Tender For Periodical Services To Internal And External Surface Of Bldgs, Repairs To Internal And External Plaster Of Bldgs, Common Area, Staircase And Other Misc Works At Nchc Powai (Zone A & C) Under Ge (Nw) Bhandup
Tender Value
35.95 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
8 days left
EMD
71900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Internal And External Surface Of Bldgs, Repairs To Internal And External Plaster Of Bldgs, Common Area, Staircase And Other Misc Works At Nchc Powai (Zone A & C) Under Ge (Nw) Bhandup
BOQ
| Sl. No. | Item Description |
| 1 | M & L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying with roller one coat of oil bound distemper complete all as specified and directed. |
| 2 | M & L for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing scrapping down smoke, soot ,moulds, moss and efflorecent salts and treating oil and gresy spots and thereafter applying one coat of oil bound distemper with roller complete all as specified and directed. |
| 3 | M & L for complete removal of existing treatment of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying with roller two coat of oil bound distemper including application of wall care putty for smooth finish etc complete all as specified and directed. |
| 4 | M & L white cement based wall care putty as required on wall / ceiling new or old surfaces of any description finished even and smooth complete all as specified and directed. |
| 5 | M & L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing scrapping down smoke, soot, moulds, moss and efflorecent salts and treating oil and greasy spots and thereafter applying one coat of plastic emulsion painting with roller complete all as specified and directed |
| 6 | Material & Labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new / old surfaces complete all as specified and directed.Note:- The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE. Make :Asian / Berger or techno commercial or techno commercial equivalent as approved by GE. |
| 7 | M & L preparation of old painted wooden surfaces of any desription, not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 8 | M & L preparation of old painted steel surfaces of any desription, not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 9 | Taking down cement or cement lime mortar plaster, any description on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 10 | M & L for ready mix plaster 10 mm thick on internal faces of bricks or concrete surface including including preparation of wall surfaces etc complete all as specified and directed. |
| 11 | M & L for rendering 5 mm thick in ready mix plaster on ceiling surface and finishing the surfaces even and smooth without using extra cement including scrapping down and preparation of ceiling surfaces to receive plaster, scaffolding as required etc, complete all as specified and directed. |
| 12 | M & L for ready mix polymer modified cement based plaster 20 mm thick on new external bricks or concrete surface including preparation of wall surfaces etc complete all as specified and directed. |
| 13 | M & L for providing of waterproofing coating work to external exposed surfaces of wall with Dr Fixit raincoat star waterproofing coating with cleaning, washing and saturation of surface with water and applying one coat of Dr Fixit Primeseal, let it dry for 4 hours after that apply 2 coats of Dr Fixit Raincoat Star alongwith filling of external cracks up to 5 mm with Dr Fixit Crack-X Paste including erecting and dismantling of scaffolding complete all as specified and directed by Engineer-in-Charge. |
| 14 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over coat of alkali resistant primer with roller etc complete all as specified and directed. |
| 15 | M & L for preparation new plastered surfaces of ceiling and applying two coats of distemper over a coat of primer compelte all as specified and directed by Engineer-in-Charge. |
| 16 | M & L writing letters or figures (Black, roman, Italic, or Indian ) not exceeding 30 cm high with thick paint so they are stand out boldly without showing signs of brush marks complete all as specified and directed. |
| 17 | M & L for preparation of existing treatment of walls and applying one coat of cement based paint complete all as specified and directed. |
| 18 | M & L for injecting chemical GLYPHOSPHATE (4 % concentration) of 20 ml or till refusal by making cut / injection in the stem of plant of roots at 30 mm and spraying with solution 25 ml GLYPHOSPHATE (4 % concentration diluted with ltr of water) and removing the plant / vegetation including penetrated roots complete including necessary scaffolding etc for plants / vegetation complete all as specified and directed. |
| 19 | Dismantling of roof terracing cement / brick concrete (un-reinforced) and existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material out of MD land complete all as specified and directed. |
| 20 | M & L for PCC (1:2:4) type B0 using 12.5 mm graded aggregate with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc complete all as specified and directed.Note: Water proofing compound will be measured & paid seperately. |
| 21 | M & L for 10 mm thick cement plaster in CM (1:3) using water proofing compound @ 2% by weight of cement complete all as specified and directed BY Engineer-in-charge. Note : Waterproofing compound will be measured and paid seperately |
| 22 | Supply only integral water proofing compound complete all as specified and directed by EIC. |
| 23 | M & L for application of 7 layer of waterproofing system on leaking roof by thorough surface preparation, opening and filling of cracks, application of absorption coat of Thermacool WP51, application of sandwich coat of elastomeric (Thermacool WP51 + Cement) waterproofing layer with 80 gsm non woven fibre mesh, application of 3rd coat of elastomeric (Thermacool WP51 + Cement) waterproofing layer and top coated with two coats of Thermacool 0.3c elastomeric, waterproofing solar IR heat reflective coating having a minimum service life of 10 years complete all as specified and directed. |
| 24 | Supply and Application of 4 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete wall surface by thorough surface preparation with high pressure water jet minimum 125 bars, opening the cracks, followed by one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and minimum 50% solids, filling and sealing the cracks, then over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coat having + 450% Elongation followed by curing and then top-coated with 1 protective coat of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with pull off adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 sqm / Ltr / 2 Coats, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable. The product should be certified by NABL Approved lab and application is to be done by company approved applicator only and should have a service life of 5 years and be applied as per manufacture's instructions complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender