Tender For Repair & Renovation Of Defunct Lecture Theater Of Law Department, At New University C Us, University Of Jammu, Jammu
Tender Value
8.75 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
14 days left
EMD
17511
Bank guarantee accepted
Document Fee
708
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Renovation Of Defunct Lecture Theater Of Law Department, At New University C Us, University Of Jammu, Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 2 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm and under including cutting the patch in proper shape racking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground outside the University Campus. |
| 3 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered surface to prepare the surface even and smooth complete. |
| 4 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall/ceiling/slopping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture. (All work upto floor V level). |
| 5 | Painting (one or more coats) with synthetic enamel point of Nerolac/ Asian make of required color to give an even shade. |
| 6 | Renewing glass panes, with putty and nails wherever necessary: Float Glass panes of Thickness 4mm (weighing 10 Kg/Sqm). |
| 7 | Providing and fixing ISI marked 35mm thick flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 8 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 Kg/Sqm. (4 mm thick) glass panes including black enamelled ISI marked M.S butt hinges with necessary screws. Second class teak wood 30mm thick shutters. |
| 9 | Painting (Two or more coats) with synthetic enamel point of Nerolac /Asian make of required color to give an even shade. |
| 10 | 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35 Kg per Cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat: With F.P.S. brick tiles. |
| 11 | Supply & Stacking of brick tiles (Ist Class) ( To be paid as per actual at site). |
| 12 | Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) over PVC sheet 1mt x 1mt x 400 micron finished with 12mm cement plaster 1:3 ( 1cement : 3 coarse sand) and a coat of neat cement . Rounding the edge and making and finishing the outlet complete. |
| 13 | Providing angular fillets 75cm x 75 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 crushed aggregate 20 mm nominal size) |
| 14 | Providing and fixing on wall face unplasticised - rigid PVC rain water pipe conforming to IS - 13592 type A including jointing with seal ring conforming to IS :5382 leaving 10mm gap for Thermal expansion. Including all required fitting , sockets, bend , shoe etc. complete in all respect all lead and lift Single socket pipes - 150 mm diameter of 4kg/cm2 pressure (Prince/ Uniplas/ Finolex) |
| 15 | Supply of Labour for cleaning of Roof and allied works etc. complete job. Mazdoor |
| 16 | Providing and Fixing 18mm thick Ply board ( Make Green) including the cost of side moulding, washers, nuts, bolts and including one coat of approved wood primer and then two or more coats of approved wood paints: for repair of desk |
| 17 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material outside the University Campus. |
| 18 | Demolishing mud phaska in terrracing including stacking of serviceable material and disposal of unserviceable material outside the University Campus. |
| 19 | Providing and laying APP (Atactic Poly Propylene Polymer ) modified prefabricated five layer water proofing membrane, black finishing reinforced with glass fibre mat consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sq. mt. by the same membrane manufacture of density at 25°C, 0.87- 0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorized applicator of the manufacture of membrane. 3 mm thick water proofing membrane with non-woven polyester matt: Joint strength in longitudinal and transverse direction at 23°C as 650/450 N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. |
| 20 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm |
| 21 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper |
| 22 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 100 mm |
| 23 | Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 150x10 mm |
| 24 | Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 25 | Providing and fixing powder coated 50 microns aluminum work (10 gauge) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, mechanically and metered jointed wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. For frames and shutter of door windows & ventilators/ Sliding shutters including providing and fixing hinges/pivots, handles, tower bolts, eye hooks/window stays, including the cost of PVC/ neoprene gasket 5mm glass panes/ACP Sheet on both sides, hydraulic door machine where ever required complete job as required. The Spacing of Vertical members not to exceed 4'-0\\" & section to be used is 104 mm x 44.45 mm. |
| 26 | Engage trolly for removal of mulba from site to outside campus. |
| 27 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. |
| 28 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 29 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40 x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender