Tender For Addition / Alteration Of Sinh Yodha C Incl Allied Infra And Services Bffr Babina
Tender Value
2.66 Crore
Estimated cost
Bid Submission
04 Sep 2026
19 days left
EMD
3.42 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alteration Of Sinh Yodha C Incl Allied Infra And Services Bffr Babina
BOQ
| Sl. No. | Item Description |
| 1 | Note: (i) Please refer schedule 'A' notes before quoting the tender. (ii) Amount of Schedule of credit shall be deducted off line by the department. |
| 2 | Roughening of existing floor surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. And brushing neat cement slurry with 3.00 kg of cement per sqm etc complete all as specified and directed |
| 3 | Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 4 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and directed.Note :- Water proofing compound shall be measured and paid separately |
| 5 | Supply only integral water proofing compound complete all as specified and directed. |
| 6 | M&L applying water proofing treatment with the following(a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated.(b) After the application of approved bituminous primer the water proofing membrane minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyestered non woven fabric (weight not less then 150gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction including Aluminium paint complete all as specified and directed by engineer-in-charge.(c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane. |
| 7 | Taking up or down existing steel 15 mm dia bore tubing and connections including cleaning for refixing or removal to store complete all as specified and directed . |
| 8 | Taking up or down existing steel 20 mm dia bore tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 9 | Supplying, fixing, jointing and testing galvanised iron 15mm dia bore tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and directed. |
| 10 | Supplying, fixing, jointing and testing galvanised iron 20 mm dia bore tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and directed. |
| 11 | Fixing only old steel 15 mm dia tubing and connections obtained from taking down against item No 7.00 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and directed . |
| 12 | Fixing only old steel 20 mm dia tubing and connections obtained from taking down against item No 8.00 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and directed . |
| 13 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cuttingexceeding 10 cm but not exceeding 20 cm girth in brick walls complete all as specified and directed |
| 14 | Dismantling water tanks and removing to store of steel/PVC of capacity n exceeding 500 ltr complete all as specified and directed. |
| 15 | S&F 1000 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 16 | Fixing only old 500 ltr capacity rotational moulded polythene tanks(cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 17 | S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms), complete all as specified and directed |
| 18 | S & F 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and directed. |
| 20 | M&L, for PCC 1:2:4 type B-0 using 12.5 mm gradesd stone agg as in levelling course of floors of 25 mm thick complete all as specified and directed. |
| 21 | M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed. |
| 22 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc complete all as specified and directed. |
| 23 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and directed. |
| 24 | M & L Machine cut kota stone slab flooring 20-25 mm thick over and including 15mm thick cement screed bed in CM 1:6 laid laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completed. |
| 25 | M & L Machine cut kota stone slab flooring 20-25mm thick in riser of steps,skirting, dado & pillar over and including 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 26 | Demolition of PCC in any description and in any position etc complete all as specified and directed |
| 27 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. |
| 28 | M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed. |
| 29 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandt complete all as specified and directed. |
| 30 | M&L PCC type B1 1:2:4 (using 20mm graded curshed stone aggregate ) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 31 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and directed |
| 32 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and directed. |
| 33 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. Note:- stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 34 | S&F factory made single extruded WPC (Wood Polymer Composite) chowkhat for solid door & other Frames of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc. and fixed in position with MS hold fast/ lugs/SS dash fasteners/SS hinges of required dia and length complete as per direction of Engineer-in-Charge |
| 35 | Supply and fixing factory made uPVC white colour Three track and three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) including outer frame/track upto 1.50m height made of including outer size frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made and fixed in position with MS hold fast/ lugs/SS dash fasteners/SS hinges of required dia and length complete as per direction of Engineer-in-Charge. |
| 36 | S&F Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 37 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 38 | S&F aluminum anodized barrel tower bolts of extruded section & fixed 200 mm long etc complete all as specified and directed |
| 39 | S&F aluminum handles cast type anodized 125 mm size etc complete all as specified and directed |
| 40 | S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and directed.. |
| 41 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy. |
| 42 | S&F, in repair 300 mm, ordinary rat tail rod patttern springs includding roller and roller plate etc complete all as specified and directed |
| 43 | S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specified and directed |
| 44 | S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars dovetailed or welded etc complete all as specified and directed |
| 45 | Material and labour for Steel ventilator localy made Single shutter with top hung shutter including hinges, steel peg stay,and pressed stee frame suitable ( mosquito proof /glazed with glazing bars ) with including projecting type hinges non friction with handle and including hold fast and painting with one shop coat of zinc chrome primer complete all as specified and directed. |
| 46 | S&F 5.5 mm thick sheet glass, Ordinary quality and glazing in square exc 0.5 Sqm in each pane or glazing complete all as specified and directed |
| 47 | S&F 3 mm thick sheet glass, Ordinary quality and glazing in square n exc 0.5 Sqm with oil putty in each pane or glazing complete all as specified and directed |
| 48 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of a-pertare 1.180 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and directed. |
| 49 | M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 and complete all as specified and directed |
| 50 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and directed. |
| 51 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 and all as specified and directed. |
| 52 | M&L, preparing for new steel surfaces and applying two coats of synthetic enamel paint over one coat of rex oxide primer over 10 cm width or girth complete all as specified and directed. |
| 53 | M&L, preparing for old steel surfaces and applying one coats of synthetic enamel paint over 10 cm width or girth complete all as specified and directed. |
| 54 | S&F in repairs Vitreous chine wash down water closet pan (pedestal pattern), white (EWC) including plastic seat of same colour of Wc, closed pattern with flat bottom, and cover mild steel chromium plated hinging device complete all as specified and directed. |
| 55 | S&F in repair vitreous china squatting pan “ORISSA” pattern size 58X 44 (CM) star white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed. |
| 56 | S & F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star white with inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and directed. |
| 57 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed. |
| 58 | S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (Oval type) fixed on slab or counter erecting stand and waste pipe complete all as specified and directed |
| 59 | Suppy and fixing for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 60 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed. |
| 61 | S&F in repair 15mm bore fancy type chromium plated angle cock with flange complete all as specified and directed. |
| 62 | S&F in repair 15mm bore fancy type chromium plated bib cock long body with flange etc complete all as specified and directed. |
| 63 | S&F in repair brass CP mixer 15mm dia bore single lever basin mixer screwed down for iron pipe and fixed all as directed. |
| 64 | S&F in repair concealed stop cock fancy type CP cast copper alloy screwed down high pressure with crutch or buttor fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed. |
| 65 | S&F in repair PVC floor trap/Nahani trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed |
| 66 | S & F in repair CP Towel rail and complete all as specified and directed |
| 67 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union and fixed all as directed |
| 68 | S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 41\\" X 20\\" with bowl size 410x330x160mm complete all as specified and directed |
| 69 | S&F Aluminium peg set of five fixing with wall complete all as specified and directed |
| 70 | Demolition and breaking up drain pipes (Salt glazed ware, AC/PVC/CI or Reinforced concrete) set in cement mortar in floors or wall in 100mm dia meter complete all as specified and directed |
| 71 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts 110mm bore complete all as specified and directed |
| 72 | S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 73 | S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 74 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed |
| 75 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed |
| 76 | S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door complete all as specified and directed. |
| 77 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door. |
| 78 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed |
| 79 | M & L for complete removal of existing treatment from surface of wall all as specified and directed by the Engineer-in-Charge |
| 80 | M & L for applying water proof 2 mm putty on wall in 2 layer (each layer should be 1 mm)all as specified and directed by the Engineer-in-Charge |
| 81 | M & L prepration of newly wall surface and applying two coat of oil bound distemper all as specified and directed by the Engineer-in-Charge |
| 82 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces.complete all as specified and directed. |
| 83 | M&L, Preparing old plastered/unplastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed. |
| 84 | Demolition of brick work built in cement mortar complete all as specified and directed. |
| 85 | M&L brick work using sub class B bricks old size straight or curved on plan exc 6.0 M mean radius built in cement mortar 1:4 as in manhole/septic tank/soak well complete all as specified and directed. |
| 86 | All as per item ser No 85.00 above but except brick |
| 87 | Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and directed. |
| 88 | M&L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete sur faces of wall, even and smooth finish without using extra cement complete all as specified and directed |
| 89 | M&L rendering 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and directed. |
| 90 | M&L for rendering 15mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:4, complete all as specified and directed |
| 91 | M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and directed. |
| 92 | Dismantling of Roofs, floors reinforced(other than ground floors), beams, staircases, landing, chajjas and similar suspended work |
| 93 | Dismantling wrought iron or mild steel work of any description not otherwise provided all as directed and directed |
| 94 | Dismantling of timber scantling 40 sqcm and over for framed work and over in section, in any position |
| 95 | Dismantling of Asbestos cement (corrugated,semi-corrugated, etc.) sheets in roof coverings. |
| 96 | S & F MS steel work in tubular trusses and tubular posts, purlin including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to I.S.I 1161-1998 Grade St-240 complete all as specified and directed. |
| 97 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; Purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates of Fe-410-W (Gde-E-250 quality-A) (framed) etc complete all as specified and directed. |
| 98 | S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strngth of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw complete all as specified and directed. |
| 99 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 100 | M&L RCC type B-1 (1:2:4) (20 mm graded aggregate) as in slab supported on walls, beams ad colum s in floors, roofs landings balconies, canopies, deck slabs ad in shelves and the like. |
| 101 | Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping). |
| 102 | M & L for MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spiirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips quility conforming to complete all as specifed and directed. |
| 103 | Rolling and consolidating formation surfaces in cutting using Power roller 8 to 12 tonne. |
| 104 | M&L Soling 150mm ( or sub base) Thick with broken boulders or quarried stone, interstices filled, surface formed and rolling and consolidating formation surfaces in using Exc. 8 tonne & not exc. 12 tonne power roller required gradient and chamber |
| 105 | M&L for 150 mm thick in two layers, (75mm thick each layer)(compacted thickness) WBM with coarse aggregate of granite trap or basalt grading 2 (63 to 40mm) or of grading 3 (50 to 20mm) spread, rolled and consolidated to gradient material and camber required with 8& to 10 tonne power roller complete all as specified and directed by Engr-in-Charge |
| 106 | M & L Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.Unsurfaced water bound macadam. |
| 107 | M & L, applying evenly a priming/ tack coat on WBM at 10 kg per 10 sq metre, Paving bitumen. |
| 108 | M & L Bituminous premixed semi-dense asphaltic concrete 40mm thick consolidated thickness with 5.5% binder content by weight of total mix, rolling and consolidating formation surfaces in using power roller to required gradient and chamber. |
| 109 | Continuous brick edging with burnt old size clay bricks of sub class B having width equal to the width of the brick laid dry on rnd vertically. |
| 110 | Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject atter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. (Contd..../-) |
| 111 | Contd..../-M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. |
| 112 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 113 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified anddirected |
| 114 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 115 | M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH conforming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete with all accessories as specified & directed |
| 116 | one light point controlled by one switch. |
| 117 | one Celling fan point controlled by one switch . |
| 118 | one Exhaust fan point controlled by one switch .. |
| 119 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 120 | One 3 pin/ 5 pin switch socket outlet ,5 Amps on independent board . |
| 121 | All as per item Ser No 114.00 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continuous earth wire. |
| 122 | S&F switch piano flush button type 5 Amp single pole one way complete all as specified and directed. |
| 123 | S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and directed. |
| 124 | S&F switch piano flush button type 15 Amp single pole one way complete all as specified and directed. |
| 125 | S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and directed. |
| 126 | S&F ceiling rose surface polycorbonate PVC three terminal complete all as specified and directed. |
| 127 | S & F deluxe Fan Regulator electronic rotary, 5 step step type 240 Volt 50 Hz, complete all as specified as directed. |
| 128 | S&F Lamp holder capacity upto 100 watt with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete. Please Enable Macros to View BoQ information |
| 129 | S&F Lamp holder capacity upto 100 watt with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender