Tender For Construction Of Additional Accommodation For Border Block Library Sogam By Way Of Raising First Floor Of Existing Library Building. Advertised Cost: 44.40 Lacs.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Aug 2026
9 days left
EMD
89000
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Additional Accommodation For Border Block Library Sogam By Way Of Raising First Floor Of Existing Library Building. Advertised Cost: 44.40 Lacs.
BOQ
| Sl. No. | Item Description |
| 1 | Part A Civil Work:Dismantelling roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 meters lead of G.S. Sheet |
| 2 | Dismantelling woodwork in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead of sectional area 40 sqcm and above. |
| 3 | Brickwork with common burnt clay(non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) including extra for brick work upto floor five level incl all carriage of material |
| 4 | Providing Woodwork in Frames of Doors, windows, clearstory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners.IMPORTED WOOD |
| 5 | Providing and fixing panelled or/and Glazed Shutters for doors, windows using 4mm thick float Glass pannes including ISI mark MS pressed Butt hings bright finished of required size with necessary screws. IMPORTED WOOD 30MM THICK |
| 6 | Providing and fixing 30mm wire gauze shutters using galvanised M.S wire gauze of avg width for aparture 1.4 mm in both directions with wire of dia 0.63 mm for doors, windows with ISI mark MS pressed Butt hings bright finished of required size with necessary screws. as per directions of engineer in charge .imported wood 30 mm thick |
| 7 | Providing and fixing of 3.5 mm thick glass panes in fixed windows/doors incld wooden beadings complete. |
| 8 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigmentsetc. complete 600x600mm |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in- Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per directions of engineer in charge. |
| 10 | Flooring with marble stone of specified thickness as per sample ofmarble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with:Raj Nagar plain |
| 11 | CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1:4(1 cement:4 fine sand) Internal and external |
| 12 | Providing and applying white cement based putty of specified thickness over plastered surface to prepare the surface even and smooth complete.2 mm thick |
| 13 | Extra for plastering done on moulding cornices or architraves includingneat finish to line and level :in two coats |
| 14 | Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications:Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 15 | painting wood work with delux multi surface paint of required shade. Two or more coats applied @ 0.90 liter/10sqm over an under coat of primer applied @ 0.75 liter/10 sqm of approved brand and manufacture 13.57.3 |
| 16 | P/F of board ceiling of approved quality (ply wood 12 mm thick) with necessary Screws, incl frame work of budloo wood , incl cost of nails & beading all complete |
| 17 | Providing woodwork in trusses, Purlins and rafters including all necessary items complete job, Available at site |
| 18 | Providing woodwork in trusses, Purlins and rafters including all necessary items complete job, New Quantity imported wood |
| 19 | Providing and fixing thermal insulation of ceiling (under deck insulation) with specified glass wool conforming to IS: 8183, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60cm c/c and wire mesh of 12.5mm x 24g wire for topmost ceiling of building.With resin bonded fiber glass wool with density 24 kg/cum |
| 20 | Providing HR Colour coated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.5 mm thick with zinc coating not less than 275 gram/m2 of require shade and color as per directions of Engineer in Charge |
| 21 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. |
| 22 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) crushed aggregate incl carriage |
| 23 | Centring and shuttering including strutting, propping etc and removal of form work Suspended floors, roofs, landings, balconies and access platforms etc. |
| 24 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo- Mechanically Treated bars of grade Fe-500D or more. |
| 25 | Providing & installation of satin finish stainless steel AISI 304 stainless steel Handrail and balustrade system having 50mm dia tube handrail (1.5 mm gauge) weight 2.82 kg erected with chemical grout to be fixed on the top lof slab/skirting (Spigot Fixed) 40mm dia vertical posts and alternate step, 16mm dia horizontal rails 3No height shall be upto 21000 mm above the finished skirting level complete as per archetectural drawings. |
| 26 | Part B Sanitary and Plumbing:Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer- incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cuttingchases and making good the wall etc.PN-16 pipe, 20mm OD(SDR-7.4) |
| 27 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer- incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cuttingchases and making good the wall etc.PN-16 pipe, 25mm OD(SDR-7.4) |
| 28 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer- incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 40mm OD(SDR-7.4) |
| 29 | Providing & Fixing P.V.C soil, waste, rain water Pipes, Vent pipes medium class ISI Mark including all fittings with or without access of any digree 1.e bends, junctions , cowls, offsets, access pieces, holder bats and structural steel fabricated supports, clamps for suspended pipes in cieling, stays, through ducts etc and jointing with solvent/seal joints including cutting holes in walls and floors.100 mm dia |
| 30 | Providing & Fixing P.V.C soil, waste, rain water Pipes, Vent pipes medium class ISI Mark including all fittings with or without access of any digree 1.e bends, junctions , cowls, offsets, access pieces, holder bats and structural steel fabricated supports, clamps for suspended pipes in cieling, stays, through ducts etc and jointing with solvent/seal joints including cutting holes in walls and floors.75 mm dia |
| 31 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 32 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 550x400 mm. |
| 33 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 34 | Providing and fixing 15mm nominal bore angle valve of standard quality and make including all accessories & pvc connections as per directions of EIC complete job |
| 35 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with a minimum distance of 37mm from wall face with concealed fittings arrangemants of approved quality and colour, weighing not less than 88 gms |
| 36 | Providing and fixing PTMT soap dish holder having length of 138mm, bredth 102mm, height of 75 mm with concealed fitting arrangemants weighing not less than 106 gms. |
| 37 | Providing & Fixing brass bib cock of approved quality |
| 38 | Providing and fixing C.P Brass single lever telephonic wall mixer of quality & make as approved by enginer in charge15 mm nominal bore |
| 39 | Providing & fixing 600x450 mm bewelded edge mirror of superior glass (of approved quality ) complete with 6mm thick hatrd board ground fixed to wooden cleats with C.P Brass screws and washers complete. |
| 40 | Providing and fixing Unplasticized PVC Connection pipe with Brass unions. |
| 41 | Providing and fixing water heater (Geyser) of standard quality and make including all fixtures. 50 Ltr as per directions of engineer in charge. |
| 42 | Providing and fixing C.P / Stainless steel anti coakroach trap (grating) on floor traps and floor drains with cement mortar, complete in all respects 100 mm dia |
| 43 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 44 | Constructing brick masonry chamber for underground C.I. inspectionchamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick withcement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line- |
| 45 | Part C Electric fittings:Wiring for Light point/Fan point/Exhaust fan/Bell point with (P+N+E) 3x1.5 sq.mm FRLS-H PVC insulated Multi strand Copper conductor single core cable, (Havells/Polycab/Anchor/Eq Make) in surface/recessed Conduits laid in slabs (Including Cost of Conduit 25mm) with 01 No.of 6 Amp Modular Switch,Modular Plate,Cover in front & suitable GI box etc ISO/IEC Certified/Schneider/ Havells/ Legrand/Anchor roma plus/ABB/Eq.Make & along with 2.5 Sqmm (P+N+E) Circuit Wire of same make as mentinoned above & items shall be approved before execution of work by SDO. |
| 46 | Supply and fixing two module stepped type electronic fan requlator on the existing modular olate switch box including connections but excluding modular plate etc. as required , ISO/IEC certified of schncider Znecelo/Havels or eq make approved by SDO |
| 47 | Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/Anchor/Eq. Make) |
| 48 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified /Legran/Anchor roma plus/Schneider/ABB/Eq Make & shall be approved before execution of work by SDO. |
| 49 | 4 Sq mm copper Lugs/Thimbles for originating/terminating the wire |
| 50 | Wiring for 6Amp Plug(Computer Point) with (P+N+E) 3 x 2.5 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/Anchor/Eq. Make) |
| 51 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 no 3 pin 5/6 & 15/16 A modular socket outlet and 2 nos 5/6 A modular switch, connections etc. as required, ISO/IEC Certified /Legran/Anchor roma plus/Schneider/ABB/Eq Make & shall be approved before execution of work by SDO. |
| 52 | Wiring for Sub main Wiring along wilh earth Wire with the folloving Sizes of FRLS PVC insulated copper conductor, single core Cable in surace/Rccessed medium class PVC conduit (Havells Lifeguard/Polycab Grecn/AnchorFireguard/ Eq,Make) & shall be approved before execution of work (lncludingCost of Conduit/Channel)2×2.5 sq,mm+ lx2.5 sq.mm (P+N+E) for circuit Wire |
| 53 | Supply/Fixing/Testing and Commissioning of 6Amp to 32Amp Rating SP,240v,*C* Curve 10K, Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB DB Complete with connections. (L&T/Siemens/Legrand/Havells/ABB/Eq. Make) |
| 54 | Supply/Fixing/Testing and Commissioning of following rating, Double pole, (P+N) 240 V, C* Curve 10K,Miniature Circuit Breaker (MCB) in the existing MCB DB complete with connections. (L&T/Siemens Legrand/Havells/ABB/Eq Make) |
| 55 | 40 Amp |
| 56 | 63 Amp |
| 57 | 32 Amp |
| 58 | 100 Amp for main supply |
| 59 | Supplying and Fixing of MCB 6 way, horizontal typed , sheet steel, Double Door Distribution Board, SPN 240V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (L&T/Siemens/Legrand/ Schneider/ABB/Eq Make) |
| 60 | Supply/Installation/Testing and Commissioning of 15W + LED Conceal (Commerical Type) light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab.The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacement of fixtures of Philips/Havell's/Wipro/Halonix/Eq Make as approved by SDO |
| 61 | Providing & Fixing of IK08 IP-66 protected high power LED 50 Watt flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 Im/wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K 355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. Minimum lumen output 6200 Im of Havells/Crompton/Philips/Halonix Make as approved and to be installed on outside block including S/F of suitable size of Gyser bolt.The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. Havells/Philips/Halonix/Wipro/Eq make |
| 62 | Supply/Installation/Testing and Commissioning of 1200 mm sweep ceiling fan with 03 No. blades, 30 cm long down rod, 02 No. canopies, shackle kit, power factor not less than 0.9, service value including safety pin, nut bolts, washers, temperature rise ≤75°C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase. Supply, etc. complete as required. USHA/Havells/Anchor/Crompton Greaves/Eq. Make |
| 63 | Supply/Laying/Connecting and Commissioning of 25 sq.mm 2 Core XLPE/PVC insulated and Un-armored 1.1 KV grade Aluminum Cable of Havells/Polycab/Eq. Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench .(Material to be approved before execution) |
| 64 | ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER Rod EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value .Supplying, Installation and Testing of 75 mm copper Pipe Filled with Crystallineconductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 2OMM Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Poly ethylene Pipe having Corrugation complete job |
| 65 | Supply,Installation,Testing and Commissioning 320 Cu.m/Hr. AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. Compt 225-250mm Shutter Typed USHA/Havells/Polycab/ Eq Make |
| 66 | Supply/Installation/Testing/Commissioning of Inverter 2 KVA/24 V Pure Sinewave Inverter With ISOT Technology, Intelligent Load Sharing & BIS Certified (with 2-Year Warranty), 02 No. of 180Ah,12V Tubular battery (with 60 Months Warranty) & Suitable Trolley Support for Inverter resting & resting of Tubular Battery etc /Luminous/EXIDE /AMRON/Eq. Make Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender