Civil Aviation Boards / Undertakings / PSU Closing in 17 days TDR #56853433

Tender For Provision Of Ht Cable For Additional Power Supply From Different Source From Cspdcl At S.V. Airport Raipur.

Issued by Boards / Undertakings / PSU · Raipur, Chhattisgarh
Tender Value
92.45 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
17 days left
EMD
2.77 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Raipur → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Provision Of Ht Cable For Additional Power Supply From Different Source From Cspdcl At S.V. Airport Raipur.

BOQ

Name of Work:- Provision of HT cable for additional power supply from different source from CSPDCL at S.V. Airport Raipur.
Sl. No. Item Description
1SUPPLY OF HT CABLE
2Supply of 33kV ( UE) 3Core 300sqmm Stranded Class-2 compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, XLPE Insulated, Insulation Screening with extruded Semi Conducting Compound in combination with Copper tape Core laid up, inner and outer sheath of FRLS PVC, galvanised flat steel strip armoured and overall PVC Sheathed Cable Conforming to IS 7098/ ( PART-II) 1985 with latest amendments.3C X 300Sqmm UE CableFrom Service block to Switch Yard Total Length = 390Mtr.From RMU Unit to NATS Power House HT Panel = 565 Mtr.
3END TERMINATION & JOINTING
4Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3C X 300Sqmm HT, XLPE UE Cable aluminium conductor cable of 33 KV grade as required :
5Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3C X 300Sqmm , HT, XLPE UE aluminium conductor cable of 33 KV grade as required .
6Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for 3Cx 300Sqmm.HT, XLPE aluminium conductor cable of 33 KV grade as required.
7LAYING OF HT CABLE
8Laying of one number XLPE power cable of 33 KV grade of following size direct in ground including excavation not less than 1.2 mtr and by providing sand cushioning & protective bricks covering and refilling the trench etc as per AAI technical specifications complete as per site requirement.
9Above 120 sq. mm and upto 400 sq. mm
10Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 33 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
11Above 120 sq. mm and upto 400 sq. mm
12Laying of one number XLPE power cable of 33 KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required.
13Above 120 sq. mm and upto 400 sq. mm
14Laying of one number XLPE power cable of 33 KV grade of following size in the existing masonry open duct as required.
15Above 120 sq. mm and upto 400 sq. mm
16Demolishing cement concrete road PCC/RCC by Kerf Cutiing and Breaking ( trench size W= 0.6 Mtr X D=0.3Mtr. manually or by mechanical means including disposal of material within 50 metres lead as per direction of EIC.
17Providing, laying and fixing 250mm dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (80 cm deep) and refilling etc as required.
18Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation of pump, DG set, road etc including form work etc as required.
19Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set Road etc including form work etc as required
20Supply & Laying of HDPE Pipe of size 200mm OD PE-80 PN-6 as per IS 4984 of wall thikness not less than 11.4mm complete with HDD trenchless method direct in ground in all type soil including 4 mm PP rope coupling of pipe, etc, complete (1.5 to 3 mtr. Below in normal roads and rumway and taxiway) in all respect as per specification. ( cost of HDPE Pipe joint is included in the item)
21Providing, laying and fixing 150mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including Core cutting and maiking Good of existing RCC LT Cable trench for crossing the cable etc as required
22Constructing masonry Chamber for HT cables size 1 Mtr x1 Mtr x1.20 Mtr inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) and 100 mm RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, 150mm foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
23Supplying and fixing HT cable route marker with 10 cm X 10 cm X 5 mm thick MS plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
24Dismantling and removal of existing 3C x 33 kV UE HT XLPE cable laid underground, including excavation by mechanical means, removal of sand cushioning and protective brick covering, taking out/removing the HT cable from trench, and refilling/restoration of the trench after removal. shifting of removed HT Cable upto the proposed cable trench complete, etc., as required and as directed by Engineer-in-Charge (EIC)
25Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56853433
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 92.45 Lakhs
LAST DATE 27-08-2026
Authority
Authority Name Airports Authority Of India
Work Description Tender for Provision Of Ht Cable For Additional Power Supply From Different Source From Cspdcl At S.V. Airport Raipur.
Basic Detail
Tender No AAI/ER/RPR/CW/2026-27/E-NIT- 03
Bidding Type Tender
Location
City Raipur
State Chhattisgarh
Key Dates
Publish Date 05 Aug 2026
Submission Date 27 Aug 2026
Open Date 28 Aug 2026
Finance
Tender Value 92.45 Lakhs
Tender Fee 1180
EMD 2.77 Lakhs
Exemption Not Available
Document List
1dc7988f-069a-47b3-b8b8-3d21fed646ed.html
BOQ_334500.xls
TenderDocumentHTPowerCable.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Aug 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
html

1dc7988f-069a-47b3-b8b8-3d21fed646ed.html

xls

BOQ_334500.xls

pdf

TenderDocumentHTPowerCable.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders