Tender For Special Repair Of Sewa Kendra At Village Natheha, Tehsil Talwandi Sabo, Distt Bathinda, Punjab
Tender Value
11.89 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
7 days left
EMD
23794
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Sewa Kendra At Village Natheha, Tehsil Talwandi Sabo, Distt Bathinda, Punjab
BOQ
| Sl. No. | Item Description |
| 1 | Civil work |
| 2 | Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded). (CSR no 31.11) |
| 3 | Applying bitumen on roof including heating and carrying to roof. (CSR no 13.53) |
| 4 | Cost of New tiles to be replaced |
| 5 | Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per spefications and to the entire satisfaction of Engineer-in-charge.(If fixed on wall face clamp to be paid separatly as per respective item ) (CSR no 13.74) |
| 6 | Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per spefications and to the entire satisfaction of Engineer-in-charge. (CSR no 13.75) |
| 7 | Top Khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick concrete 1:8:16. (CSR no 13.45) |
| 8 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. (CSR no 13.55) |
| 9 | Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 (CSR no 13.51) |
| 10 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. (CSR no 30.95) |
| 11 | Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping using mechanical mixer for mixing of material (CSR no 14.11) |
| 12 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)Size 600x600 mm (CSR no 14.115 a) |
| 13 | Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size 600x600 mm. (CSR no 14.118 a) |
| 14 | Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge. (CSR no 14.135) |
| 15 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.Doors of area 3 sqm and below. (CSR no 8.26 a) |
| 16 | Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge.Doors and windows frame of size 118mm x60mm with 40 mm wide single rebate weighing3.43 kg per meter.(CSR no 18.51 a) |
| 17 | Scrapping of Cement Plaster (CSR no 8.31 c) |
| 18 | 12.5 mm thick cement plaster 1:4 (CSR no 15.9) |
| 19 | 20mm thick cement plaster 1:4 in two coat work (CSR no 15.20) |
| 20 | Renewing glass panes with putty and nails wherever necessary Glass panes weighing 10.75 Kg/sqm (CSR no 31.5) |
| 21 | Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position Commercial with elm or gurjanfacing on both \ Sides withlaminated core and lipped edges:-35mm thick (CSR no 17.27) |
| 22 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. (CSR no 16.16) |
| 23 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (CSR no 16.17) |
| 24 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. (CSR no 16.18) |
| 25 | Cost of aluminium fittings complete for doors, windows, such as tower bolts, handles & screws etc. for these fittings (excluding sliding bolt).for shutter area above 0.50sqm (CSR no 17.23 b ii) |
| 26 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (CSR no 17.49) |
| 27 | Preparation of plasterd or concerete surfaces for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish (CSR no 16.65) |
| 28 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm (CSR no 16.59) |
| 29 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) (CSR no 16.63) |
| 30 | Providing & fixing 16 guage stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainles steel pipe, Balusters of 40mm dia stainless steel pipe complete in all respects.(CSR no 18.39) |
| 31 | Writing matter on front signage Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 (as per SOE approved Rate) |
| 32 | Providing and Fixing Name Plates of various sizes made of PVC sheet printed with self adhesive tape pasted on sunboard complete as desired by Engineer-in-Charge (as per SOE approved Rate) |
| 33 | Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge.3mm thick ACP Sheet (CSR no 17.97 iii) |
| 34 | Dismentling of Existing ACP Sheet to be removed carefully so that based frame should not be damagedAlloted in sewa kendr singo |
| 35 | Providing and fixing Roller Blinds at the designated locations with fabric/ texture approved by the Architect/ engineer-in-charge Alloted in sewa kendr singo |
| 36 | ROAD AND PARKING |
| 37 | Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type (CSR no 10.6 ii) |
| 38 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge . IS Code: 15658 (2006) (CSR no 14.137) |
| 39 | Construction of Boundary Wall 6 feet Height |
| 40 | Earth in Exacavation in foundation trenches etc. in all kinds of soil complete in all respects as per PWD specifications (Ch. 6.6) |
| 41 | Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type (CSR no 14.6 ) |
| 42 | First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth (Ch. 11.3 i) |
| 43 | Cement concrete 1:2:4 on topping of walls complete in all respects as per PWD specifications. (Ch. 10.13 A ii) |
| 44 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. (CSR no 11.4.I) |
| 45 | 12.5 mm thick cement plaster 1:4 (Ch. 15.9) |
| 46 | 20mm thick cement plaster 1:4 in two coat work (Ch. 15.20) |
| 47 | Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade (Ch. 16.13) |
| 48 | Iron grated doors, including pintle hinges & arrangements. (CSR no 18.5) |
| 49 | PUBLIC WORK ESTIMATE |
| 50 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm guage and 100mm fine sand filling using mechanical mixer for mixing of material |
| 51 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 52 | Providing and fixing1st quality ceramic glazed wall tiles Matt/Semi Matt/ Glosy/ Highly Gloss finish/Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottlegreen, black of size 450x310 mmasapproved by Engineer-in Charge in skirting, risers of step sand dadosover 12 mm thick bed of cement Mortar1:4 (1cement: 4 fine sand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 53 | EXTERNAL IN THE GROUND: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. |
| 54 | SDR 11 CPVC pipes & fittings 20mm o/d |
| 55 | CPVC SDR 11 Pipe & fitting 25mm o/d |
| 56 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 57 | 20mm i/d G.I. Union |
| 58 | 25mm i/d G.I. Union |
| 59 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. |
| 60 | 25mm i/d Brass Ball valves |
| 61 | 20mm i/d Brass Ball valves |
| 62 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 63 | Through wall 22.86 cm thick |
| 64 | Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.4.5kg capacity |
| 65 | Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect. 4 Kg. Capacity |
| 66 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weightas per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. |
| 67 | 450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal |
| 68 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. |
| 69 | 110mm o/d pipe |
| 70 | GT to IC |
| 71 | Disilting of manhole including all safetymeasures, cost of container T & P anddisposal of silt upto 5km complete in allrespects. Cleaning of septic tank |
| 72 | Depth upto 3 m. |
| 73 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 74 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 75 | Providing and fixing jet spray with 2'-6\\" long PVC pipe.With CP brass nut |
| 76 | P/F CP brass urinal spreader ocular-regular complete with fittings for urinals. |
| 77 | Providing&fixing inposition UV filter having flow rate 200 ltr/hr with 3 stage purification processhaving16wattUVlampand35Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriageand fixing inpositioncomplete inall respect |
| 78 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugsembedded in walls with brass screws complete in all respect.C.P brass towel ring |
| 79 | Providing and fixing in positionC.P. brass soap dish of approved make(to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 80 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm) |
| 81 | Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.C.P. Brass khunti with 6 pegs |
| 82 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 83 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 84 | Providing & Fixing in postion .bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineerin- charge ) complete in all respect. |
| 85 | CP brass bib cock foam flow |
| 86 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 87 | PTMT 15mmConceiled Stop Cock/ Angle valve without flange |
| 88 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 375 mm with PTMT nut |
| 89 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.Single Socket Type A |
| 90 | 110mm o/d single socket SWR UPVC pipe lines laid complete |
| 91 | 90 mm o/d single socket SWR UPVC pipe lines laid complete for vent pipe |
| 92 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 93 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 94 | For 110mm i/d pipes |
| 95 | Elbow 90 Degree (All side socketed) |
| 96 | Vent Cowls |
| 97 | Coupler |
| 98 | Floor Trap 110mmx75mm |
| 99 | P trap/floor trap 110mm x 110 mm |
| 100 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 101 | Eurpoean/Indian/Orissa W.C., |
| 102 | CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap |
| 103 | Wash Hand Basin / Urinal Pot |
| 104 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 105 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 106 | Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball |
| 107 | Brass Ball Cock with rod and Plastic Ball 25mm i/d |
| 108 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. |
| 109 | Double Layer Tanks |
| 110 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. |
| 111 | 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm |
| 112 | Providing & Installing & Erection split type wall mounted air conditioner capacity 1.5 tonne 3 Star Make:- Mitsubishi Electric, Daikin, O' General, Hitachi or equivalent with 4.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects |
| 113 | Construction of Plateform complete as per specification & as desired by Enginer-in-charge |
| 114 | For 1000 ltr Water Tank |
| 115 | Repair of water cooler Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender