Tender For Repair And Maintenance Work In Various Academic Buildings And Departments In Tripura University C Us Surjyamaninagar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
20916
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Work In Various Academic Buildings And Departments In Tripura University C Us Surjyamaninagar
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing white vitreous china laboratorysink with C.I. brackets, C.P. brass chain with rubberplug 40mm C.P brass waste and 40mm C.P. brass trapwith necessary C.P. brass unions complete includingpainting of fittings and brackets, cutting and makinggood the wall wherever required :18.11.2 Size 600x450x200mm |
| 2 | 19.7 Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, havingthermal stabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsincludingfixingthepipewithclampsat 1.00mspacing. This includes jointingofpipes&fittingswithonestepCPVC solvent cementand testingof joints complete asper directionofEngineer in Charge. Internal work - Exposed on wall19.7.3 25 mm nominal outer dia .Pipes. |
| 3 | 19.50 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards andweighing not less than 810 gms.19.50.1 15 mm nominal bore |
| 4 | 11.55 Providing and fixing on wall face unplasticisedRigid PVC rain water pipes (working pressure 4kg/cm2) conforming to IS : 13592TypeA includingjointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion etc.complete as per direction of Engineer-in-charge :11.55.1 Single socketed pipe - 75 mm OD |
| 5 | 13.30 Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting thepatch in proper shape and preparing and plastering thesurface of the walls complete including disposal ofrubbish to the dumping ground with all leads and liftsincluding finishing even and smooth and curingcomplete as per direction of the Engineer in charge:13.30.1 With cement mortar 1:3 ( 1 cement : 3 fine sand ). |
| 6 | 13.16 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:13.16.1 Float glass panes of thickness 4 mm |
| 7 | 12.35 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved brand and manufacture to give an even shade [Payment shall be made after submission of TestCertificate issued by the Manufacturer] :12.35.1 New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 8 | 13.33 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth includingnecessary repairs to scratches etc. complete |
| 9 | 10.42 Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% andconforming to IS: 15622- 2017, of approved make, in allcolours and shades, laid over 20mm thick cement mortar1:4 (1 cement : 4 fine sand), jointing with grey cementslurry @ 3.3 kg/ sqm including grouting the joints withwhite cement and matching pigments etc. all complete asper direction of the Engineer-in-charge..10.42.1 Soluble Salt Stainfree vitrified tiles (Glossy)10.42.1.1 Size of tile 600 mm x 600 mm |
| 10 | providing and fixing in position collapsible steel shutterswith vertical channels 20x10x2mm at 100 mm centre tocentre and braced with flat iron diagonals 20x5mm sizewith top and bottom rail of T-iron 40x40x6mm with40mm dia. steel pulleys & with riveted bolts, nuts,locking arrangement, stoppers, handles, hold fast/anchor bolt including embedding in cement concrete ofrequired grade for fixing in position, all necessaryfittings, including applying a priming coat of approvedsteel primer etc. complete as required. |
| 11 | Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sectionsand other sections of approved make conforming toIS: 733 and IS : 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up ofgaps at junctions, i.e. at top, bottom and sides withrequired EPDM rubber/neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred andjointed mechanically wherever required including cleatangle, aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete |
| 12 | 16.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and makingprovision for fixing fittings wherever required includingthe cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately ): 16.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodiccoating of grade AC 15). |
| 13 | 16.3 Providing and fixing glazing of approved quality inaluminium doors, windows, ventilator, shutters andpartition etc. with EPDM rubber / neoprene gasket etc.complete as per architectural drawing and the directionof Engineer-in-charge (Cost of snap beading shall be paidin basic item) : 16.3.1 With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 14 | 19.48 Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 markedwith cover and suitable locking arrangement andmaking necessary holes for inlet, outlet and overflowpipes but without fittings and the base support fortank |
| 15 | 18.27 Providing and fixing white vitreous china laboratory sink including making all connections excluding cost offittings:18.27.2 Size 600x450x200 mm |
| 16 | 9.22 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and makingcurvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete,including fixing the railing with necessary accessories &stainless steel dash fasteners , stainless steel bolts etc., ofrequired size, on the top of the floor or the side of waistslab with suitable arrangement as per approval ofEngineer-in-charge, (for payment purpose only weight ofstainless steel members shall be considered excludingfixing accessories such as nuts, bolts, fasteners etc.). |
| 17 | 6.1 First class brick work in foundation and plinthincluding cost of all materials as required complete:6.1.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 18 | 12.1 12 mm cement plaster of mix12.1.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 19 | 12.10 Neat cement punning. |
| 20 | 5.1 Providing and laying in position specified grade ofreinforced cement concrete excluding the cost ofcentring, shuttering, finishing and reinforcement--All work upto plinth level: 5.1.1 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size) |
| 21 | 5.19 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D ormore |
| 22 | SUPPLYING OF 04 NOS DOZING PUMPS IN PUMP HOUSE MARKET RATE |
| 23 | Providing corrugated G.S. sheet roofing includingvertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of Engineer-in-charge.0.63mm thick with zinc coating not less than 275gm/m2 |
| 24 | 19.27 Providing and laying S&S centrifugally cast (spun)iron pipes (Class LA) conforming to IS - 153619.27.3 150 mm dia. Pipe |
| 25 | 12.9 6 mm cement plaster of mix : 12.9.1 Cement mortar 1:3 (1 cement : 3 fine sand) |
| 26 | 12.59 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: 12.59.1 Two or more coats on new work |
| 27 | 18.20 Providing and fixing solid plastic seat with lid forpedestal type W.C. pan complete : 18.20.1 White solid plastic seat with lid |
| 28 | 8.82 Providing and fixing IS : 3564 marked aluminiumextruded section body tubular type universalhydraulic door closer with double speed adjustmentwith necessary accessories and screws etc. complete. |
| 29 | Providing and fixing of hand spray |
| 30 | 8.44 Providing and fixing curtain rods of 1.25 mm thickchromium plated brass plate, with two chromiumplated brass brackets fixed with C.P. brass screws andwooden plugs, etc., wherever necessary complete :8.44.1 12 mm dia. |
| 31 | 12.19 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 32 | MISCELLENEOUS WORKS LIKE CARRIAGE OF MATERIALS TO 3RD FLOOR AND CLEANING OF SITE AFTER WORKS ETC TO GIVE A GOOD FINISHING LOOK AS PER SITE CONDITION |
| 33 | 17.14 Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with : 17.14.1 Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 34 | 19.7 Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, havingthermal stabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsincludingfixingthepipewithclampsat 1.00mspacing. This includes jointingofpipes&fittingswithonestepCPVC solvent cementand testingof joints complete asper directionofEngineer in Charge. Internal work - Exposed on wall19.7.5 40 mm nominal outer dia .Pipes. |
| 35 | 18.18 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixturescomplete. 18.18.1 10 litre capacity-White |
| 36 | 18.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.18.28.1 Semi rigid pipe18.28.1.1 32 mm dia |
| 37 | 19.7 Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, havingthermal stabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsincludingfixingthepipewithclampsat 1.00mspacing. This includes jointingofpipes&fittingswithonestepCPVC solvent cementand testingof joints complete asper directionofEngineer in Charge. Internal work - Exposed on wall 15 mm nominal outer dia .Pipes |
| 38 | 13.8 Providing & fixing White vitreous china water closetsquatting pan (Indian type) along with \\"S\\" or \\"P\\" trapincluding dismantling of old WC seat and \\"S\\" or \\"P\\" trapat site complete with all operations including allnecessary materials, labour and disposal of dismantledmaterial including malba, all complete as per thedirection of Engineer-in charge. 13.8.1 Long pattern W.C Pan of size 580x440 mm |
| 39 | 14.20 Dismantling tile work in floors and roofs laid incement mortar including stacking material within 50metres lead.15.20.1 For thickness of tiles 10 mm to 25 mm |
| 40 | 8.4 Providing wood work in frames of false ceiling,partitions etc. sawn and put up in position 8.4.3 Local Teak Wood |
| 41 | 8.19 Providing and fixing ISI marked flush door shuttersconforming to IS: 2202 (Part I) non-decorative type,core of block board construction with frame of 1stclass hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and faceveeners on both faces of shutters. 8.19.1 35 mm thick including ISI marked Stainless Steel but hinges with necessary screws. |
| 42 | Providing and fixing white vitreous china wash basinincluding making all connections but excluding the costof fittings: 18.25.1 Flat back wash basin of size 630x450mm. |
| 43 | 8.115 Providing and fixing to existing door frames.8.115.1 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/plastic brackets of size 75×220 mm having wallthickness 1.0 mm and stainless steel screws. The stylesof the shutter reinforced by inserying galvanised MStube of size 20×20 mm and 1 mm ± 0.1 mm wallthickness. The lock rail made up of \\"H\\" Section, a UPVChollow section of size 100×24 mm and 2 mm ± 0.2 mmwall thickness fixed to the shutter styles by means ofplastic /galvanised MS \\"U\\" cleats. The shutter framefilled with a UPVC multi-chambered single panel of sizenot less than 620 mm, having overall thickness of 20mm and 1 mm ± 0.1 mm wall thickness. The panelsfilled vertically and tie bar at two places by insertinghorizontaly 6 mm galvanised MS rod and fastened withnuts and washers, complete as per manufacturer'sspecification and direction of En |
| 44 | 8.114 Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overalldimension, as below (tolerance +/- 1mm) with wallthickness 2.0mm+/- 02mm. corners of the door frameto be jointed with galvanized brackets and stainlessscrews, joint mitred and plastic wilded. The hinge sidevertical of the frames reinforced by galvanized MStube of size 19 × 19 mm and 1 mm +/- 0.1 mm wallthickness and 3 nos stainless steel hinges fixed to theframe complete as per manufacturers specificationand direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender