Tender For Repairs To Plastering Joinery Tillings Periodical Services And Misc Wks Of 6 Vikas (Ravangla) Under Ge 867 Ews
Tender Value
34 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
8 days left
EMD
68000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Plastering Joinery Tillings Periodical Services And Misc Wks Of 6 Vikas (Ravangla) Under Ge 867 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and directed. |
| 2 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed. |
| 3 | M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed. |
| 4 | M & L rendering 10mm thick on fair faces of brick work or concrete surfaces in cement plaster (1:6) complete all as specified and directed. |
| 5 | M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in cement plaster (1:4) and rendering is to be finished even and smooth (without using extra lime or cement complete all as specified and directed. with water proofing compound. Note : WPC will be measured and paid separately. |
| 6 | M & L 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6) including taking down cement plaster of any description from stone/ PCC blocks taking down cement plaster of any description from stone/PCC block/brick walls incl raking out joints hacking for key, scrubing down with water etc complete all as specified and directed. |
| 7 | M & L 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) including taking down cement plaster of any description from stone/ PCC blocksTaking down cement plaster of any description from stone/PCC block/brick walls incl raking out joints hacking for key, scrubing down with water etc complete all as specified and directed. Note - WPC will be measured and paid separately. |
| 8 | Preparing newly plastered surfaces of wall and applying two coat of oil bound distemper over chalk whitining primer over 3mm thick layer of putty all as specified and as directed. |
| 9 | M & L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat or alkali resistan primer all as specified and as directed. |
| 10 | Supply only integral water proofing compound. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 12 | M&L Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cm (1:6) in flooring complete all as specified and as directed. |
| 13 | M & L Glazed coloured ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick backing coat in cm (1:3) as dados/skirting complete all as specified and as directed. |
| 14 | M&L non-skid colured ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cm (1:6) in flooring complete all as specified and as directed. |
| 15 | All as per item No.14 here in before but on vertical surfaces over and including 10 mm thick back coat in CM (1:3) complete all as specified and as directed. |
| 16 | M&L virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cement plaster (1:6) in flooring complete all as specified and as directed. |
| 17 | All as per item No.16 here in before but on vertical surfaces over and including 10 mm thick back coat in CM (1:3) complete all as specified and as directed. |
| 18 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and as directed. |
| 19 | M&L for 75mm thick cement concrete type D- 2, (1:4:8) (40mm graded aggregate) as in sub base to floors complete all as specified and as directed. |
| 20 | M&L 40 mm thick cement concrete type B-1, (1:2:4) (20mm graded aggregate) as in floors finished even and smooth using extra cement all as specified. |
| 21 | M&L for 75mm thick cement concrete type B- 2, (1:2:4) (40mm graded aggregate) as in plinth protection, path/steps complete all as specified and as directed. |
| 22 | S & F in repairs 600 mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 23 | Taking down Chowkhats or frames exc 1.5 sq.m but n exc 4 sq.m each with shutters (without taking off shutters from the frame) |
| 24 | Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters (without taking off shutters from the frames). |
| 25 | Taking down Shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified and directed. |
| 26 | Taking down Shutters of any description n exc 1 sq.m each complete all as specified and directed. |
| 27 | S & F 2nd class Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified. |
| 28 | S & F Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified. |
| 29 | S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 30 | S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified. |
| 31 | S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. complete all as specified. |
| 32 | Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. |
| 33 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 34 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 35 | S & F 2nd class hard wood Plain, framed, panelled shutters 30mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 36 | S & F 30 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 37 | S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified. |
| 38 | S & F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified. |
| 39 | S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 40 | M & L for Mild steel work as in guard bards for window frames confirming to Fe-290 Gde E-165 complete all as specified. |
| 41 | S & F 100mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified. |
| 42 | S & F in repairs 100mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified. |
| 43 | S & F 150mm size Aluminium handles, cast type, anodised. |
| 44 | S & F in repair 150mm size aluminium handles, cast type, anodised. |
| 45 | S & F 250 mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 46 | S & F in repair 250 mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 47 | S & F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed. |
| 48 | Hacking out old brocken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beeds. |
| 49 | S & F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane. |
| 50 | S & F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane. |
| 51 | S & F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane. |
| 52 | S & F in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 53 | M & L preparation of newly wooden surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of pink primer complete all as specified and directed. |
| 54 | Preparation of new or previously un-treated steel and iron surfaces of any description and in any position over 10 cm width or girth not other wise specially described and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 55 | M&L for preparation of old painted steel and iron surfaces of any description and in any position over 10 cm width or girth not other wise specially described and applying one coat of synthetic enamel paint (Corrugal/plain) complete all as specified and as directed. |
| 56 | M&L for preparation of old wooden surfaces of any description and applying one coats of synthetic enamel paint over 10cm width or girth complete all as specified and as directed. |
| 57 | M&L for complete removal of exisiting treatment on old plastered surfaces of walls and applying two coats of cement base paint over a coat alkali-resistant priming paint complete all as specified and as directed. |
| 58 | M&L for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of oil bond distemper over chalk whitining primer over 3mm thick layer of putty, complete all as specified and as directed. |
| 59 | M&L for preparation of old surfaces of ceiling and applying one coat of oil bond distemper complete all as specified and as directed. |
| 60 | M&L for applying one coat of road marking painting lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm wide with road markind water based paint white, including preparation of old/untreated surfaces complete all as specified and directed. |
| 61 | M&L for applying one coat of plastic emulsion paint on wall exc 10 cm wide including preparation of old/untreated surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
| 62 | M&L for applying one coat of plastic emulsion paint on wall exc 10 cm wide including preparation of old/untreated surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender