Tender For Supply Installation Testing and Commissioning of 1 No. New Bed Cum Passenger Lift With Allied Electrical Works In J.D Building At Sambhunath Pandit Hospital, Annex-2 Of Ipgmer-Sskm Hospital, Kolkata.(Electrical) (Electrical Work) ------ Su
Tender Value
24.50 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
16 days left
EMD
49000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of 1 No. New Bed Cum Passenger Lift With Allied Electrical Works In J.D Building At Sambhunath Pandit Hospital, Annex-2 Of Ipgmer-Sskm Hospital, Kolkata.(Electrical) (Electrical Work) ------ Supply Installation Testing and Commissioning of Lift
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing & commissioning of bed-cum-20 passenger lift [Geared/Gearless without machine room (MRL)] having regenerative drive as per CPWD General Specification for Electrical Works (Part-III Lift & Escalator) 2003, capacity of bed-cum-20 persons i.e, 1360 Kgs. (simplex selective collective), Stainless steel body (SS 304, 20 SWG), V3F control panel with Automatic Rescue Device and shall comply with latest fire safety recommendations of WBF&ES Department & BIS Codes,NBC 2016 guidelines as amended upto date having provision for barrier free access as per Harmonised Guidelines & Standards for Universal Accessibility in India - 2021 of MoHUA, serving different floors in the lift shaft as per detailed specifications enclosed and as under including all other equipment and accessories complete as required:- |
| 2 | Type: Bed-cum-20 passenger lift |
| 3 | Load : Bed cum 20 Passenger/1360 Kgs. |
| 4 | Control : Microprocessor based with AC variable voltage & variable frequency ( VVVF) . |
| 5 | Machine -- Energy efficient machine, Geared/Gearless, with/without Machine Room. |
| 6 | Speed - 1.0 MPS |
| 7 | Floor served & Stops & Opening :- 3(G+2), 3-stop & 3-opening. |
| 8 | Landing: 3 (Three), all are on same (front) side |
| 9 | Total Rise/ Travel - 14.35 Mtrs. (Approx) |
| 10 | Operation : Microprocessor based simplex selective collective with/without attendant |
| 11 | Signals : Digital car position indicator, car travels direction indicator in car (LCD) & at all landing (LED) with call registration indicator. Buttons: all buttons on car & landing shall be luminous & encoded with braille. |
| 12 | Leveling accuracy : ±5mm Micro levelling arrangement |
| 13 | Car inside : 1300 mm (W) x 2400 mm (D) x 2200mm(H) |
| 14 | Car Entrance : Clear opening 1100 mm (W) x 2000 mm (H) protected with car door. |
| 15 | Car Enclosure : Stainless Steel Sheet (SS 304, 20 SWG) scratch proof,Honeycomb Finish on all sides & with a hand rail not less that 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car. |
| 16 | Car ceiling & Lighting & Fans : Stainless steel (SS 304, 20 SWG) decorative ceiling with Honeycomb Finish with fans (indirect throw) and LED fitting. |
| 17 | Car Ventilation- minimum 2 nos Radial Blower fan with anodized aluminium grill.(Upto the satisfaction of EIC) |
| 18 | Car Flooring: The car flooring should be smooth and antiskid as approved by engineer-in-charge. |
| 19 | Car Door :Power operated, centre opening horizontal sliding stainless steel (SS 304, 20 SWG) scratch proof Honeycomb Finish. |
| 20 | Landing Door-stainless steel (SS 304, 20 SWG) scratch proof Honeycomb Finish. |
| 21 | Door Opening - Automatic power oprated door with full length Photocell assembly light curtain sensor |
| 22 | PROTECTIVE DEVICES & OTHER ACESSORIES: |
| 23 | ARD- Automatic rescue device complete with dry maintenance free batteries (FR Type) as required. for automatic evacuation to the nearest floor in case of power failure / single phasing / others. |
| 24 | Overload Protection - Fully loaded with overload protection. On overloading the lift car will not start with door remaining open and give audio & display indication |
| 25 | Emergency lighting and Fan in car- Battery (FR Type) operated emergency lighting and fan in the lift car. |
| 26 | Intercom system : Battery operated intercom system in Lift Car, Machine Room & Control Room |
| 27 | Closed loop Control System, protection against power fluctuation, self diagnostic control, Landing doors 2 hours Fire rated, Overload detection and protection, Overspeed Governer, Dot Matrix LED D & P Indicators In Car &Landings, BMS Compatibility, tamper proof infrared curtain covering almost the entire height of the lift car door, Alarm horn, Anti Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable NVR and HDD for 30 days storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with battery backup for fan and light fitting for 1 hour, pit ladder. |
| 28 | The lift doors shall have a vision panel to enable persons with hearing impairment to signal for help or assistance in the event of an emergency. |
| 29 | An appropriate technological support be provided (Through emergency messaging |services or alarms etc.) to respond to the emergency requirements of person with hearing impairment or deafness. |
| 30 | In case of failure of ARD or other electronic devices, a provision of manual rescue be provided. |
| 31 | Emergency Alarm: Dry maintenance free battery (FR Type) operated alarm bell system in lift car and control room |
| 32 | Fire Safety: (i) Fireman's switch - Fireman switch at main landing terminal.(ii) All doors such as landing doors & car door(s) must be of minimum 2 (two) hours fire rated. |
| 33 | Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator. |
| 34 | Main power transmission media : Wire Rope / Belt - As per manufacturer's standard conforming to IS |
| 35 | DIMENSION OF SHAFT: |
| 36 | Available Shaft Dimension 2350 mm (Wide) X 2950 mm (Depth) |
| 37 | Pit Depth : 1550 mm (Bidder should visit the site) |
| 38 | Overhead : 4800 mm |
| 39 | POWER SUPPLY & EARTH CONTITUITY: |
| 40 | Electric power supply at AC 415 Volts+10%, 3-phase, 50 Hz, 4 Wire System including suitable Earthing continuity from dedicated Earth Electrodes terminated in machine room as per standard requirement. |
| 41 | CCTV & COMMUNICATION: |
| 42 | Provision for CCTV interface in CAR & Lift room. |
| 43 | External monitoring system through MOD BUS RS485/ TCP IP Ethernet and IOT based communication system from control panel of the lift upto plug & play device installed at lift machine room or designated location for remote monitoring of the lift operation including display of instantaneous parameters such as voltage, currents, power, Energy, power factor etc and recorded parameters such as nature of fault, breakdown history, maximum load with date & time stamp, maintenance (PM) dates etc and generating reports from remote PC based server system. |
| 44 | (Caterory - I, Make : OTIS / KONE / SCHINDLER) |
| 45 | Other works: Necessary cutting of wall/floor for fixing the Fire Alarm switch , all Button switchs and also making provision to entry of rope , electri wire etc. as required to complete the job. |
| 46 | i) The agency must procure the materials from the manufacturer / OEM or from their authorised sales channel so that the standard warranty / support the manufacturer / OEM becomes applicable to the products to be delivered and installed by them. |
| 47 | ii) Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support shuld be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-charge and hard copy of it to be submitted during execution,of work / submission of bill. |
| 48 | iii) Defect Liability Period - 03 (Three) years after commissioning |
| 49 | iv) Rate should be quoted with minor civil works, wall cutting and mending good the damages to the original finish. |
| 50 | v) If any refurbished material is supplied and installed, penal action will be taken as per existing rules. |
| 51 | Rates should be quoted inclusive of all taxes & duties and L.W.C. @ 1% as applicable. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender