Tender For Providing Market Rate For Non Csr Electrical Item For Electrical Work Under Talegaon Dabhade Municipal Council .

Sharing tender

Tender for Providing Market Rate For Non Csr Electrical Item For Electrical Work Under Talegaon Dabhade Municipal Council . , Supply And Erection Of Decorative Ornamental Combo Pole 6 Meter Long, Cast Iron Combo Pole Made Out Of Cast Iron/Aluminum And Ms Class Material Pole Bottom Section: 1.20 Meter Long, Made As Under:- Octagonal Shaped Cast Iron Casting At Base Having The Following Dimensionslength 250Mm, Bottom Diameter 170Mm, Inner Diameter 140Mm Outer Diameter For Ms Grooved Pipe 140Mm, Length 650Mm Long. Having A Built In Junction Box With Mcb And Connector Decorative Aluminum Ornamental Pot Shaped Die Casting Length 350Mm Long.Mounting Base Plate 250 X 250 X 12 Mm, Along With Slots 19X40mm For Foundation Bolts Middle Section: 2.80 Meter Long, Made As Under.- Spiral Grooved Pipe Having Outer Diameter Out Of 90Mm, Length 2.80 Meter Long. Along With Single Decorative Dotted Aluminum Casting Ring At The Center Of The Spiral Grooved Pipe Inner Diameter 90Mm, Outer Diameter 110Mm, Height 48Mm Of The Ring. With 1 Nos Of Grooved Aluminum Embellishment Casting At The Top Of Spiral Grooved Pipe, Inner Diameter 76Mm, Outer Diameter 155Mm, Length 180Mm Long Top Section:: 2.00 Meter Long, Made As Under:- Made Out Od 76.1 Mm Od Pipe 2.00 Meter Long Along With Decorative Ms Sheet Metal Arrow Shaped Dome At The Top Of The Pole. The Poles Surface Will Be Cleaned To Removes Any Oil Deposits And Will Be Sand Basted, Post That The Pole Will Get 2 Coats Of Epoxy Primer And Then The Pole Will Be Painted With Polyurethane Paint Antique Finish And A Single Coat Of Lacquer Pu Coating. ( Refer Diagram No 1) , Supply And Erection Of Decorative Pole 7 Meter Meter Long, Of Gi/Ci/ Aluminum And Ms Class Material Pole Bottom Of 250-300Mm And Top 50-100Mm With Deep Vertical Lining/ Spiral Lining From Bottom To Top Equally Tapperd/Conical Or Frustam Of Cone The Poles Surface Will Be Cleaned To Removes Any Oil Deposits And Will Be Sand Basted, Post That The Pole Will Get 2 Coats Of Epoxy Primer And Then The Pole Will Be Painted With Polyurethane Paint Antique Finish And A Single Coat Of Lacquer Pu Coating. , Supply And Erection Of Decorative Pole 8 Meter Meter Long, Of Gi/Ci/ Aluminum And Ms Class Material Pole Bottom Of 250-300Mm And Top 50-100Mm With Deep Vertical Lining/ Spiral Lining From Bottom To Top Equally Tapperd/Conical Or Frustam Of Cone The Poles Surface Will Be Cleaned To Removes Any Oil Deposits And Will Be Sand Basted, Post That The Pole Will Get 2 Coats Of Epoxy Primer And Then The Pole Will Be Painted With Polyurethane Paint Antique Finish And A Single Coat Of Lacquer Pu Coating. , Decorative Single Arım Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. The Bracket Arm Is Made Out Of 50-75Mm Od Pipe For Vertical And 27-50Mm Horizonal Running The Cable Through The Bracket And Will Have The Required Reducer To Mount Hanging Led Fixture The Surface Of The Bracket Will Be Cleaned To Removes Any Oil Deposits And Will Have The Required Reducer To Mount Hanging Led Fixturethe Surface Of The Bracket Will Be Cleaned To Removes Any Oil Deposits And Will Be Sand Basted, Post That The Bracket Will Get 2 Coats Of Epoxy Primer And Then The Bracket Will Be Painted With Polyurethane Paint Antique Finish And A Single Coat Of Lacquer Pu Coating ( Suitable For 7/8 Mtr Pole As Shown In Diagram ) , Decorative Double Arım Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. The Bracket Arm Is Made Out Of 50-75Mm Od Pipe For Vertical And 27-50Mm Horizonal Running The Cable Through The Bracket And Will Have The Required Reducer To Mount Hanging Led Fixture The Surface Of The Bracket Will Be Cleaned To Removes Any Oil Deposits And Will Have The Required Reducer To Mount Hanging Led Fixturethe Surface Of The Bracket Will Be Cleaned To Removes Any Oil Deposits And Will Be Sand Basted, Post That The Bracket Will Get 2 Coats Of Epoxy Primer And Then The Bracket Will Be Painted With Polyurethane Paint Antique Finish And A Single Coat Of Lacquer Pu Coating ( Suitable For 7/8 Mtr Pole As Shown In Diagram ) , Decorative Single Arım Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. The Bracket Arm Is Made Out Of 27 Mm Od Pipe For Running The Cable Through The Bracket And Will Have The Required Reducer To Mount Hanging Led Fixture The Surface Of The Bracket Will Be Cleaned To Removes Any Oil Deposits And Will Have The Required Reducer To Mount Hanging Led Fixturethe Surface Of The Bracket Will Be Cleaned To Removes Any Oil Deposits And Will Be Sand Basted, Post That The Bracket Will Get 2 Coats Of Epoxy Primer And Then The Bracket Will Be Painted With Polyurethane Paint Antique Finish And A Single Coat Of Lacquer Pu Coating ( Suitable For 6 Mtr Pole As Shown In 6 Mtr Pole Diagram No. 1) , Decorative Double Arım Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. The Bracket Arm Is Made Out Of 27 Mm Od Pipe For Running The Cable Through The Bracket And Will Have The Required Reducer To Mount Hanging Led Fixture The Surface Of The Bracket Will Be Cleaned To Removes Any Oil Deposits And Will Have The Required Reducer To Mount Hanging Led Fixturethe Surface Of The Bracket Will Be Cleaned To Removes Any Oil Deposits And Will Be Sand Basted, Post That The Bracket Will Get 2 Coats Of Epoxy Primer And Then The Bracket Will Be Painted With Polyurethane Paint Antique Finish And A Single Coat Of Lacquer Pu Coating ( Suitable For 6 Mtr Pole As Shown In 6 Mtr Pole Diagram No. 1) , 60W Bell Shape Hanging Led Suitable For Pole Bracket With 3 Years Warranty , 9 Meter Long Decorative Street Light Pole Supply And Erection Of Decorative Cast Iron Combo Pole Made Out Of Cast Iron/Aluminium And Ms Class Material Pole (Bottom Ms Conical Section 3000Mm Long. Diameter Of The Bottom Section 220Mm X Top 90Mm, Along With 90Mm Fluted Ms Pipe-6000Mm Long). Ms Grade Is 1161 Pole Made Out Of Conical Section And Od Of 90Mm Fluted Pipe And Of Total Height 9.00 Meter Above The Foundation With Arrangement For Suitable Bracket Of 1200Mm Single/Double Arm Bracket. Or Double Bracket Fitting Suitable At Different Height Of Pole. Pole Will Have A Casting Embellishment At 3 Meter & I No Ring Casting On Fluted Pipe. Base Plate Size 400X400x16mm Pcd Of The Pole Is 320Mm A/F. Suitable Earthing Arrangement Is Provided. The Pole Is Provided With Foundation Bolt Set M20*600Mm Long (4 Bolts+ Nuts). The Decorative Pole Shall Be Duly Pre- Treated Externally So That Rusting Should Not Happened. On The Edges And Openings The Pole Is Duly Painted By One Coat Of Epoxy Zinc Primer To Avoid The Corrosion. The Pole Should Be Painted With Polyurethane Paint Of Approved Colour Finish.Each And Every Cast Piece Is Shot Blasting To Remove All Its External Dirt And Residues Etc. Castings Are Given An Extensive Treatment With Epoxy Based Primer And Paint Prescribed For Such Surfaces To Make It Absolutely Rust And Corrosion Proof, As Well As Giving It A Pleasing Appearance Through Antique Finish And Colour As Per The Approval Of Engineer In Charge. Minimum Dft Level Is 60 Microns. Including Junction Box Consisting Of Mcb, Bakelite Sheet And Connecter. (Details Of The Specification As Per The Attached Drawing.) , 8 Meter Long Decorative Street Light Pole Supply And Erection Of Decorative Cast Iron Combo Pole Made Out Of Cast Iron/Aluminium And Ms Class Material Pole (Bottom Ms Conical Section 2000Mm Long. Diameter Of The Bottom Section 220Mm X Top 90Mm, Along With 90Mm Fluted Ms Pipe-6000Mm Long). Ms Grade Is 1161 Pole Made Out Of Conical Section And Od Of 90Mm Fluted Pipe And Of Total Height 8.00 Meter Above The Foundation With Arrangement For Suitable Bracket Of 1000Mm Single/Double Arm Bracket. Or Double Bracket Fitting Suitable At Different Height Of Pole. Pole Will Have A Casting Embellishment At 3 Meter & Casting On Fluted Pipe. Base Plate Size 400X400x16mm Pcd Of The Pole Is 320Mm A/F. Suitable Earthing Arrangement Is Provided. The Pole Is Provided With Foundation Bolt Set M20*600Mm Long (4 Bolts+ Nuts). The Decorative Pole Shall Be Duly Pre- Treated Externally So That Rusting Should Not Happened. On The Edges And Openings The Pole Is Duly Painted By One Coat Of Epoxy Zinc Primer To Avoid The Corrosion. The Pole Should Be Painted With Polyurethane Paint Of Approved Colour Finish.Each And Every Cast Piece Is Shot Blasting To Remove All Its External Dirt And Residues Etc. Castings Are Given An Extensive Treatment With Epoxy Based Primer And Paint Prescribed For Such Surfaces To Make It Absolutely Rust And Corrosion Proof, As Well As Giving It A Pleasing Appearance Through Antique Finish And Colour As Per The Approval Of Engineer In Charge. Minimum Dft Level Is 60 Microns. Including Junction Box Consisting Of Mcb, Bakelite Sheet And Connecter. (Details Of The Specification As Per The Attached Drawing.) , Decorative Single Arm Bracket 1200 Mm Nominal Length, Made Out Of 48.3 Mm Diameter Steel Pipe, Cast Iron & Cast Aluminium Embellishment. Bracket Should Have Embellishment As Approved By Engineer In Charge. Bracket Should Also Have Suitable Mounting Arrangement Suitable For Street Light Type Led 100 Watt Led Street Light Fitting Complete Nuts & Bolts Arrangement As Required. Entire Unit Shall Be Given An Extensive Three Stage Treatment With Pu Based Etch Primer, Zinc Phosphate Primer And Poly Urethane Paint Of Approved Colour & Prescribed For Such Surfaces To Make It Absolutely Rust And Corrosion Proof, As Well As Giving It A Pleasing Appearance. , Decorative Double Arm Bracket 1200 Mm Nominal Length, Made Out Of 48.3 Mm Diameter Steel Pipe, Cast Iron & Cast Aluminium Embellishment. Bracket Should Have Embellishment As Approved By Engineer In Charge. Bracket Should Also Have Suitable Mounting Arrangement Suitable For Street Light Type Led Upto 120 Watt Led / Hanging Led Complete Nuts & Bolts Arrangement As Required. Entire Unit Shall Be Given An Extensive Three Stage Treatment With Pu Based Etch Primer, Zinc Phosphate Primer And Poly Urethane Paint Of Approved Colour & Prescribed For Such Surfaces To Make It Absolutely Rust And Corrosion Proof, As Well As Giving It A Pleasing Appearance. , 100 Watt- 120Watt Bell Shape Hanging Led With 3 Years Warranty , Supply And Erection Of Decorative Cast Iron Combo Pole Made Out Of Cast Iron/Aluminium And Ms Class Material Pole Wider Bottom Narrowing To Top (Bottom Ms Conical Section 3000Mm Long. Diameter Of The Bottom Section 220Mm X Top 90Mm, Along With 90Mm Fluted Ms Pipe-6000Mm Long). Ms Grade Is 1161 Pole Made Out Of Conical Section And Od Of 90Mm And Of Total Height 9.00 Meter Above The Foundation With Arrangement For Suitable Bracket Of 1200Mm Single/Double Arm Bracket. Or Double Bracket Fitting Suitable At Different Height Of Pole. Pole Will Have A Casting Embellishment At 6 Meter & Casting On Fluted Pipe (For 2 Mtr Top). Base Plate Size 400X400x16mm Pcd Of The Pole Is 320Mm A/F. Suitable Earthing Arrangement Is Provided. The Pole Is Provided With Foundation Bolt Set M20*600Mm Long (4 Bolts+ Nuts) , Lamp Post Type Pole Upto 5 Mtr With Complete Led Fitting ( Refer Drawing No 9) , Lamp Post Type Pole Upto 5 Mtr With Pc Tube Complete Led Fitting ( Refer Drawing No 10) , Supply And Erection Of 5 Mtr Decorative Cast Iron Combo Pole Made Out Of Cast Iron/Aluminium And Ms Class Material Pole For Theame Based Pole For Garden,Open Space Like Yoga, Butterfly Sculpture On Pole Or Any Other Design As Per Incharge. The Pole Having Base Plate 175Mm*175 A=Height 450Mm To 750Mm, Tubular Structure Above 80Mm To 110 Mm, And Dia Of Ground 200Mm To 300Mm , Supply And Erection Of 3 Mtr Decorative Cast Iron Combo Pole Made Out Of Cast Iron/Aluminium And Ms Class Material Pole For Theame Based Pole For Garden,Open Space Like Yoga, Butterfly Sculpture On Pole Or Any Other Design As Per Incharge. The Pole Having Base Plate 175Mm*175 A=Height 450Mm To 750Mm, Tubular Structure Above 80Mm To 110 Mm, And Dia Of Ground 200Mm To 300Mm , Decorative Single Arım Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. Suitable For Item No 17/18, 5Mtr/3Mtr Pole , Decorative Double Arım Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. Suitable For For Item No 17/185Mtr/3Mtr Pole , Speaker Arrangement For Pole With Necessary Mounting Arrangement, Cable And Neccesary Accessories. 30-40 W Rms 40/20/10/5W 160-16000Hz 88 Db. Pa Garden Speaker, Ip -65 , Ornamental Decorative Curved Single Arm Bracket 1200/1500 Mm Nominal Height Made Out Of 48.32 Mmdia Steel Pipe, Cast Aluminium Embellishment Having C Shaped Or Cresent Decorative Structre ,Blue Artistic annual rate contract Bracket Should Have Embeilishmenr As Approved By Engineer Ln Charge. Suitable For7 Mtr To 9Mtr Pole. Bracket Should Also Have Suitable Mounting Arrangement Suitable For Decorative 40 To 90 Watt Led Street Light Fitting Complete Nut&Bolts Arrangenment As Required. Entire Unit Shall Be Given An Extensive Three Stage Treatment With Pu Based Etch Primer, Zinc Phosphate Primer And Poly Urethane Paint Of Approved Color & Prescribed For Such Surfaces To Make It Absolutely Rust And Corrosion Proof,As Well As Giving It A Pleasing Appearance , Ornamental Decorative Curved Double Arm Bracket 1200/1500 Mm Nominal Height Made Out Of 48.32 Mmdia Steel Pipe, Cast Aluminium Embellishment Having C Shaped Or Cresent Decorative Structre ,Blue Artistic annual rate contract Bracket Should Have Embeilishmenr As Approved By Engineer Ln Charge. Suitable For7 Mtr To 9Mtr Pole. Bracket Should Also Have Suitable Mounting Arrangement Suitable For Decorative 40 To 90 Watt Led Street Light Fitting Complete Nut&Bolts Arrangenment As Required. Entire Unit Shall Be Given An Extensive Three Stage Treatment With Pu Based Etch Primer, Zinc Phosphate Primer And Poly Urethane Paint Of Approved Color & Prescribed For Such Surfaces To Make It Absolutely Rust And Corrosion Proof,As Well As Giving It A Pleasing Appearance , Technical Specifications:- Supply, Installation, Testing & Commissioning Of 4-Meter-Long Leaf Type Double Arm Ornate Galvanized Iron Layer Light Pole With Speaker Having An Additional Arm At 3.5 Meter From Ground Level To Highlight The Footpath Area. Its Outer Diameter Measures 90 Millimetres That Has Fluted Grooves Throughout The Surface Of The Pipe That Creating A Visually Pleasing Silhouette. The Pole Has A Cnc Profile Sheet Along The Surface That Not Only Creates An Elevated Visual Appeal But Also Gives It More Strength That Has Been Achieved With Utmost Precision Through Cnc Machining. The Walls Of The Pole Exhibit A Thickness Of 3.00 Millimetres, Ensuring Both Durability And Aesthetic Balance. The Pole Comes With 2 Nos. Of Cnc Machined Mild Steel Box Embodies The Organic Elegance Of A Leaf Shape, Providing A Unique And Aesthetically Pleasing Mounting Solution For Led Light Fittings. The Pole Is Anchored By A Sturdy Ms Base Plate Measuring 250 X 250 Millimetres, With A Thickness Of 12 Millimetres. The Material For The Base Plate Is Steel Of Grade E250 To Is 2062; 2011. The Pole Will Have A Window Cut Out At The Bottom For A Built-In Junction Box To Mount A Connector And 6A Mcb. This Architecturally Designed Pole Is Structurally Sound And Wind Speed Considered In Design 50M/S, Is 875: Part- 3:1987, Material Of The Steel Tubes Is Yst210. The Pole Undergoes A Meticulous Painting Process, Enveloping It In A Lustrous Coat Of Highly Durable Green Leafy Polyurethane Paint. Double Arm Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. Double Arm Pole - 1 Nos. Along With Erecting Of Integrated Led Street Light Fitting 40 To 50W Ip65 & Ik08 Class Having Single Piece Pressure Die-Cast Aluminium Housing, Having System Lumens Output Of Min. 4400 Lumens, Min. Efficacy Of 110 Lumen/W, Cri70, Cct Upto 6500K, Thd0.95, Operating Range Of 140 270V, Inbuilt Surge Protection Of 10 Kv, Life Class Of 50,000 Hrs. At L70b50, Including Driver Complete With 3 Years Warranty. - 2 Nos. Microprocessor Based Dimmable Electronic Circuit Unit Suitable For 40 W Led Street Light Which Having Fix Type Dimming Circuit For 50 % Of 40 W I.E. 20 W After 5 Hrs From The Initial Operating Time. - 2 Nos. Making Suitable M- 20 Grade Reinforced Cement Concrete Foundation By Considering The Safe Soil Bearing Capacity At Site As 10 T/Sq.M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete. - 1 Nos. Spmcb 0.5A To 5A, C-Series With Rated Short - Circuit Breaking Capacity (Icn) 10Ka In Provided Distribution Board - 2 Nos. Pvc Insulated Pvc Round Sheathed 1.5 Sq.Mm (30 No. X 0.25 Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv - 10 Mtr. Laying Of Fr Xlpe Insulated, Galvanised Steel Formed Wire Armoured (Strip) Cable 1100 V, 4 Core 6 Sq. Mm. Aluminium Conductor Complete Erected With Glands & Lugs, On Wall/ Trusses/Pole Or Laid In Provided Trench/ Pipe. - 14 Mtr. Supplying And Laying (Including Excavation Of Suitable Width & Depth Up To 90 Cm) 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) Of Hdpe For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete. - 10 Mtr. Providing Pipe Type Earthing With 40Mm. Dia. G.I. Pipe Or 20 Mm Dia. G.I. Rod Complete With All Materials Testing And Recording The Results. - 1 Nos. With Pole Mounting 30-40 W Rms 40/20/10/5W 160-16000Hz 88 Db. Pa Garden Speaker, Ip -65 And Allied Accessories Like Amplifier, Mixer, Required Armoured Cable And Dwc Pipe Etc. , Technical Specifications:- Supply, Installation, Testing & Commissioning Of 5-Meter-Long Leaf Type Double Arm Ornate Galvanized Iron With Speaker Layer Light Pole Having An Additional Arm At 4.5 Meter From Ground Level To Highlight The Footpath Area. Its Outer Diameter Measures 90 Millimetres That Has Fluted Grooves Throughout The Surface Of The Pipe That Creating A Visually Pleasing Silhouette. The Pole Has A Cnc Profile Sheet Along The Surface That Not Only Creates An Elevated Visual Appeal But Also Gives It More Strength That Has Been Achieved With Utmost Precision Through Cnc Machining. The Walls Of The Pole Exhibit A Thickness Of 3.00 Millimetres, Ensuring Both Durability And Aesthetic Balance. The Pole Comes With 2 Nos. Of Cnc Machined Mild Steel Box Embodies The Organic Elegance Of A Leaf Shape, Providing A Unique And Aesthetically Pleasing Mounting Solution For Led Light Fittings. The Pole Is Anchored By A Sturdy Ms Base Plate Measuring 250 X 250 Millimetres, With A Thickness Of 12 Millimetres. The Material For The Base Plate Is Steel Of Grade E250 To Is 2062; 2011. The Pole Will Have A Window Cut Out At The Bottom For A Built-In Junction Box To Mount A Connector And 6A Mcb. This Architecturally Designed Pole Is Structurally Sound And Wind Speed Considered In Design 50M/S, Is 875: Part- 3:1987, Material Of The Steel Tubes Is Yst210. The Pole Undergoes A Meticulous Painting Process, Enveloping It In A Lustrous Coat Of Highly Durable Green Leafy Polyurethane Paint. Double Arm Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. Double Arm Pole - 1 Nos. Along With Erecting Of Integrated Led Street Light Fitting 50 To 60W Ip65 & Ik08 Class Having Single Piece Pressure Die-Cast Aluminium Housing, Having System Lumens Output Of Min. 4400 Lumens, Min. Efficacy Of 110 Lumen/W, Cri70, Cct Upto 6500K, Thd0.95, Operating Range Of 140 270V, Inbuilt Surge Protection Of 10 Kv, Life Class Of 50,000 Hrs. At L70b50, Including Driver Complete With 3 Years Warranty. - 2 Nos. Microprocessor Based Dimmable Electronic Circuit Unit Suitable For 40 W Led Street Light Which Having Fix Type Dimming Circuit For 50 % Of 40 W I.E. 20 W After 5 Hrs From The Initial Operating Time. - 2 Nos. Making Suitable M- 20 Grade Reinforced Cement Concrete Foundation By Considering The Safe Soil Bearing Capacity At Site As 10 T/Sq.M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete. - 1 Nos. Spmcb 0.5A To 5A, C-Series With Rated Short - Circuit Breaking Capacity (Icn) 10Ka In Provided Distribution Board - 2 Nos. Pvc Insulated Pvc Round Sheathed 1.5 Sq.Mm (30 No. X 0.25 Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv - 10 Mtr. Laying Of Fr Xlpe Insulated, Galvanised Steel Formed Wire Armoured (Strip) Cable 1100 V, 4 Core 6 Sq. Mm. Aluminium Conductor Complete Erected With Glands & Lugs, On Wall/ Trusses/Pole Or Laid In Provided Trench/ Pipe. - 14 Mtr. Supplying And Laying (Including Excavation Of Suitable Width & Depth Up To 90 Cm) 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) Of Hdpe For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete. - 10 Mtr. Providing Pipe Type Earthing With 40Mm. Dia. G.I. Pipe Or 20 Mm Dia. G.I. Rod Complete With All Materials Testing And Recording The Results. - 1 Nos. With Pole Mounting 30-40 W Rms 40/20/10/5W 160-16000Hz 88 Db. Pa Garden Speaker, Ip -65 And Allied Accessories Like Amplifier, Mixer, Required Armoured Cable And Dwc Pipe Etc. , Technical Specifications:- Supply, Installation, Testing & Commissioning Of 4-Meter-Long Leaf Type Double Arm Ornate Galvanized Iron Layer Light Pole Having An Additional Arm At 3.5 Meter From Ground Level To Highlight The Footpath Area. Its Outer Diameter Measures 90 Millimetres That Has Fluted Grooves Throughout The Surface Of The Pipe That Creating A Visually Pleasing Silhouette. The Pole Has A Cnc Profile Sheet Along The Surface That Not Only Creates An Elevated Visual Appeal But Also Gives It More Strength That Has Been Achieved With Utmost Precision Through Cnc Machining. The Walls Of The Pole Exhibit A Thickness Of 3.00 Millimetres, Ensuring Both Durability And Aesthetic Balance. The Pole Comes With 2 Nos. Of Cnc Machined Mild Steel Box Embodies The Organic Elegance Of A Leaf Shape, Providing A Unique And Aesthetically Pleasing Mounting Solution For Led Light Fittings. The Pole Is Anchored By A Sturdy Ms Base Plate Measuring 250 X 250 Millimetres, With A Thickness Of 12 Millimetres. The Material For The Base Plate Is Steel Of Grade E250 To Is 2062; 2011. The Pole Will Have A Window Cut Out At The Bottom For A Built-In Junction Box To Mount A Connector And 6A Mcb. This Architecturally Designed Pole Is Structurally Sound And Wind Speed Considered In Design 50M/S, Is 875: Part- 3:1987, Material Of The Steel Tubes Is Yst210. The Pole Undergoes A Meticulous Painting Process, Enveloping It In A Lustrous Coat Of Highly Durable Green Leafy Polyurethane Paint. Double Arm Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. Double Arm Pole - 1 Nos. Along With Erecting Of Integrated Led Street Light Fitting 40 To 50W Ip65 & Ik08 Class Having Single Piece Pressure Die-Cast Aluminium Housing, Having System Lumens Output Of Min. 4400 Lumens, Min. Efficacy Of 110 Lumen/W, Cri70, Cct Upto 6500K, Thd0.95, Operating Range Of 140 270V, Inbuilt Surge Protection Of 10 Kv, Life Class Of 50,000 Hrs. At L70b50, Including Driver Complete With 3 Years Warranty. - 2 Nos. Microprocessor Based Dimmable Electronic Circuit Unit Suitable For 40 W Led Street Light Which Having Fix Type Dimming Circuit For 50 % Of 40 W I.E. 20 W After 5 Hrs From The Initial Operating Time. - 2 Nos. Making Suitable M- 20 Grade Reinforced Cement Concrete Foundation By Considering The Safe Soil Bearing Capacity At Site As 10 T/Sq.M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete. - 1 Nos. Spmcb 0.5A To 5A, C-Series With Rated Short - Circuit Breaking Capacity (Icn) 10Ka In Provided Distribution Board - 2 Nos. Pvc Insulated Pvc Round Sheathed 1.5 Sq.Mm (30 No. X 0.25 Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv - 10 Mtr. Laying Of Fr Xlpe Insulated, Galvanised Steel Formed Wire Armoured (Strip) Cable 1100 V, 4 Core 6 Sq. Mm. Aluminium Conductor Complete Erected With Glands & Lugs, On Wall/ Trusses/Pole Or Laid In Provided Trench/ Pipe. - 14 Mtr. Supplying And Laying (Including Excavation Of Suitable Width & Depth Up To 90 Cm) 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) Of Hdpe For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete. - 10 Mtr. Providing Pipe Type Earthing With 40Mm. Dia. G.I. Pipe Or 20 Mm Dia. G.I. Rod Complete With All Materials Testing And Recording The Results. - 1 Nos. , Technical Specifications:- Supply, Installation, Testing & Commissioning Of 5-Meter-Long Leaf Type Double Arm Ornate Galvanized Iron Layer Light Pole Having An Additional Arm At 4.5 Meter From Ground Level To Highlight The Footpath Area. Its Outer Diameter Measures 90 Millimetres That Has Fluted Grooves Throughout The Surface Of The Pipe That Creating A Visually Pleasing Silhouette. The Pole Has A Cnc Profile Sheet Along The Surface That Not Only Creates An Elevated Visual Appeal But Also Gives It More Strength That Has Been Achieved With Utmost Precision Through Cnc Machining. The Walls Of The Pole Exhibit A Thickness Of 3.00 Millimetres, Ensuring Both Durability And Aesthetic Balance. The Pole Comes With 2 Nos. Of Cnc Machined Mild Steel Box Embodies The Organic Elegance Of A Leaf Shape, Providing A Unique And Aesthetically Pleasing Mounting Solution For Led Light Fittings. The Pole Is Anchored By A Sturdy Ms Base Plate Measuring 250 X 250 Millimetres, With A Thickness Of 12 Millimetres. The Material For The Base Plate Is Steel Of Grade E250 To Is 2062; 2011. The Pole Will Have A Window Cut Out At The Bottom For A Built-In Junction Box To Mount A Connector And 6A Mcb. This Architecturally Designed Pole Is Structurally Sound And Wind Speed Considered In Design 50M/S, Is 875: Part- 3:1987, Material Of The Steel Tubes Is Yst210. The Pole Undergoes A Meticulous Painting Process, Enveloping It In A Lustrous Coat Of Highly Durable Green Leafy Polyurethane Paint. Double Arm Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. Double Arm Pole - 1 Nos. Along With Erecting Of Integrated Led Street Light Fitting 50 To 60W Ip65 & Ik08 Class Having Single Piece Pressure Die-Cast Aluminium Housing, Having System Lumens Output Of Min. 4400 Lumens, Min. Efficacy Of 110 Lumen/W, Cri70, Cct Upto 6500K, Thd0.95, Operating Range Of 140 270V, Inbuilt Surge Protection Of 10 Kv, Life Class Of 50,000 Hrs. At L70b50, Including Driver Complete With 3 Years Warranty. - 2 Nos. Microprocessor Based Dimmable Electronic Circuit Unit Suitable For 40 W Led Street Light Which Having Fix Type Dimming Circuit For 50 % Of 50 W I.E. 25 W After 5 Hrs From The Initial Operating Time. - 2 Nos. Making Suitable M- 20 Grade Reinforced Cement Concrete Foundation By Considering The Safe Soil Bearing Capacity At Site As 10 T/Sq.M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete. - 1 Nos. Spmcb 0.5A To 5A, C-Series With Rated Short - Circuit Breaking Capacity (Icn) 10Ka In Provided Distribution Board - 2 Nos. Pvc Insulated Pvc Round Sheathed 1.5 Sq.Mm (30 No. X 0.25 Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv - 10 Mtr. Laying Of Fr Xlpe Insulated, Galvanised Steel Formed Wire Armoured (Strip) Cable 1100 V, 4 Core 6 Sq. Mm. Aluminium Conductor Complete Erected With Glands & Lugs, On Wall/ Trusses/Pole Or Laid In Provided Trench/ Pipe. - 14 Mtr. Supplying And Laying (Including Excavation Of Suitable Width & Depth Up To 90 Cm) 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) Of Hdpe For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete. - 10 Mtr. Providing Pipe Type Earthing With 40Mm. Dia. G.I. Pipe Or 20 Mm Dia. G.I. Rod Complete With All Materials Testing And Recording The Results. - 1 Nos. , Technical Specifications:- Supply, Installation, Testing & Commissioning Of 5-Meter-Long Garden Decorative Poles Ornamental And Functional Lighting Fixtures Designed To Enhance The Beauty And Illumination Of Outdoor Gardenstype. The Pole Is Anchored By A Sturdy Ms Base Plate Measuring 175 X 175 Millimetres, With A Thickness Of 12 Millimetres. The Material For The Base Plate Is Steel Of Grade E250 To Is 2062; 2011. Pole Base Section Of Cast Iron And Aluminium Of 750Mm To 1000 Mm Height And 200Mm To 250Mm Dia. Midle Section Of Pole Are Made Of Gi Material With Deep Groove Verticle Or Circular Downstreem Or Upstreem Grooves Having Dia 80Mm To 110Mm And Bracket Of Having Dia 27Mm To 50Mmas Per Designed. The Pole Will Have A Window Cut Out At The Bottom For A Built-In Junction Box To Mount A Connector And 6A Mcb. This Architecturally Designed Pole Is Structurally Sound And Wind Speed Considered In Design 50M/S, Is 875: Part- 3:1987, Material Of The Steel Tubes Is Yst210. The Pole Undergoes A Meticulous Painting Process, Enveloping It In A Lustrous Coat Of Highly Durable Paint. Double Arm Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. Double Arm Pole - 1 Nos. Along With Erecting Of Integrated Led Street Light Fitting 50 To 60W Ip65 & Ik08 Class Having Single Piece Pressure Die-Cast Aluminium Housing, Having System Lumens Output Of Min. 4400 Lumens, Min. Efficacy Of 110 Lumen/W, Cri70, Cct Upto 6500K, Thd0.95, Operating Range Of 140 270V, Inbuilt Surge Protection Of 10 Kv, Life Class Of 50,000 Hrs. At L70b50, Including Driver Complete With 3 Years Warranty. - 2 Nos. Microprocessor Based Dimmable Electronic Circuit Unit Suitable For 50 W Led Street Light Which Having Fix Type Dimming Circuit For 50 % Of 50 W I.E. 25 W After 5 Hrs From The Initial Operating Time. - 2 Nos. Making Suitable M- 20 Grade Reinforced Cement Concrete Foundation By Considering The Safe Soil Bearing Capacity At Site As 10 T/Sq.M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete. - 1 Nos. Spmcb 0.5A To 5A, C-Series With Rated Short - Circuit Breaking Capacity (Icn) 10Ka. , Technical Specifications:- Supply, Installation, Testing & Commissioning Of M S Decorative Ornamental Combo Pole 6.00 Meter Long, As Per Approved Drawing By Pwd And Architect. Having Bottom Section: 1.20 Meter Long, Made As Under:- Octagonal Shaped Cast Iron Casting At Base Having The Following Dimensions Length 250Mm, Bottom Diameter 170Mm, Inner Diameter 140Mm Outer Diameter For Ms Grooved Pipe 140Mm, Length 650Mm Long. Having A Built In Junction Box With Mcb And Connector Decorative Aluminium Ornamental Pot Shaped Die Casting Length 350Mm Long. Mounting Base Plate 250 X 250 X 12 Mm, Along With Slots 19X40mm For Foundation Bolts Middle Section: 2.80 Meter Long, Made As Under:- Spiral Grooved Pipe Having Outer Diameter Out Of 90Mm, Length 2.80 Meter Long. Along With Single Decorative Dotted Aluminium Casting Ring At The Centre Of The Spiral Grooved Pipe Inner Diameter 90Mm, Outer Diameter 110Mm, Height 48Mm Of The Ring. With 1 Nos Of Grooved Aluminium Embellishment Casting At The Top Of Spiral Grooved Pipe, Inner Diameter 76Mm, Outer Diameter 155Mm, Length 180Mm Long. Top Section: 2.00 Meter Long, Made As Under: - Made Out Od 76.1 Mm Od Pipe 2.00 Meter Long Along With Decorative Ms Sheet Metal Arrow Shaped Dome At The Top Of The Pole. The Poles Surface Will Be Cleaned To Removes Any Oil Deposits And Will Be Sand Basted, Post That The Pole Will Get 2 Coats Of Epoxy Primer And Then The Pole Will Be Painted With Polyurethane Paint Antique Finish And A Single Coat Of Lacquer P U Coating. Double Arm Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. The Bracket Arm Is Made Out Of 27 Mm Od Pipe For Running The Cable Through The Bracket With An Overhang Of 1.2 Meter. And Will Have The Required Reducer To Mount Hanging Led Fixture The Surface Of The Bracket Will Be Cleaned To Removes Any Oil Deposits And Will Be Sand Basted, Post That The Bracket Will Get 2 Coats Of Epoxy Primer And Then The Bracket Will Be Painted With Polyurethane Paint Antique Finish And A Single Coat Of Lacquer P U Coating, Double Arm Ornamental Bracket As Per Drawing, Having Unique Heavy Duty Decorative Cast Iron Embellishments. Double Arm Pole - 1 Nos. Along With Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip 65 Optical Compartment With High Power Leds Is Comprised Of A Deep Drawn Chemically Polished And Construction Of Extruded, Thermoformed Polycarbonate Protector Stabilizes Agent Uv Rays Suitable For 60 W Led. Fitting Should Be Hanging Type Mounting Decorative Fixture. Fitting Should Have Inbuilt Driver With Higher Efficiency 0.9 And Having Surge Protection Device Of 4Kva And External Surge Protection Device Of 10 Kva, Colour Temperature 3000K/4000K/5700 K Natural Day Light Led. - 2 Nos. Microprocessor Based Dimmable Electronic Circuit Unit Suitable For 40 W Led Street Light Which Having Fix Type Dimming Circuit For 50 % Of 40 W I.E. 20 W After 5 Hrs From The Initial Operating Time. - 2 Nos. Making Suitable M- 20 Grade Reinforced Cement Concrete Foundation By Considering The Safe Soil Bearing Capacity At Site As 10 T/Sq.M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete. - 1 Nos. Spmcb 0.5A To 5A, C-Series With Rated Short - Circuit Breaking Capacity (Icn) 10Ka In Provided Distribution Board - 2 Nos. Pvc Insulated Pvc Round Sheathed 1.5 Sq.Mm (30 No. X 0.25 Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv - 12 Mtr. Laying Of Fr Xlpe Insulated, Galvanised Steel Formed Wire Armoured (Strip) Cable 1100 V, 4 Core 6 Sq. Mm. Aluminium Conductor Complete Erected With Glands & Lugs, On Wall/ Trusses/Pole Or Laid In Provided Trench/ Pipe. - 19 Mtr. Supplying And Laying (Including Excavation Of Suitable Width & Depth Up To 90 Cm) 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) Of Hdpe For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete. - 15 Mtr. Providing Pipe Type Earthing With 40Mm. Dia. G.I. Pipe Or 20 Mm Dia. G.I. Rod Complete With All Materials Testing And Recording The Results. - 1 Nos. With Pole Mounting 40 W Rms 40/20/10/5W 160- 16000Hz 88 Db. Pa Garden Speaker, Ip -65 And Allied Accessories Like Amplifier , Mixer Required Armoured Cable And Dwc Pipe Etc , Supply Installation And Testing Of Led Solar Highmast Of Having 50W* 4 Flood Light (Certification-Mnre/Nabl/Bis Certified) Flood Light Solar High Mast Light-50W* 4, Led 140Lm/Watt, Ip65 Panel-1340-Wp (335Wp*4) Mono (Mbb) Mnre/Iec/Nabl Approved Battery-400Ah (Sb 100Ah* 4, 12.8V) Lifepo4 Bis Approved. Controller-Mppt Dusk To Dawn, Dimming 50% After 4 Hours. Protection Battery Over Charge, Short Circuit, Reverse Flow, Reverse Polar-Ity, Deep Discharge. Pole Mounting Acces-Sories Battery Box, (Suitable For Pully Pole). Having Octagonal Pole 7 Mtr 002 Height-7 Meter (23 Feet) Thickness-3 Mm Od Top 100 Mm Od Bottom-200 Mm Baseplate (L*W*T)-275*275*16 Mm Finishing-Superior Finish Anti-Rust Coating Corrosion Property-Greater Resistance To Corrosion. Foundation J Bolt 24*750 Mm 001 For-Foundation J Bolt No Of Bolts 4 Nos In A Set Diameter-24 Mm Lengh 750 Mm Template Pcd 275 Mm For 7 Octagonal Pole Template Pcd-275×275 Mm Pcd Hole-2800×4 Thickness-1.5 Mm Pole Suitable * 7 Mtr 100/2009 Mtr Warranty -5 Years For Complete System , Supply Installation And Testing Of Led Solar Highmast Of Having 50W* 4 Flood Light (Certification-Mnre/Nabl/Bis Certified) Flood Light Solar High Mast Light-50W* 4, Led 140Lm/Watt, Ip65 Panel-1340-Wp (335Wp*4) Mono (Mbb) Mnre/Iec/Nabl Approved Battery-400Ah (Sb 100Ah* 4, 12.8V) Lifepo4 Bis Approved. Controller-Mppt Dusk To Dawn, Dimming 50% After 4 Hours. Protection Battery Over Charge, Short Circuit, Reverse Flow, Reverse Polar-Ity, Deep Discharge. Pole Mounting Acces-Sories Battery Box, (Suitable For Pully Pole). Having Octagonal Pole 7 Mtr 002 Height-7 Meter (23 Feet) Thickness-3 Mm Od Top 100 Mm Od Bottom-200 Mm Baseplate (L*W*T)-275*275*16 Mm Finishing-Superior Finish Anti-Rust Coating Corrosion Property-Greater Resistance To Corrosion. Foundation J Bolt 24*750 Mm 001 For-Foundation J Bolt No Of Bolts 4 Nos In A Set Diameter-24 Mm Lengh 750 Mm Template Pcd 275 Mm For 9 Mtr Octagonal Pole Template Pcd-275×275 Mm Pcd Hole-2800×4 Thickness-1.5 Mm Pole Suitable * 9 Mtr 100/2009 Mtr Warranty -5 Years For Complete System , Supply Installation And Testing Of Led Solar Highmast Of Having 50W* 4 Flood Light (Certification-Mnre/Nabl/Bis Certified) Flood Light Solar High Mast Light-50W* 4, Led 140Lm/Watt, Ip65 Panel-1340-Wp 335Wp Mono (Mbb) Mnre/Iec/Nabl Approved Battery-150 Ahx2 Lifepo4 Bis Approved. Controller-Mppt Dusk To Dawn, Dimming 50% After 4 Hours. Protection Battery Over Charge, Short Circuit, Reverse Flow, Reverse Polar-Ity, Deep Discharge. Pole Mounting Acces-Sories Battery Box, (Suitable For Pully Pole). Having Octagonal Pole 6 Mtr Including Foundation J Bolt Warranty -5 Years For Complete System , Installation Of Existing Solar Panel With New Required Structure ,With Acdb,Dcdb Required Nverter Ac Wiring,Dc Wiring As Per Kw. , Installation Of Smart Pole, Solar Powered Min 35 Watt Luminare, Provision For Wi-Fi , Video Surveliance,Multimedia Braodcasting Led , Autonomous Charging Pile.