Tender For Welcome Maintenance In Offr Accommodation In Aor Of Age B/R-I Under Ge (East) Ferozepur Cantt
Tender Value
10 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
10 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance In Offr Accommodation In Aor Of Age B/R-I Under Ge (East) Ferozepur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar beding (but not backing),removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 2 | S&F white non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified and directed. |
| 3 | All as per item No 2 here-in-before but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 4 | M & L Glazed Ceramic coloured tiles 350 mm x 250mm x 7 mm/ 450x300x7 mm thick over and incl 10 mm thick rendering in CM 1:4 on vertical surfaces, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match colour of tiles complete all as specified & directed. |
| 5 | S&F Vitrified ceramic tiles 8-9 mm thick (square/ rectangular) polished light shade, area of each tile exceeding 0.36 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified and directed. |
| 6 | All as per item No 5 here-in-before but as in skirting over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 7 | M & L Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in 10mm cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed. |
| 8 | M & L for Granite (of any type) tiles 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in 15mm cement mortar (1:6) including grinding and polishing complete all specified and directed. |
| 9 | Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 10 | M & L Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, using WPC, surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 11 | M & L Rendering/plastering, 12 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 12 | M & L Rendering/plastering, 5mm thick in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling, complete all as specified and directed. |
| 13 | M&L for Cement base paint in two coats over a coat of cement wash on newly plastered surfaces of walls including preparation of surfaces, complete all as specified and directed. |
| 14 | M & L for White wash in three coats on newly plastered surfaces of wall including preparation of surfaces, complete all as specified and directed. |
| 15 | M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper, complete all as specified and directed. |
| 16 | M & L for White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and directed. |
| 17 | M & L for applying one coat of Oil Bound distemper on old surfaces of wall including preparation of surface, complete all as specified and directed. |
| 18 | M & L for applying one coats of white wash on old Ceiling surface including preparation of surface, complete all as specified and as directed. |
| 19 | M & L for applying one coat of Cement base paint over old surface of walls including preparation of surfaces, complete all as specified and directed. |
| 20 | M & L for applying two coat of white wash over old surface of walls including preparation of surfaces, complete all as specified and directed. |
| 21 | Hacking out old broken glass n. exe 1.5 SQM (any thickness size, quality of description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new one, complete all as specified and directed. |
| 22 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.50 Sqm each including cutting holes of appropriate size for insertion blocks of cement concrete for hold fasts, complete all as specified and directed. |
| 23 | All as per item No 22 here-in-before but size exceeding 1.5 Sqm & not exceeding 4 Sqm each, complete all as specified and directed. |
| 24 | Taking down shutter of any description exe 1 sqm and not exc 2 Sqm, complete all as specified and directed. |
| 25 | M & L Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc, complete all as specified and directed. |
| 26 | S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one or more rebates incl lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etc including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified and directed. |
| 27 | M & L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in bed blocks of hold fasts, coping etc including necessary form work complete all as specified and directed. |
| 28 | S&F 30mm thick, Flush shutters, solid core construction, with block board core, commercial type with one face is covered with deco rative face veneer with lipping/frame to match complete all as specified and directed. |
| 29 | S&F 35mm thick, 2nd class hard wood (Hollock), glazed and skelton shutters, open rebated and prepared to receive glass/ gauge etc divided in to squares with plain rounded mitered and rebated sash bars any numbers, fitted with cut and mitered beads for securing glass etc size of members as specified in clause 8.24 (a) of MES Schedule Part-I in Section-8, complete all as specified and directed. |
| 30 | M & L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed. |
| 31 | M & L solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in the frame at site complete all as specified in clause 8 B.2.1 of MES schedule Part-II (2004). |
| 32 | S&F Aluminium Anodised handles 150 mm long fixed to doors/windows all as specified and directed. |
| 33 | S&F Aluminium Anodised tower bolts 200 mm long fixed to doors/windows all as specified and directed. |
| 34 | S & F in repair door closer hydraulically regulated designation No .03, universal type, suitable for door shutters of 851 to 1000 mm in width and off weight between 61 to 80 Kg and fixed aluminum (extruded section) complete all as specified and directed. |
| 35 | S & F Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed Sliding door bolts 300mm long, stove enameled black with bright bolt not less than 12mm dia with & including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 36 | S&F in repair 300 mm Mild steel helical door spring including roller and roller plate, complete all as specified and directed. |
| 37 | S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing, complete all as specified and directed. |
| 38 | S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified , including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing, complete all as specified and directed. |
| 39 | S & F Mild steel, fixed type ventilaters with side hunge shutters including projecting type hinges with steel handle and steel peg stay, complete with sash bars, dovetailed or welded, complete all as specified and directed. |
| 40 | S & F Plain sheet glass 3mm thick, ordinary quality and glazing, fixed with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm, complete all as specified and directed. |
| 41 | S & F Wire cloth galvanised mild steel, 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed. |
| 42 | S & F in repair Wire cloth galvanised mild steel, 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed. |
| 43 | M & L Painting to new wooden or wood based surfaces of any description, over 10cm width or girth in two coats with synthetic enamel paint over a coat of pink primer including preparation of surfaces, complete all as specified and directed. |
| 44 | M & L Painting to new steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces, complete all as specified. |
| 45 | Preparation of old treated steel surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and directed. |
| 46 | Preparation of old treated wooden surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and directed. |
| 47 | S&F in repair Water storage tanks 1000 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank, complete all as specified and directed. |
| 48 | S&F in repair Water storage tanks 500 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank, complete all as specified and directed. |
| 49 | S&F Ball valve of PTMT 20mm bore, high pressure with polythene float and fly nut complete with aluminium rod, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 50 | S & F CI Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs, complete all as specified and directed. |
| 51 | S & F CI Gate valve, 15mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs, complete all as specified and directed. |
| 52 | S & F 15mm bore GI tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases, pinning in making good facing where required and pointing in cement mortar 1:3 to ends or edges for concealed water tubing used in brick wall and incl taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed. |
| 53 | All as per item above 52 herein before but 20 mm bore tubing, complete all as specified and directed. |
| 54 | S & F in repair Stop valve of cast copper alloy fancy type, chromium plated, 15mm bore, screwed down, high pressure with crutch or butter fly handle, complete all as specified and directed. |
| 55 | S & F in repair Bib tap of cast copper alloy fancy type chromium plated, 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 56 | S & F Swivel shower of CP brass any colour for fixing with 15mm pipe (Minimum weight 40 gms)., complete all as specified and directed. |
| 57 | S & F Looking mirror of selected quality beveled edge glass of size 600x450 mm and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers as in repairs, complete all as specified and directed. |
| 58 | S & F in repair Vitreous China wash down water closet pan (pedestral pattern), White (excluding fixing bolts, flushing cistern and flush pipe), with plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 59 | S & F single piece WC of size 365x655x765 with flushing cistern and connection pipe P or S trap (Closed pattern incl all necessary accessories like rag bolts, kit/gel gasket etc (including flushing cistern, pvc seat cover, jet and flush pipe complete all as specified and directed. Make :- cera, Parryware, somani. |
| 60 | S & F in repair central hole basin mixer for wash hand basin including all fittings ie including connection pipe as per manufactures specification complete all as specified and directed.(Make Cera/Parko/ESSCO/Prayag.) |
| 61 | S & F in repair Wall mixture 3 in 1 with provision of overhead shower complete with 115 mm long bend pipe on upper side, connecting legs and wall flange complete all as per manufactures instruction and as directed.(Make Cera/Parko/ESSCO/Prayag.) |
| 62 | S & F in repair Low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories and connecting to water pipe and EWC etc and fixed in repairs complete all as specified and directed. |
| 63 | S & F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed. |
| 64 | S & F in repair PVC connection 15 mm size PTMT nuts of length 450 mm fixed, complete all as specified and directed. |
| 65 | S & F 32mm Waste fittings/Coupling, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repair complete all as specified and directed. |
| 66 | S & F Towel rail 450 mm long of Brass Chromium plated 20 mm dia fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 170 gms), complete all as specified and directed. |
| 67 | Dismantling CI pipe/any type alongwith fittings of 100mm dia, below or above ground level, jointed in cement mortar and taking out, complete all as specified and directed. |
| 68 | S&F PVC rain water pipes 100mm bore including fixing to walls with MS clamps, complete all as specified and directed. |
| 69 | PVC (SWR) bend (any radius), 110mm bore, diminishing pieces or tapers (larger bore measured) jointed in cement mortar, complete all as specified and directed. |
| 70 | Taking down of roof plaster including old APP membrane on roof surface jointed and pointed in cement mortar complete all as specified and directed |
| 71 | M & L 10mm plaster in CM(1:4) finished even and smooth with using extra cement on bottom layer of batten roof with water proofing compound (in case of re placement of bottom layer tile) complete all as specified and directed. |
| 72 | M&L for water proofing treatment to roof surface including parapet wall comprising with the following course of treatment/ specifications form bottom to top:-(a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surfaceby forced application complete all as specified. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing.Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions.(ii) A minimum overlap shall be 75mm length wise and 100 mm width wise of polymeric membranes respectively and sealed all overlaps and joints as manufacturer's instructions. |
| 73 | M&L for two coat of aluminium paint over APP membrane complete all as specified and directed. |
| 74 | Demolition of brick work built in cement mortar of any specification and in any position, complete all as specified and directed. |
| 75 | M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius, complete all as specified and directed. |
| 76 | M&L All as per item 75 above here-in-before but using old bricks retrieved from demolition under item no 74 above here-in-before including cleaning and removal of mortar from old bricks, complete all as specified and directed. |
| 77 | M&L Brick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, complete all as specified and directed. |
| 78 | Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work, complete all as specified and directed. |
| 79 | S & F Mild steel curtain rod PVC powder coated with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs, complete all as specified and directed. |
| 80 | M & L for PCC (1:3:6) type C2 (20mm graded stone aggregate) 50mm thick as in plinth protection, complete all as specified and directed. |
| 81 | S&F 18mm thick Celuka plywood of grade 1 qualiity, one side pre lamination plain and other side plain white colour fixed with screws , solvent cement/adhesive to make cupboard shutters/ shelves including Dismantling of boarding, any description, fixed in any position with nails, complete all as specified and directed. |
| 82 | S & F Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw, complete all as specified and directed. |
| 83 | S&F in repair 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed, complete all as specified and directed. |
| 84 | S&F hollow PVC wall panelling prelam PVC sheet consisting of 5 mm thick plane colour PVC sheet design approved by Engineer - in -Charge inclusive of fixing on to wall including moulding end caps fixed with PVC sleeves and screw as required at site including Dismantling of boarding, any description, fixed in any position with nails complete all as specified and as directed, |
| 85 | M&L for providing and fixing gypsum board panel laminated with texture vinyl coated paper tiles of size 595mmX595mmX4-5mm thick as in ceiling having snap grid 600mmX600mm incl GI wall angle of size 24mmX24mmX0.43mm thick along with perimeter of ceiling, fixed to walls/partition with the help of nylon sleeves at 450mm centre to centre, suspending intermediate tee section of size 24mmX38mmX0.35mm thick suspended from soffit of ceiling at upto 900mm centre to centre or adjustable as required at site 4mm dia GI wire hangers/tightened with ceiling with the help of nylon sleeve/rawl plugs complete all fittings complete all as specified and directedS&F Gypsum board 6 mm thick in ceiling fixed with screw of size 60cmX60cm placed in ceiling including aluminium anodised snap grid frame 605X605mm for false ceiling including hanging arrangement including Dismantling of boarding, any description, fixed in any position with nails complete all as specified in clause 10.38.1 of MES Schedule Part-I complete all as specified and as directed by Engr-in-charge. |
| 86 | S&F PVC body toilet cabinet (box type) 600 x 450mm x 125mm size with mirror of selected quality glass having 5.5mm thickness and fixed to walls with screws and wooden/rawl plugs as in repair, complete all as specified and directed. |
| 87 | S&F in repair 1.00mm thick stainless steel plate racks of size 900X750X250 mm, complete all as specified and directed. |
| 88 | Taking down carefully existig copper/ alumn point wiring for light/ fan/ bell/ socket 5/15 Amp points complete with fitting and fixtures such as Switches, Sockets, Ceiling Rose, Lamp Holder and bracket fittings with Battens/ Conduits/ Wires and making good the disturbed surfaces of walls and roofs etc to match with existing surface complete all as specified and directed. |
| 89 | Taking down carefully unserviceable main switches and distribution boards (single phase or three phase) of any capacity with Isolators/ MCBs/ MCCBs complete all as specified and directed. |
| 90 | Taking down carefully old unserviceable sub main wiring and making good disturbed surfaces and matching with existing complete all as specified and directed. |
| 91 | M&L Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets and various sizes hylam sheets for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified and directed for following :- (a) One light/ fan/ bell/ Bldg security light point controlled by one single pole one way switch. Make of wire: KEI/ polycab/ havells |
| 92 | All as per item No. 91 as above but one 3 pin, 5 Amp, socket outlet on the independent board controlled by one single pole one way switch board complete all as specified and directed. |
| 93 | All as per item No. 91 as above but one 3 pin, 5 Amp, socket outlet on the same board controlled by one single pole one way switch board complete all as specified and directed. |
| 94 | All as per item No. 91 as above here-in-before but wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed. |
| 95 | All as per item No. 94 as above here-in-before but wiring with 4 sqmm copper cable and 4 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed. |
| 96 | S&F switch piano flush type, 5 Amp, single pole, one way, 240 volts complete all as specified and directed. |
| 97 | S&F Bell push switch piano flush type, 5 Amp, single pole, one way, 240 volts complete all as specified and directed. |
| 98 | S&F socket outlet flush type 3 pin 5 Amp ISI marked complete all as specified and directed. |
| 99 | S&F Switch piano flush type, 15 Amp, single pole, one way, 240 volts complete all as specified and directed. |
| 100 | S&F socket outlet flush type 2-in-1, multipurpose, 3 pin 5 Amp and 3 pin 15 Amp, 240 volts complete all as specified and directed. |
| 101 | S&F Ceiling rose surface type, 240 volts, 50 Hz, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. |
| 102 | S&F Lamp holder , 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. |
| 103 | S&F rotary Stepped type electronic fan regulator compatable for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, white in colour, duly ISI marked, complete all as specified and directed. |
| 104 | S&F 20W, 6500K, 4 feet LED tube light fitting, energy efficient, 240 volts, fixed on wall/ ceiling etc, complete all as specified and directed. Make: Baja/Elcov/Surya / havells |
| 105 | Fixing only LED tube light fitting any type any size retrieved from taking down wiring all as specified and directed. |
| 106 | S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified and directed.. |
| 107 | S&F LED sleeky bldg security light (Lens) fitting of 35 watts, 6000K, including suitable size bracket bend to shape complete with nuts and bolts of suitable size, duly painted with two coats of synthetic enameled paint and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire of size 23/00.0076 all as specified and directed.Make: Baja /Elcov/Surya/ Phillips |
| 108 | S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S. sheet, powder coated, partly embedded in wall, IP-43 protection, VTPN DB with 200 Amps rated bus bar, 4 way, 415 volts, vertical type, dust and vermin proof, suitable for incorporation of MCCBs/ MCBs, factory made and making good distrubbed surfaces with matching colour, complete all as specified and directed. |
| 109 | S&F Factory made sheet metal enclosures double door type made out of CRCA M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 12 way, IP-43 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly partially immersed in wall, factory made, including making good distrubbed surfaces with matching colour, complete all as specified and directed. Make:HPL/ havells/ Indoasian |
| 110 | S&F MCB SPN, 40A-63A, 240 volts, 10KA , complete all as specified and directed. Make: Havells/ schenieder/ legrand |
| 111 | S&F MCB SP, 6A-32 Amps, 240 volts, 10KA complete all as specified and directed. Make: Havells/ schenieder/ legrand |
| 112 | S&F Sub main wiring with two single core 2x6 sqmm PVC FRLS insulated and unsheathed stranded copper conductor alongwith PVC FRLS earth wire 6 sqmm drawn in existing steel/ PVC rigid conduit connected to main board complete all as specified and directed. Note : (Two number cable and one number earth wire shall measured together as unit length). |
| 113 | Supply & Fixing LED Post top latern light 20 Watt 230V AC Outdoor Type with high pressure die cast aluminum spigot, spun, aluminium powder coated top cover, aluminium PDC heat sink complete with driver, lamp bracket, opal PC diffuser and clear acrylic with IP 65 protection complete all as specified and directed.Make: Baja /Elcov/Surya/ havells |
| 114 | S&F in repairs of sheet metal enclosures 230 V single pole and earth enclosure with two pin & earth plug with socket complete including single pole MCB 20 Amps complete all as specified and as directed. |
| 115 | M&L in repairs Earthing complete with galvanished earth plate electrode of size 600 x 600 x 6.00 mm buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and galvanised iron or steel including earth work in any type of soil, GI funnel with GI mesh charcoal salt 15cm alternate layer and around the earth plate as shown in electrical plate no 3 of SSR Part I 2009, 20 mm dia watering pipe medium grade 1.70 mtr long GI protection pipe light grade 15mm dia from earth pit to main board including necessary pit 1:3:6 of RCC 1:2:4 type B1 re-inforced with 6mm MS bars centre to centre, 10mm dia handle, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender