Tender For Repairing/Replacement Of Different Electro-Mechanical Accessories (Viz. Pumping Machinery, Control Panel Etc.) Including Allied Works At The Newly Sunk Tube Well Of Ph No. - 1 Under Jalilpur Pwss Under South 24 Pgs. Mechanical Division, Ph
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Aug 2026
5 days left
EMD
9300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing/Replacement Of Different Electro-Mechanical Accessories (Viz. Pumping Machinery, Control Panel Etc.) Including Allied Works At The Newly Sunk Tube Well Of Ph No. - 1 Under Jalilpur Pwss Under South 24 Pgs. Mechanical Division, Phe Dte. (Block : Bishnupur - I)
BOQ
| Sl. No. | Item Description |
| 1 | Lowering the Pumping Machinery |
| 2 | Dismantling and taking out the valves, specials, gauges etc. from the old, existing system after disconnecting the relevant electrical/mechanical connections by applying proper T&P and engaging competent manpower followed by segregating the dismantled items into serviceable an unserviceable ones as per direction of EIC. |
| 3 | Supply and delivery of the following submersible pumping machinery and electrical accessories at site :- |
| 4 | Submersible pumping machinery, directly coupled with water proof motor of suitable rating, having following specifications :- P U M PDISCHARGE - 700 LPM / 42 m3/hrH E A D - 70 mS H A F T - SSIMPELLER - Bronze/GM/SS/Chrome SteelOutlet size - 65/80 mmMOTORSubmersible type 3Ph, 50Hz,A.C.415V+ 10% Wet type. winding – RPM – 2900 (S/D Starting arrangement)(Preferably 17.5HP)(Make-Approved make)[(A) H/Q Characteristic Curve Chart of pump set should be submitted before delivery. (B) Test Certificate & Warranty Certificate of pump set should be submitted during delivery.] (Make-Approved make) |
| 5 | 1.1 kV grade 6 sq.mm x 3 Core water proof flat submersible cable for above motor (Make-Approved make). |
| 6 | 1.5 sqmm x 12 core copper cable for actuator motor (Make-Approved make). |
| 7 | Supply and delivery of the following pipes, specials etc at site: |
| 8 | 3 mtr long 80 mm dia UPVC standard type column pipe [cream colour] with both side threaded and one end side socketed with registered KPMG. |
| 9 | 1.5 mtr long 80 mm dia UPVC standard type column pipe [cream colour] with both side threaded and one end side socketed with registered KPMG. |
| 10 | 80 mm dia CI top & bottom adopter. |
| 11 | Heavy type suitable dia MS suspension clamp along with nuts, bolts and washer. |
| 12 | CIDF 90° bend-1no., CI flanged tee-1no. blank flange-1no., CI/ MS flanged short piece 0.50 mtr.-1no, CI/ MS flanged pipe 1 mtr. 1 no. etc as per IS specification and certification for construction of delivery pipe line and wash out line. |
| 13 | 65 mm dia x 150 mm long G.I. short piece. |
| 14 | 80 mm x 65 mm G.I. reducing socket. |
| 15 | 80 mm dia rubber gasket. |
| 16 | 5/8\\" dia x 3\\" long MS Nut, Bolt with Washer. |
| 17 | Heavy type 300 mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry with 2 sets heavy type suspension clump, nuts, bolts and washer as per departmental design. |
| 18 | 50 mm. dia. non metalic pipes (IS:14930) and specials for protection of submersible cable and actuator cable. |
| 19 | Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials. |
| 20 | 100A rewirable type male female kit Kat fuse unit (Make-Approved make). |
| 21 | Installation of the above supplied pump, valves (existing) and specials as in Sl. No. 2 & 3 including supply of cable gland, sockets etc including brick, sand, cement rod etc as required to complete the job as per direction and up to the entire satisfaction of the EIC. |
| 22 | Making brick pillar 0.25 mtr x0.25 mtr. for supporting of valves and pipes with 12 mm thick plaster and neat cement finish complete. |
| 23 | Making suitable size pump foundation with supplying of necessary cement, sand and stone chips including plastering and net cement finish complete. |
| 24 | Upgradation of the existing Panel |
| 25 | Dismantling and taking out the accessories (defective or incompatible with the newly installed pumping machinery) from their existing position therefrom the panel after disconnecting the power line as per direction of EIC. |
| 26 | Supply and delivery of the following materials at site :- |
| 27 | MPCB (32A-40A) (Make-Siemens/Approved make) |
| 28 | TP Power contactor, AC-3 Duty, 40A, 230V, AC (Make-ABB/Approved make) |
| 29 | TP Power contactor, AC-3 Duty, 25A, 230V, AC (Make-ABB/Approved make) |
| 30 | Capacitor (8.3 kVAR)(Make-Epcos/Approved make) |
| 31 | 24 Hour Clock timer (Digital)(Make-GIC/Approved make) |
| 32 | Voltage monitoring relay (Make-Siemens/Approved make) |
| 33 | LED Indicator (Red) 230V, AC (Make-Siemens/Approved make) |
| 34 | LED Indicator (Yellow) 230V, AC (Make-Siemens/Approved make) |
| 35 | LED Indicator (Blue) 230V, AC (Make-Siemens/Approved make) |
| 36 | Fitting & fixing of the above supplied accessories (Item No. 8.01-8.09) in position by engaging competent personnel including necessary interconnection complete. |
| 37 | Testing and commissioning of the entire installation up to entire satisfaction of EIC. |
| 38 | Add GST @ 18% |
| 39 | Add Cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender