Tender For Procurement Of Material & Hiring Of Labour For Day-To-Day Maintenance & Repair Of Various Electrical Assets Of Mcd In Ward No. 82 Under Karol Bagh Zone.
Tender Value
5 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
0 days left
EMD
10550
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Procurement Of Material & Hiring Of Labour For Day-To-Day Maintenance & Repair Of Various Electrical Assets Of Mcd In Ward No. 82 Under Karol Bagh Zone.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 2 | Supply of 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 3 | Supply of 4 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 4 | Supply of 6 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 5 | Supply of 10 sq. mm ISI marked, FRLS PVC insulated, |
| 6 | Supply of S.P. 5/6 amps, one way modular switch, ISI marked |
| 7 | Supply of S.P. 15/16 amps, one way modular switch, ISI marked |
| 8 | Supply of 3 pin 5/6 amps modular socket outlet, ISI marked |
| 9 | Supply of 6 pin 15/16 amps modular socket outlet, ISI marked |
| 10 | Supply of S.P. 5/6 amps, one way switch,Piano type ISI marked |
| 11 | Supply of S.P. 15/16 amps, one way switch,Piano type ISI marked |
| 12 | Supply of 3 pin 5/6 amps socket outlet,Piano type ISI marked |
| 13 | Supply of 6 pin 15/16 amps socket outlet,Piano type ISI marked |
| 14 | Supply of 3 pole MCCB, 100A, 16KA |
| 15 | Supply of 4 pole MCCB, 100A, 30KA |
| 16 | Supply of 4 pole MCCB, 250A, 36KA |
| 17 | Supply of 10 amps. ratings , SP MCB, “C” curve,10 KA breaking capacity |
| 18 | Supply of 32 amps. ratings , SP MCB, “C” curve,10 KA breaking capacity |
| 19 | Supply of 63 amps., 2 pole isolator |
| 20 | Supply of 20 amps. SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure |
| 21 | LED Batten light (System lumen efficacy ≥120<135 lm/Watt) Supplying of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C)Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)18- 22 watt |
| 22 | Brush Less Direct Current (BLDC) Motor Supply of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al bodyPower Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req.1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 23 | Replacement of fan condenser 2.5 mfd as required. |
| 24 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120<135 lm/Watt). Supply of Street light LED fixture, powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3- 2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120<135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 45W |
| 25 | Supply and fixing of 32mm dia X 1 meter long G.I. Pipe (Medium Class) bracket for mounting of fluorescent/HPMV/HPSV Street Light fitting on pole including bending the pipe to the required shape , 2 nos 25mm X 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd. |
| 26 | Supply of PVC insulated and FR PVC Sheathed multicore copper conductor 1.1KV grade, conforming to grade IS 694 as required . 3*1.5 Sq.mm |
| 27 | Supply of XLPE insulated PVC sheathed Al. Conductor Un-Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*6 sqmm |
| 28 | Providing of 1 no. skilled electrician for execution of electrical works including wiring, fitting and testing as required at site for 150 days as per terms and condition of contract.(1X1X150) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender