Tender For Replecement Of Old And Faulty Main Incoming And Distruibution Panel Installed At Kanjhawala Pumphouse Olb Ac-08.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Aug 2026
4 days left
EMD
21700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replecement Of Old And Faulty Main Incoming And Distruibution Panel Installed At Kanjhawala Pumphouse Olb Ac-08.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of old main distribution panel including removing of all electric connections while taking all safety precautions and cutting of old rusted nuts and MS bar with help of electric cutter/ manual labour including excavation of soft / hard soil upto 100 mm and making the surface even for laying foundation for new panel as per site requirement. |
| 2 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement for the base of main incomer distribution panel, including cement slurry as per directions of engineer in charge and site requirement |
| 3 | For main incomer distribution panel. Supply / Fabrication of LT Panel Board cubical type, floor mounting, dust & vermin proof construction, of the minimum size 3000 mm X 2000 mm X 375 mm, suitable for indoor fixing, made out of 16 SWG CRCA sheet (frame of 14 SWG), having chambers suitable to switch gears to be fitted as below with provisions for cable entry from bottom. The panel should have separate cable alleys and bus bar alleys. It should be suitable for operation and maintenance from the front and having removable covers at the back and having doors complete with locks etc. at the front for each chamber. The rating of main bus bars has to be 800 Ampere for three phases and half for the neutral in Aluminium construction duly sleeved with phase indicating heat shrinkable Sleeves. It should be complete in all respect along with painted through powder coating process and all the switchgears as below (S.no 4 to 14) duly fitted / installed properly as per site requirement. |
| 4 | S/o Moulded Case Circuit Breaker (MCCB) of rating 630 Amp, Four Pole, 415 V, AC of breaking capacity of 36 kA or more with Spreader Link/ terminals. Make: Havells/Selec/ L&T/ Schneider/ DJB approved make |
| 5 | Supply of 4 pole onload changeover switch with enclosure, 630 A, 415 VAC. Make: L&T/Havells/Schneider/ABB/ DJB approved make |
| 6 | S/o Moulded Case Circuit Breaker (MCCB) of rating 400 Amp, Triple Pole, 415 V, AC of breaking capacity of 36 kA or more with Spreader Link. Make: Havells/Selec/ L&T/ Schneider/ DJB approved make |
| 7 | S/o Moulded Case Circuit Breaker (MCCB) of rating 200 Amp, Triple Pole, 415 V, AC of breaking capacity of 36 kA or more with Spreader Link. Make: Havells/Selec/ L&T/ Schneider/ DJB approved make |
| 8 | S/o Moulded Case Circuit Breaker (MCCB) of rating 125 Amp, Triple Pole, 415 V, AC of breaking capacity of 36 kA or more with Spreader Link. Make: Havells/Selec/ L&T/ Schneider/ DJB approved make |
| 9 | S/o PVC insulated copper flexible cable single core 50 sqmm. Make: Havells / Fort Gloster / ICC /DJB approved make |
| 10 | Supply of AMP Meter Digital 3 phase, 0-800 Amp. Make : L&T / AE / Sigma / C&S / DJB Approved |
| 11 | Supply of Digital Volt meter 3 phase 0-500 V. Make : L&T / AE / Sigma / C&S/ DJB Approved |
| 12 | SP MCB. 6A. Make L&T/ Schneider/ DJB approved make. |
| 13 | S/o Indicating Lamp, Led type Make: - IEC/ L&T/ DJB approved make |
| 14 | Installation of the new L.T. Panel at site including providing of the all material required for fixing the panel in the newly laid foundation including grouting and minor civil work as per satisfaction of engineer in charge. It also includes any left out items required for proper functioning of the panel and no extra payment will be made for any left out item. |
| 15 | Making the Required incoming power supply connections between main supply and new incomer panel by connecting the cable after relaying of cable and re thimbling of cable ends as per requirement. |
| 16 | Testing & commissioning of the new starter panels including testing for their manual/ automatic operations for the pumps as after making required configurations for the automatic operations in the starters. Testing of Starters at No Load and then at on Load. Testing of tripping system of starters as per requirement Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender