Tender For Repair & Renovation Of Research Scholar Labs At First Floor No. 14 And Second Floor No 38 & 39 At Chemistry Department Of University Of Jammu, Jammu
Tender Value
6.91 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
14 days left
EMD
13825
Bank guarantee accepted
Document Fee
708
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Renovation Of Research Scholar Labs At First Floor No. 14 And Second Floor No 38 & 39 At Chemistry Department Of University Of Jammu, Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of tile work in floors /Skirting/Dado laid in cement mortar including stacking serviceable material and disposal of unserviceable material to the dumping ground as directed by the engineer in charge. 10 - 25 mm. |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 Metres lead: |
| 3 | Providing and fixing gang saw cut thick mirror polished (Pre moulded & Pre polished) machine cut for kitchen platforms, vanity counters facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement : 4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups, including rubbing ,curing, polishing to edge to give high glossy finish etc. complete at all levels. Granite of any colour or shade (Area of slab upto 0.5 Sqm) 18 mm thick |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 Cement: 4 coarse sand) including grouting the joints with cement and matching pigments etc complete. Size of tile 60×60cm |
| 5 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 6 | Finishing plaster surface with wall care putty (Birla/JK) including sand papering and preparing the surface even and smooth (two or more coats) complete job up to floor V level. Nothing extra shall be paid on account of scaffolding/ formwork etc.(cost of material and labor included) |
| 7 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall/ ceiling/ slopping surfaces to give an even shade including applying priming coat with cement primer. |
| 8 | Painting with synthetic enamel of approved brand and manufacture of required colour to give an even shade (One or more coat) on wood /Steel Work |
| 9 | P &F 18 mm thick waterproof ply of approved make (Green) incl. cost of nail,fevicol,wastage etc complete |
| 10 | Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality 1mm thick |
| 11 | S/F of 20 mm thick teak wood beading incl cost of labour , nails & wastage complete |
| 12 | IInd Carpenter engaged for easing of Door,Window Job Includes removing,cutting and refixing in position complete job |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Centring and shuttering including strutting, propping etc. and removal of form for:removal of form for: Suspended floors, roofs, landings, balconies and access platform. |
| 15 | Edges of slabs and breaks in floors and walls. Under 20 cms wide |
| 16 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . Thermo-Mechanically Treated bars. |
| 17 | P/F ISI marked MS handles 150 mm |
| 18 | Providing and fixing oxidised M.S. hasp and staple (Safety type) conforming to IS : 363 with necessary screws etc. complete : 115 mm |
| 19 | Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 100*10mm |
| 20 | Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickle plating and fixing with necessary screws etc., complete. Overall width 35 mm |
| 21 | Providing and fixing PTMT door catcher of length 72 mm and dia of 42 mm with suitable washers weighing not less than 33gms |
| 22 | Regrading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope relaying plaster gobri leaping and tiles or bricks, grouted in cement mortar1:3 (1 cement: 3 fine sand)including replacing unserviceable tiles or bricks with new ones anddisposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded)within 50 Metres lead |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 25mm nominal outer dia pipes. |
| 24 | 20mm dia pipe |
| 25 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P.brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required: Size 450x300x150mm |
| 26 | P/F of PVC pipe superior quality i.e. Supreme, Prince/Uniplas make of 4 kg/sq cm pressure 100 mm |
| 27 | P/F G.I. Union in existing G.I pipe line cutting & threading the pipe & making long screws including excavation, refilling the earth or cutting of wall & making good the same complete wherever required. 15 mm nom. Bore |
| 28 | P/F CP brass angle valve for basin mixture Geyser points/ washbasins of ‘Parko/Chilly Make’ 15mm nominal bore |
| 29 | P/F C.P brass bib cock of Swan neck three ways of ISI Make. |
| 30 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. Internal Work- Exposed on wall. |
| 31 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix). |
| 32 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand) |
| 33 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth and in superstructure including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand). |
| 34 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 coarse sand). |
| 35 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm). |
| 36 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class teak wood |
| 37 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm |
| 38 | 110 mm |
| 39 | Bend 87.5° 75 mm bend |
| 40 | 110 mm bend |
| 41 | Single tee without door 75x75x75 mm |
| 42 | 110x110x110 mm |
| 43 | Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm |
| 44 | Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia. |
| 45 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 45 cm length 15 mm nominal bore |
| 46 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 47 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms. |
| 48 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 49 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.15mm nominal bore, 105mm long, weighing not less than 138gms. |
| 50 | 20mm nominal bore, 120mm long, weighing not less than 198gms. |
| 51 | Engage Labour for uprooting of plants and vegetation from the building etc Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender