Tender For Supply & Installation Of Valves And Allied Repairing Work At Baruipur Non Kmda Arsenic Affected Area Surface Based W/S Project Under South 24 Pgs. Mechanical Division, Phe Dte.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Aug 2026
13 days left
EMD
14000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply & Installation Of Valves And Allied Repairing Work At Baruipur Non Kmda Arsenic Affected Area Surface Based W/S Project Under South 24 Pgs. Mechanical Division, Phe Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Supply,delivery of cast Iron flageless wafer type rubber lined actuator operated Butterfly valve but without actuator suitable for P.N 1.6 rating,general conforming to IS : 13095, Size :100mm (Make-IVI/Jupiter /Other approved make) |
| 2 | Supply,delivery of cast Iron double flange ellectrically gear operated butterfly valve but without actuator suitable for PN 1.6 rating,generally conforming to IS: 13095,Size: 200mm (Make-IVI/Jupiter /Other approved make) |
| 3 | Supply, delivery of cast iron Double flange non return valve,as per IS:5312,part suitable for PN 1.6 rating. Size:100mm (Make-IVI/Jupiter /Other approved make) |
| 4 | Supply,delivery of cast iron double flange non return valve as per IS: 5312,part-1 suitable for PN 1.6 rating. Size:200mm (Make-IVI/Jupiter /Other approved make) |
| 5 | Repairing of MS flanged Dismantling joint after dismantling from existing position,clean the internal & external surface,replacing the new rubber complression ring.glavanised iron stud and nut bolts,suitable for PN 1.0 rating size:100mm |
| 6 | Repairing of MS flanged Dismantling joint after dismantling from existing position,clean the internal & external surface,replacing the new rubber compression ring ,galvanised iron stud and nut bolts,suitable for PN 1.0 rating Size:200 mm |
| 7 | Strengthening the main frame structure by providing additional support welded in the core, stripping off the worn out,providing extra plate welded in the damaged portion and machining with proper alighment.(Dismantling and re-installation of the pump sets one bu one if required) |
| 8 | Providing RCC foundation for pump sets within the main frame structure including supply of necessary materials like cement ,sand,stone chip.reinforcement,shuttering materials etc as per direction of EIC. |
| 9 | Opening the valve actuator and its power & control cable,dismantling the existing valve,dm joint ettc.Installation of new supplied valves includingsupply of all erection hardware like,nut bolts,gasket etc. Re-installation of the actuator with new valve with proper alignment and reconnection of all power & control cable ,testing & commissioning of the total system as per direction of EIC. |
| 10 | Painting of the installation by two coats of enamel paints(Colour to be decided by purchaser)over a coat of prumer after removing the rust by sand paper as per direction of EIC |
| 11 | Supply & Laying of 1.1 KV Gr. 2 core 6 sq.mm XLPE Armored Alu. Cable(make-GLOSTER/HAVELLS/FINOLEX) on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting as directed by EIC. (Cable shall be procured as per site requirement) |
| 12 | Supplying and fixing 2+4 way SPMCB with 40A DP Isolator-1no & 6-32 Amp-3-nos 240/415 V MCB of Breaking capacity 10kA & B characteristics with MCB enclosure and necessary connection as per direction of EIC.(M-Legrand/havells/ABB) |
| 13 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry 1.1 KV Gr. 2 core 6 sq.mm XLPE Armored Alu. Cable incl. Finishing the end of the same by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials as per direction of EIC. |
| 14 | Supply and fitting of 90 watt LEd street light luminarie of PHILIPS Make & fitting the same on the top of the pump house by supplying 2\\" dia. M.S./G.I. Pipe with header by clamping arrangement and drawing power line by supplying required wiring materials within the pump house including earthing the installation as per I.E. Rules. as per direction of EIC. (Make:Phlips Type- cat no-BRP333 LED 110 CW R5C FG PSU S1V1/other approved make ) |
| 15 | Supply & Laying of 1.1 KV Gr. 3.5 core 25sq.mm XLPE Armored Alu. Cable(make-GLOSTER/HAVELLS/FINOLEX) on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting as directed by EIC.(as per site requirement) |
| 16 | S&F 415V 6 way Horizontal TPN MCBDB with double door SS enclosure(607716) with IP-42/43 protection having 1 no 63A 4 pole isolator and 12 nos ('C' Serise 10ka) 16-32A SPMCB concealed in wall after cutting the wall & mending good the damages to, original finish incl. ionterconnection with suitable copper wire and neutral link & provision for earthing attachment as per G.S.(Make-Legrand /Siemens/ABB)(PWD SOR-PG-D10 ITEM NO-14,D5 item no-6) |
| 17 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface] |
| 18 | a)Average Run 5 Mtr) |
| 19 | b)on board |
| 20 | Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, ittings etc.(As per site requirement) |
| 21 | 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) |
| 22 | 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) |
| 23 | 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) |
| 24 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc |
| 25 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. |
| 26 | Suppy & Fixing of 20 watt wall mounted LED Batten with polycarbonate housing & integrated electronic driver . Make - Philips/havells or other approved |
| 27 | Supply & Fixing only pendent light fitting complete with 9W LED lamp(M-Philips/Havells/Crompton Greaves), shade and 24/0.2 mm (1.5 sqmm) flexible copper wire incl. S&F pendent holder |
| 28 | S&F of 240V 48\\" sweed BEE 3 star rating(minimum) AC ceiling fan (make Crompton Greaves-cool Breeze or equivalent model of orient- GRATIA HS TOPAZ GOLD) as directed by EIC. |
| 29 | Add GST @ 18% |
| 30 | Add Cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender