Tender For Repair / Maintenance Of Roof, False Ceiling & Other Connected Items At Subathu Under Ge Kasauli.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
20 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair / Maintenance Of Roof, False Ceiling & Other Connected Items At Subathu Under Ge Kasauli.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Section - I |
| 2 | Dismantling of old unserviceable sheet from any location and Supply and fixing of Pre-painted galvalume aluminuim zinc coating GI based corrugated steel sheet 0.50mm thick, conforming to IS-15961 of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws of length not less than 50mm, complete, all as specified and as directed.Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. |
| 3 | Dismantling of old unserviceable sheet from any location and Supply and fixing of Pre-painted galvalume aluminuim zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, ridges, flashing, eaves board valley gutter of any shape, cut to designed shape (Jhhallar) etc fixed with self tapping screws of length not less than 50mm, complete all as specified.Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. |
| 4 | Dismantling of old unserviceable sheet from any location and refixing in same or other location as in roof covering/cladding to wall, fixed with new self tapping screws of length not less than 50mm, complete, all as specified and as directed. |
| 5 | Material and labour for hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290-Gde E-165 complete all as specified and as directed. |
| 6 | Supply and fixed mild steel, rolled sections(channel, angle or tee sections) fixed independently cut to ordinary length as in post or struts in fencing,ladder etc. including cutting tops to shape as required , drilling holes, notching for wire etc. including flat iron fillets with nuts and bolts for securing chain link fencing including all necessary drilling, bolting or riveting etc conforming to Fe-410(Gde 250), complete all as specified and as directed. |
| 7 | Supply and fixing for 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified. |
| 8 | Demolition/dismantling in posts holes (or similar holes) each not exceeding 0.5 cubic metre, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 metre and good surface in soft/loose soil, complete all as specified. |
| 9 | Material and Labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in fixing of hold fasts, copings, bed plates,kerbs or mud stops, lintels upto 1.50m span, plinth courses , seismic and other bands and the like, finished the surface fair and even, including necessary form work complete all as specified and directed. Note- If reinforced concrete, reinforcement shall be measured and paid for separately. |
| 10 | Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) as in surface channels and drains, complete all as specified and directed. |
| 11 | Material and labour for preparing new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 12 | Material and labour for two coats of synthetic enamel paint on steel surfaces over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified and as directed. |
| 13 | Dismantling walls or ceiling boards (fibre,plup insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and as directed. |
| 14 | Material and labour for Providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design ( Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, at all heights complete all as specified and as directed. |
| 15 | Supply and fixing in repair, Prelaminated Medium density fibre board 18/19mm thick, interior grade pre laminated one side with decorative choice laminations and other side balancing white lamination, fixed to timber framework with screws as in walls panelling, almirah, kitchen cabinates etc, fixed in repair, complete all as specified and directed. |
| 16 | Material and labour for external teak wood lipping (decorative), 6mm thick of block board or veneered particle board/MDF fixed with nails leaping treated with french polish complete all as specified and directed. |
| 17 | Supply and fixing continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 40 mm complete all as specified and directed. |
| 18 | Material & Labour brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 and incl demolition of old brick work, complete all as specified & directed. |
| 19 | Material and Labour for dismantling of brick work and Brick work using brick work straight or curved on plan exceeding 6 metre mean radius, built in cement mortar (1:6) , complete all as specified.( Note- The serviceable bricks obtained under this item will be used after removing motar, cleaning the bricks with water, etc.) |
| 20 | Material and labour for rendering 15mm thick on fair faces of newly brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement, complete all as specified and directed. |
| 21 | Material and labour for rendering 15mm thick on fair faces of old brick work or concrete surfaces at any height incl walls, cornices, chajjas, sun shades etc. in CM 1:4 finished even and smooth without using extra cement and with or without water proofing compound (2% 0f cement content) (External surface) incl necessary using scafolding or shuttering and taking down old plaster, complete all as specified and directed.Note: If WPC used, then it will paid separately. |
| 22 | Supply only Integral waterproofing compound all as specified as per manufacturer instruction complete all as specified and directed. |
| 23 | Material and labour for untreated surfaces by applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 24 | Material and labour for Rendering 10mm thick on surface of any description of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement (Internal surfaces) including taking down old plaster, complete all as specified and directed. |
| 25 | Material and labour for for applying 3 mm thick (achieved in two coats) wall care putty of new undecorated plastered surfaces of wall complete all as specified and directed. |
| 26 | Material and labour preparatin of new / previously untreated surface walls & ceiling by applying two coats of oil bound distemper (OBD) on wall surfaces over a coat of primer complete all as specified and directed. |
| 27 | Supply and fixing harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and as directed. |
| 28 | Amount of credit of Rs. 390329.75 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender