Tender For Supply, Installation And Commissioning Of Submersible Pumping Machinery Along With Allied Accessories At Newly Sunk Tube Well, T.W. 1 Of Mch Canning Sub Division Hospital (Matri Maa) Under South 24 Pgs Mechnical Division Phe Dte.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Aug 2026
17 days left
EMD
23000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation And Commissioning Of Submersible Pumping Machinery Along With Allied Accessories At Newly Sunk Tube Well, T.W. 1 Of Mch Canning Sub Division Hospital (Matri Maa) Under South 24 Pgs Mechnical Division Phe Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and delivery at site of the following submersible pumping machinery and electrical |
| 2 | Submersible pumping machinery directly coupled with water proof suitable size motor having following specification and as per NIT specification:PumpShaft-stainless steelImpeller- S.S/ GM/Chrome SteelOutlet Size: 65/80/100 mm.Motorsubmersible type 3 Ph , 50Hz, 415 Volt ± 10% 2900 RPMMotor must be suitable for operation with SD starter. Test certificate along with characteristic curve should be submitted at the time of delivery. (Make- approved make of PHED) |
| 3 | TW-I, Discharge- 333 LPM, Head- 52 Mtr |
| 4 | 1.1 KV grade 2.5 sq.mm x 3.5 Core water proof flat submersible cable for above motor. (Make- approved make of PHED) |
| 5 | 1.1 kv GRADE 25 sq.mm 3.5 core XLPE insulated Al. Ar. armoured cable conforming to IS 7098 (Part-I) 1988, with upto date amendments. (Make- approved make of PHED) |
| 6 | 63A Re-wireable type TP main switch with neutral link (Make- approved make of PHED) |
| 7 | Supply, delivery and storage at site of Wall mounted 2 mm. thick epoxy painted sheet steel enclosed front open fully automatic cum manual control motor control centre for operation of the pump motor in SD mode ranging from 5 HP to 7.5 HP, actuator with RDOL starter, Chlorinator with DOL starter and timer operated outdoor and indoor lighting as per enclosed specification: (Make- approved make of PHED) |
| 8 | Supply and delivery of the following valves, pipes and gauges etc at site: (Make- approved make of PHED) |
| 9 | 3 mtr long 80 mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG. |
| 10 | 1.5 mtr long 80 mm dia MS standard type column pipe (cream color) with both side threaded and one end side socketed with registered KPMG. |
| 11 | 80 mm dia CI top & bottom adopter. |
| 12 | Heavy type suitable dia MS suspension clamp along with nuts bolts and washer. |
| 13 | Cast Iron wafer type 3 phase actuator operated wafer type butterfly valve of 80 mm dia [PN-1.0] as per IS; 13095, IP-68. (Make- approved make of PHED) |
| 14 | 80 mm dia CIDF sluice valve-1 no., Non Return Valve-1 no., CIDF 90° bend-1no., CI flanged tee-1no. blank flange-1no., CI/ MS flanged short piece 0.50 mtr.-1no, CI/ MS flanged pipe 1 mtr. 1 no. etc as per IS specification and certification for construction of delivery pipe line and wash out line. (Make- approved make of PHED) |
| 15 | Heavy type 200 mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry with 2 sets heavy type suspension clump, nuts, bolts and washer as per departmental design. |
| 16 | Depth gauge 100 mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump[This cost includes 15 mm. dia G.I. pipes and specials]. (Make- approved make of PHED) |
| 17 | Pressure gauge 150 mm dia [0-7Kg/Sq.cm] brass cock and fitting complete[This cost includes 15 mm. dia G.I. pipes and specials]. (Make- approved make of PHED) |
| 18 | 50 mm. dia. non metalic pipes (IS:14930) and specials for protection of submersible cable. |
| 19 | Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials. |
| 20 | 63 Amps rewirable type male female kit Kat fuse unit |
| 21 | Laying of 25 sq. mm. 3.5 core AL. ar. Cable in wall/ floor by supplying of all necessary materials as per IE Rules and as per direction. |
| 22 | Installation of above pump motor, panel, valves and specials as in sl. NO. 1 & 2 including supply of cable gland, sockets etc including brick, sand, cement rod stc as required to complete the job as per direction and up to the entire satisfaction of the EIC. |
| 23 | Making brick pillar 0.25 mtr x0.25 mtr. for supporting of valves and pipes with 12 mm thick plaster and net cement finish complete. |
| 24 | Making suitable size pump foundation with supplying of necessary cement, sand and stone chips including plastering and net cement finish complete. |
| 25 | Making double earthing arrangement in compliance with IE rules by G.I. pipe electrode of 50 mm. dia 3 mtr. Long 2 Nos for panel and pumping machinery 25 mm. x 6 mm. G.I. earth strips from earth pit to panel and all other accessories required to complete the work. |
| 26 | Making internal electrification of pump house consisting of two bracket point, one tube light point, two bulk head point, one fan point and 1 NO. 90 watt LED fixture with arm bracket at outside and one three pin plug point including supply of all necessary materials to complete the work as per IE rules and as per direction [All the fittings and lamp should be LED type as per choice of EIC]. |
| 27 | Supply, delivery and storage of the following materials at site as per sample for voltage stabilizer |
| 28 | 15 KVA AC 200V-500V AC 3 phase 50 Hz OIL cooled type, microprocessor based servo motor operated wound line voltage corrector conforming to IS-9815 [Pt-I] 1994 suitable for unbalanced input voltage as per enclosed specification including first filling of oil as per requirement. (Make- approved make of PHED) |
| 29 | 63 amps 4 pole 415 Volt with breaking capacity 25 Ka MCCB with adjustable overload and short Circuit protection including enclosure. (Make- approved make of PHED) |
| 30 | 63 amps 4 pole 415 Volt change over switch in sheet steel enclosure. (Make- approved make of PHED) |
| 31 | 63 amps 4-Way Copper Busbar Chamber, wall mounted (Make- approved make of PHED) |
| 32 | 1.1 kv GRADE 25 sq.mm 3.5 core XLPE insulated Al. Ar. armoured cable conforming to IS 7098 (Part-I) 1988, with upto date amendments. (Make- approved make of PHED) |
| 33 | Installation with testing and commissioning [operation for 3 days with load] of the above voltage stabilizer with necessary foundation along with the necessary accessories [Sl. No.9] in the suitable position at the pump house and drawing cable with MS saddle, making all electrical connection with necessary socketing by crimping method and complete the work as per direction of the EIC |
| 34 | Supply, delivery and storage at site of automatically controlled diaphragm type chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10 Kg/ CM² with all accessories for pump & motor, foundation bolt, suction and discharge Flange and with storage tank of dosing solution of 100 Ltr. Capacity and the prime mover to be coupled with pump of 0.5 H.P. 3 Phase, 1450 RPM squirrel cage TEFC induction motor, Motor will be IE2/ IE3. (Make- of Machine Swelore/ Any other approved Make of Motor: KEC/CGL/ABB/Any other approved make) |
| 35 | Installation and commissioning of above supplied chlorinator with all accessories, PVC tank and drawing of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stone chips] and neat cement finish by supplying of all required materials and testing the entire set as per direction of EIC. [Power will be feed from PLC panel of pumping machinery] (Make: Approved Make) |
| 36 | Supply and fitting fixing of 90 Watt LED light set (Make-Philips Model-BRP-333LED 110) with 1 no 40mm dia 1.5 mtr long Gi pipe bracket fixed on the roof of the pump house with properly grout inlcuding making power connection by 2x1.5 sq.mm copper FR grade flexable wire through PVC casing/conduit with drawing earth conducter (1 sq.mm copper fexable wire), fitting fixing of 15 amp switch on board with all complete as per direction of EIC. |
| 37 | Supply and Delivery of the Moulded Chair as per following make & model. A) Make: Supreme (Model- Dream) B) Make: Nilkamal (Model - CHR-4002)Any other make approved by EIC. |
| 38 | Supply and Delivery of the Moulded Table as per following make & model A) Make: Supreme (Model-Arjun) B) Nilkamal (Model - Marvel) C) Any other make approved by EIC |
| 39 | Supply transportation and delivery of Calcium hypochlorite granule minimum Cl content 65% in air tight plastic jar 3Kg/5Kg each to suitably located store/Divisional office and subsequent transportation to deliver the consignment safely to geographically and sparsely distributed, pump houses throughout the entire district under consideration on monthly requirement basis including loading, handling, unloading, insurance and octroi etc. for different pump houses (1072 Nos.) for disinfection of potable drinking water as per enclosed list detailed in Annexure-l in the different district as per direction of EIC. (Test Certificate should be submitted at the time of delivery) |
| 40 | Testing and commissioning of the entire installation with full satisfaction of EIC. |
| 41 | Labour charges for 1 no operating personnel for operation & guarding of pump/valve/disinfection arrangement with all accessories |
| 42 | Add GST @ 18% |
| 43 | Add Cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender