional Arrangement Of Raw Water Pumping System At Gosaba Pond Based Water Supply Scheme From Pond No 4 At Gosaba Block Under South 24 Pgs Mechanical Division, Phe Dte.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Aug 2026
13 days left
EMD
13600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Additional Arrangement Of Raw Water Pumping System At Gosaba Pond Based Water Supply Scheme From Pond No 4 At Gosaba Block Under South 24 Pgs Mechanical Division, Phe Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & delivery of following pumping machinery at site as per following :- [(Make- Any approved vendor of PHED) ;( Rate is inclusive of riverine charges @ 5.0 %)] |
| 2 | Submersible Dewatering Pump of Capacity : 200 – 1200 LPM , Head : 39 – 20 MTRS ., outlet size : 80 mm, 2850 RPM suitable for 415 Volts, 3 Phase, 50 Hz. A.C. , D.O.L. Starting , Dry type motor with 10 Mtrs. Cable ; [ Make- Darling(DJ 102 ) / any other approved make of similar specification ]The motor should have i) inbuilt controller i.e. protection againsts dry running , overloading , mechanical jamming etc ,ii) Capable of withstanding wide voltage fluctuations, iii) Heavy duty ball bearing at TOP & bottom ; iv) suitable for vertical type installation .. [Materials Data :::: Impeller : CA-15 / CF8/CF8M ;; Shaft : AISI-410/ SS304 / SS-316 :: Difusser : Various grades of CI / AL / SS ;; Wear Plate :Various grades of CI / SS ; Mech. Seal : Sic v/s Sic / Tc v/s Tc ;; Process Data :::Liquid temp.: Max. 40 deg. cent. ;; Suitable for Liquid pH : 6 to 8 ; ; strainer Hole Size : upto 16 mm ] |
| 3 | 3\\"(80 mm.) Dia 4 mm thick Heavy Ms Black Pipe |
| 4 | 3\\"(80 mm.) MS 90° Bend |
| 5 | 3\\"(80 mm.) MS IS Companion flange (16 mm thickness) |
| 6 | 4\\" (100 mm) MS IS Companion flange (16 mm thickness) |
| 7 | 100 mm X 80 mm MS reducer (Heavy type) |
| 8 | Single door CIDF Non Return valve -Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of st.st.AISI410, valve suitable for a maximum working pressure of 10/16 kg/cm2 (Seat test) & body tested to 15/24 kg/Sqcm. |
| 9 | 3\\"(80 mm.) CIDF Non Return valve (PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)] |
| 10 | 6'(150 mm ) CIDF Non Return valve ( PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)] |
| 11 | 1.1 KV grade 4 sq.mm. 3 core copper water proof Flat Submersible Cable |
| 12 | 1.1 KV grade 4core 16 Sq mm Al. Ar. XLPE Cable as per IS: 7098(Part 1) 2011 with upto date Amendments |
| 13 | Three Phase submersible pump controllers with single phase preventer with overload relay range 13-21 Amps , 415 V , 50 Hz, coil voltage: 360V-415V including Voltage , current , Phase indicating arrangement etc. |
| 14 | Nut & Bolt different type of lugs, different type of gasket,& other different accessories used for the installation purpose; [ Quantity to be supplied as per actual site requirement ][[ A. } Nut bolt size-Quantity as required ; i} 5/8\\" x 2 \\" long ; ii} 5/8\\" x 2.5\\" long ,iii} 1/2\\" x 2\\" long,iv} 10 mm x 25 mm long, ; B } 25 mm x 1000 mm x3 mm thick GI flat. ; C } Gi wire,; D} Gi wire net 1' x 4' ; E. } 80 mm flange rubber gasket 5 mm thick ; F }Cable protection pvc pipe 3/4 inchi..]] |
| 15 | MS supporting structure make by different size MS angle(IS: 808-2021) & MS C Channel(IS:2062:E250A-2006) for pump hanging & Delivery pipe line support Details as follows - [A } (100 X 50 X 5)mm C-Channel-6.5mtr x 4 Nos.- 26m @ 9.56 Kg / mtr = 248.56 Kg; B. } (75 X 40 X 5)mm C-Channel-(0.75mtr x 4 Nos. + 4 m x 1 No.)- 7 m @ 7.14 Kg / mtr = 49.98 Kg; C.} (50 x 50 x 5 )mm MS Angle - 4.5 m x 4 Nos.=18 m @ 3.8 kg /m = 68.4 kg ; ][Rate Analysis : Total MS material ( 248.56 +49.98 + 68.40 Kg) + 10 % wastage for cutting etc. = 404 Kg. @ 79/-] |
| 16 | Charges for construction of MS angle and Channel as per above mentioned dimensions including cutting , drilling of proper sized holes , scraping , primary paint through Red oxide , final paint with Black Japan etc. all complete as per direction of EIC. This is alsoincluding hiring of all required tools and tackles also. |
| 17 | Submersible pump installation in the pond-based water supply scheme at GOSABA from the pond is all 3\\" dia. MS newly piped line welding, flange welding, joining & fittings of the pipeline with different types of valves, MS support structure made for the pump & pipeline, road crossing arrangement, power cable laying, dismentling & installation of dept. supplied 2 nos. 150 mm dia sluice valve , 1 no. 80 mm dia NRV & 2 Nos.150 mm dia newly supplied NRV , starter panel installation, & commissioning of the pump, all complete as per direction of EIC.This changes also including in working inside pond , earth excavation , cable protection , cable termination etc. and hiring of all required tools and tackles also. |
| 18 | Add GST @ 18% |
| 19 | Add Cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender