Tender For Addn/Altn & Upgradation To Bldg New Npg Line Or Qtrs, Jcos Qtrs, Jcos Qtrs At Old Npg Line And Civ Qtrs, Jcos Qtrs At Hazipur Line Qtrs Under Ge (West) Delhi Cantt-10
Tender Value
4.11 Crore
Estimated cost
Bid Submission
02 Sep 2026
18 days left
EMD
4.86 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn & Upgradation To Bldg New Npg Line Or Qtrs, Jcos Qtrs, Jcos Qtrs At Old Npg Line And Civ Qtrs, Jcos Qtrs At Hazipur Line Qtrs Under Ge (West) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of reinforced cement concrete in roofs, floors (including any type of floor finishing / treatments), beams, staircases, landing, chajjas, Kitchen slabs, shelves, column, parapet wall, chimney and similar suspended work or any type (reinforment cut as required to facilitiate demolition), removal of rubbish beyond MoD land, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 2 | Dismantling of brick tiles or terracing tiles single layer on roof, removal of debris beyond MoD lands, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 3 | Demolition of mud phuska on roof slabs, any thickness including any type of roof treatments and removal of rubbish beyond MoD land, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 4 | Demolition of cement concrete (unreinforced) of any description and in any position not other specifically provided for and including sunken portion, removal of rubbish beyond MoD lands, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 5 | Demolition of brick work or stone/boulder masonry built in cement or cement lime mortar incl all quoins, arches, pillars,roof parapet walls, tiles, including Plaster works of any thickness and half brick works etc but excluding ashlars facings dressed stone work and Precast concrete articles, removal of rubbish beyond MoD lands, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and removal of rubbish beyond MoD land, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 7 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons, staircases, kitchen slabs etc., removal of rubbish beyond MoD lands, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 8 | Dismantling of PVC water storage tanks exc 250 & n.exc 500 ltrs capacity and removing from site, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 9 | Taking down Chowkhats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames), iron mongeries or fittings, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 10 | Taking down Chowkhats or frames exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 11 | Taking down Chowkhats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frames), iron mongeries or fittings, complete all as specified and directed. Note: Up to the height of 4 storey building. |
| 12 | Taking down Chowkhats or frames n.exc 1.5 sqm each, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 13 | Taking up or down 15 mm dia steel tubing and connection including cleaning for re-fixing if required, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 14 | Taking up or down 20 mm dia steel tubing and connection including cleaning for re-fixing if required, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 15 | Taking up or down 25 mm dia steel tubing and connection including cleaning for re-fixing if required, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 16 | Taking up or down 40 mm dia steel tubing and connection including cleaning for re-fixing if required, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 17 | Taking down eaves gutters and rainwater pipes, CI pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 18 | Dismantling wrought iron or mild steel work of any description not otherwise specifically provided or such as in railing etc., complete all as specified and directed.Note: Up to the height of 4 Storey Building. |
| 19 | Dismantling of any type of Brass / CP Bib tap , angle cock , mixer, stop/ angle valve, gate valve etc, complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 20 | Taking down of PVC tap / Angle cock / stop cock etc., complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 21 | Dismantling any type of trap including CI trap or PVC trap etc., complete all as specified and directed.Note: Up to the height of 4 storey building. |
| 22 | Dismantling boarding any discription fixed in any position with nails or hinges, complete all as specified and directed. |
| 23 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified and directed. |
| 24 | M&L 15mm thick rendering in cement mortar on fair faces of brickwork or concrete external surfaces, applied in two layers i.e. 1st layer of 10mm thick rendering in cement mortar (1:6) and 2nd layer (top) of 5mm thick rendering in cement mortar (1:4) mixed with WPC finished even and fair etc, complete all as specifies and directed.Notes :- (i) Rates of Scaffolding is included in this item. No extra payment will be done on this account.(ii) Height of building upto 4th story. |
| 25 | M&L Rendering 5 mm thick in cement mortar 1:3 on ceiling concrete surfaces, finished even and fair without using extra cement, complete all as specifies and directed. |
| 26 | Supply only integral water proofing compound (ISI marked) , complete all as specifies and directed. |
| 27 | M&L for two coats of oil bound distemper including preparation of new plastered surfaces over one coat of alkali resistant primer & including 1mm thick wall care putty, complete all as specifies and directed. |
| 28 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash, complete all as specifies and directed. |
| 29 | M&L for preparation of newly plastered surfaces of walls and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specifies and directed. |
| 30 | M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing treatment by rubbing , brooming down, washing with water etc and providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specifies and directed. |
| 31 | M&L for two coats of oil bound distemper on old surfaces of walls by complete removal of old treatment & preparation of old surfaces over one coat of alkali resistant primer & including 1mm thick wall care putty, complete all as specified and directed. |
| 32 | M&L for preparation of old painted surface of ceiling and apply two coats of oil bound distemper on ceiling, complete all as specified and directed. |
| 33 | M&L for 18mm thick WPC Prelam board solid flush type selected colour fixed with necessary screws solvent cement adhesive to make timber frame work as in kitchen cabinet as per sample, complete all as specified and directed. |
| 34 | M&L for teak wood / PVC lipping fixed with nails to 18mm thick veneered particle borad including polishing, complete all as specified and directed. |
| 35 | S&F Continous (piano) hinges, 30mm mild steel, bright finish, complete all as specified and directed. |
| 36 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished, complete all as specified and directed. |
| 37 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and directed. |
| 38 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 39 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and directed. |
| 40 | S&F Stainless steel handles 100 mm size, ISI marked for kitchen cabinet shutters and bed room cub boards, complete all as specified and directed.Make: Hettich, Ebco, Inox |
| 41 | S&F Brass chromium plated tubular hanger rod 20 mm dia with suitable brackets, complete all as specified and directed. |
| 42 | S&F PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws, complete all as specified and directed. |
| 43 | S&F Mild steel framed work as in door or gates of angle or other sections, cooler stands, with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete conforiming to Fe 290 Gde E-165, complete all as specified and directed. |
| 44 | S&F 30mm thick Factory made wire mesh solid WPC door shutter consisting of Density 650 kg /cbm manufactured by an ISO-9001-2015 certified company, Door to be panneled with SS mosquito mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as oer IS:4020). The door should be water proof, termite proof, fire retardent and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm x 25mm x 2mm and 32 mm long steel screw drilled suitable to pass through other hardware shouldbe fixed with 19 x 6 mm size steel screw etc complete as per direction of Engineer-in-charge, manufacture's specifiecation and drawings \\"Note : Fixture/fitting shall be measured & paid separately) complete all as specifed and directed.Notes:- (i) Both SS mosquito and XTN aluminium mesh rates are included in this items and payment will be done under this item.(ii) SS hinges to fix door shutter with door frame will be paid under separate item.(iii) MTC and Screw out test will be provided by contractor. |
| 45 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separatel), complete all as specified and directed. |
| 46 | S&F aluminium anodised barrel tower bolt, ISI marked extruded section 200mm long and fixed with MS screws, complete all as specified and directed. |
| 47 | S&F 150 mm extruded aluminium alloy handle, ISI marked anodised fabricated type and fixed with MS screws, complete all as specified and directed. |
| 48 | S&F 200 mm extruded aluminium alloy handle, ISI marked anodised fabricated type and fixed with MS screws, complete all as specified and directed. |
| 49 | S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut, complete all as specified and directed. |
| 50 | S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar, complete all as specified and directed. |
| 51 | S&F Stainless steel butt hinges, ISI marked medium weight 100 mm size fixed with SS screws, complete all as specified and directed. |
| 52 | S&F Brass chromium plated magic eye, complete all as specified and directed. |
| 53 | S&F in repairs of floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 54 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or grith and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 55 | S&F in repairs 600x450mm beveled edge mirror of selected quality glass 5.5 mm thick mounted on and including two Nos. hanging clips, complete all as specified and directed. |
| 56 | S&F in repairs Sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever, brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed. |
| 57 | S&F 20mm CPVC pipes SDR 11, ISI marked with all plain CPVC SDR 11 and brass threated fittings (like elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. ) CPVC fittings and fixed complete to walls, ceiling or laid in floor, complete all as specified and directed. |
| 58 | All as per Srl item No 57 above but of 25mm dia. |
| 59 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting exc. 10cm but n exc 20cm girth in brick walls, complete all as specified & directed. |
| 60 | S&F Vitreous China wash hand basin (pedestal) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and waste pipe & waste coupling including all necessary fitting and fixtures, complete all as specified & directed. |
| 61 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing, complete all as specified and all as directed. |
| 62 | S&F Plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device, complete all as specified & directed. |
| 63 | S&F in repair PVC low level white flushing cistern valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified & directed. |
| 64 | S&F in repair Bib taps 15 mm bore chromium plated brass, fancy type, ISI marked with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. |
| 65 | S&F in repair Stop Valve /gate valve 20 mm dia cast copper alloy,ISI marked screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as specified & directed. |
| 66 | S&F in repair Angle valve / Stop cock fancy type, chromium plated brass, 15mm, , ISI marked complete all as specified & directed. |
| 67 | S&F in repair PVC connection 15mm dia and 60 cms long with two nos of brass nuts and washers, complete all as specified & directed. |
| 68 | S&F in repair Shower rose, chromium plated brass, fancy type, 125x125 mm, with or without swivel , ISI marked any size, including fixing to steel pipe or union, complete all as specified & directed. |
| 69 | S&F in repair Glass Corner Shelf 8mm thick including CP railing radius 250mm, complete all as specified & directed. |
| 70 | S&F in repair Kitchen plate rack, ISI marked with four shelves made out of stainless steel sheet 1mm thick over all size 90x80x25cm, complete all as specified & directed. |
| 71 | S&F in repair Stainless steel of AE-SI-316 grade towel rack of size 600mmx300mm including a pair of brass bracket complete all as specified and as directed. |
| 72 | S&F in repair Brass chromium plated tubuler towel rail 20mm dia D type ISI marked 60cm long between flanges including a pair of CP brass brackets, complete all as specified & directed. |
| 73 | S&F in repair Brass chromium plated soap dish, complete all as specified & directed. |
| 74 | S&F in repairs 25mm outer dia stainless steel decorative drapery rod (including necessary fittings) of thickness 20 gauge, for every 1 RM length provide 10 numbers stainless steel wings of 50mm dia and proportionate for part off with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod ar both ends, complete all as specified & directed.Note: The drapery rod shall be projected 150mm outer side from the closer opening of doors/windows. |
| 75 | S&F in repair stainless steel peg set of 6 peg, 45 centimeter long, complete all as specified & directed. |
| 76 | M&L for glazed ceramic tiles coloured of size 450mm x 300mm x7 to 8mm thick on vertical surfaces such as dados, skirting etc., set and jointed with approved adhesive,including 10 mm thick rendering cement plaster in 1:4 and pointed in white cement with pigment to match, complete all as specified & directed. |
| 77 | M&L for non skid colour ceramic rectified tiles 7-8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11Sqm, in floors etc, set jointed in neat cement slurry & pointed in coloured cement to match and including 15mm thick screed bed in cement mortar (1:6), complete all as specified & directed. |
| 78 | M&L for coloured 600X600mm ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified & directed. |
| 79 | All as per Srl item No 78 above but fixed on vertical surfaces/skirting including 10 mm thick rendering in cement mortar 1:4 |
| 80 | M&L for machine cut polished Kota stone 20-25mm thick as in floor, tread, pillar fixed with neat cement slurry over backing coat of 20mm thick in cement mortar (1:4) including rubbing and polishing, complete all as specified & directed. |
| 81 | All as per Item No. 80 above but in skirting/dado/riser over and including 10 mm thick rendering in cement mortar 1:4. |
| 82 | M&L for 16-20 mm Granite (any type) work (table rubbed and polished) in steps, jambs, pillars window-cill,cooking platforms and incl 15mm thick screed bed using marble dust with admixture in CM (1:4) with pointing and white cement (1:2) of pigment to match with shade of granite and incl reqd hole for gas pipe line, complete all as specified & directed. |
| 83 | M&L for cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 75 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement, complete all as specified & directed. |
| 84 | M&L for forming construction joint 75mm deepx10mm wide filled with sealing compound Grade A, complete all as specified & directed. |
| 85 | M&L for cement concrete 1:2:4 type B-I 20mm graded in roof kerb or mud slops, rounded or chamfered on edges, plinth courses, coping, kneelers, apex stone, kerb water tough and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work, complete all as specified & directed. |
| 86 | Dismantling water tanks exc 250 n. exc 500 Ltr, complete all as specified & directed. |
| 87 | S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),ISI marked triple layered hoisted and fixed in position all as specified in SSR Part I, complete all as specified & directed. |
| 88 | S&F in repair PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls 110mm mm dia ,in four storey building, complete all as specified & directed. |
| 89 | S&F in repair PVC (SWR) bends of any radius ( 110mm bore) including jointing with solvent cement, complete all as specified & directed. |
| 90 | M&L for brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified & directed. |
| 91 | M&L for brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan to any radius, half brick thick walls built in cement mortar 1:4, complete all as specified & directed. |
| 92 | S&F in repair Stainless steel gratings 75mm / 100mm bore size fixed with cement motar, complete all as specified & directed. |
| 93 | S&F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner, complete all as specified & directed. |
| 94 | Scraping old tar felt roof treatment over concrete padding of any thickness etc from roof including finishes or junction or parapet and cleaning the surface, complete all as specified & directed. |
| 95 | M&L for water proofing treatment to roof surface with APP polymeric based water proofing membrane 3mm thick & weighing not less than 3.0 Kg / Sqm of approved make, ISI marked black finish consisting of a central core of high molecular high density polyethylene film (HMHDPF) & reinforced with non woven polyester matt of min 150 gm/sqm with a thermo fusible finish laid over a coat of hot blown bitumen of 85/25 grade conforming to IS 702 @ 1.6 kg/sqm over a coat of an bitumen primer conforming to IS-3384 @0.4 Kg/Sqm prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing including applying a coat of cold emulsion bituminous primer complete as per manufacturer's instructions, complete all as specified and directed.Notes :- (i) Water proofing treatment shall be got carried out by the OEM or their authorised applicator only. Contractor will submit MoU with the authorised applicator and shall be approved by GE before commencement of work. OEM shall provide warranty of 05 five years for the waterproofing work.(ii) Bitumen primer, bitumen and membrane shall be of same make / manufacturer. (iii) The APP Membrane to be inserted in the parapet wall/wall by cutting chases of atleast 65mm X 50mm size& making good in CM 1:3. |
| 96 | M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) on roof padding with water proofing compound surface finished even and smooth without using extra cement, complete all as specified and directed. (Rate of WPC shall be included in unit rate) |
| 97 | M&L for providing Cement concrete 1:5:10 in filling of sunken portion type E2 using 40mm graded aggregate, complete all as specified & directed. |
| 98 | Dismantling of cast iron drain pipes, jointed in cement mortar and taking out of trenches, if required, Internal dia of pipe 100mm, complete all as specified & directed. |
| 99 | Dismantling of cast iron drain pipes, jointed in cement mortar and taking out of trenches, if required, Internal dia of pipe 75mm, complete all as specified & directed. |
| 100 | S&F 100mm bore cast iron soil waste or vent pipes in any length with or without ears with lead joints laid in trenches or in floors/ walls, complete all as specified & directed. |
| 101 | All as per item No. 100 above but 75mm bore of pipe. |
| 102 | S&F 100mm bore cast iron bends/T (any radius) diminishing pieces or tapers (larger bore to be measured) with oval access doors, complete all as specified & directed. |
| 103 | All as per item No.102 above but 75mm bore of pipe. |
| 104 | S&F 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches including oval access door, complete all as specified & directed. |
| 105 | All as per item No. 104 above but 75mm bore of pipe. |
| 106 | S&F CI Cowl for 100mm bore of CI pipe, complete all as specified & directed. |
| 107 | S&F Brass CP vertical mixer for mixing hot & cold water for wash hand basin, ISI marked screwed down for 15 mm bore iron pipe of ferrule, complete all as specified and directed. |
| 108 | S&F CP wall / sink mixer non telephonic type for mixing hot / cold water for shower, ISI marked screwed down for 15 mm brass iron pipe of ferrule, complete all as specified & directed. |
| 109 | S&F in repair ball valve high pressure of PTMT with epoxy coated aluminum rod and high density polythene float and flynut complete, screwed for iron pipe or brass furrule size 25mm bore. (Min weight 210gms), complete all as specified & directed. |
| 110 | M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate admixed with integral WPC and using extra cement, complete all as specified & directed. (Note: Supply only WPC shall be measured and paid for saparately.) |
| 111 | M&L for 10 mm thick cement plaster on brick/ concrete surface in cement mortar 1:3, finished even and smooth surface with out using extra cement but with & using water proofing compound at the rate of 2% of cement by weight.(Note: WPC shall be measured and paid saparately.) |
| 112 | M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound complete all as specified. (Note : WPC shall be measured and paid for separately under respective items) |
| 113 | M&L for 40mm dia GI pipe spout projecting at least 150mm beyond outer face of wall, complete all as specified & directed. |
| 114 | M&L for two component glass fibre reinforced acrylic modified cementious comprising one coat of polymer modified cemetious slurry, embedding the glass fibrewhile the fist coat is wet, followed by second coat to achiee minimum dry thickness of 2 mm, complete all as specified and directed |
| 115 | Supply only CP waste coupling 32mm size with PVC waste pipe, plugs and washers for kitchen sink, complete all as specified & directed. |
| 116 | S&F FRP chajjas of 450mm wide shitable for various openings including fittings and fixtures upto 4 storey bldg, complete all as specified and directed. |
| 117 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including brushing neat cement slurry with 3.0kg of cement per sq. metre, complete all as specified & directed. |
| 118 | Dismantling of brick tiles or terracing tiles single layer on roof etc., complete all as specified and directed. |
| 119 | M&L 32mm CPVC pipes SDR 11 , ISI marked with all plain CPVC SDR 11 and brass threated fittings (like elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. ) CPVC fittings and fixed complete to walls, ceiling or laid in floor, complete all as specified and directed. |
| 120 | S&F Galvanized iron water tubing, medium grade, 40mm bore, ISI marked with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 121 | S&F Vitreous china wash hand basin (flat black) white of size 450x300mm or as size directed by Engr in Charge excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size, complete all as specified and directed. |
| 122 | S&F Framed work such as grills, grating etc. with ends of bars shouldered and /or riveted , or forged into spikes; framed guard bars; barred iron doors; ladders, framed balusters; walkways, railings, framework of water tanks and similar works conforming to Fe290. Gde-E-165, , complete all as specified and directed. |
| 123 | S&F Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames,minus 5mm tolerance indimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 124 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames,minus 5mm tolerance indimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 125 | S&F aluminium anodised barrel tower bolt extruded section 150mm long and fixed with MS screws, complete all as specified and directed. |
| 126 | Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil and removing debrish beyond MOD land, complete all as specified and directed. |
| 127 | M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring, complete all as specified and directed. |
| 128 | M&L for machine pressed precast concrete interlocking paver block, ISI marked any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade laid over 25mm thick sand cushion with grey cement and pigment, complete all as specified and as directed.(Note : Sand filling to be measured and paid seperately) |
| 129 | M&L for sand filling under floors for cushion bed to interlocking paver block, complete all as specified and directed. |
| 130 | Removing excavated materials beyond MOD lands and depositing where directed, complete all as specified and directed. |
| 131 | M&L for Preparation of new or previously untreated surfaces of steel or steel base surface of any description not otherwise described over 10cm width or grith and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 132 | M&L for 30mm thick WPC CNC designed / cutting jaffery having density 650 Kg/Cum and to be fixed in brickwork opening etc. near staircase. Complete all as specified and as directed. |
| 133 | S&F Outer frame 40mmx40mm with 1.3mm thickness, corner 45 degre cut & aluminum welded center mullion size 40mmx35mm also welded , fixed 5mm frosted glass EPDM rubber gasket with provision for fresh air fan, full system powder coating with pure polister coat of any shade install with SS screw rol plug pvc & silicone, complete all as specified and directed. |
| 134 | S&F Outer frame 40mmx114mm with 1.3mm thickness ,corner 45 degree cut & aluminum welded center mullion size 40mmx65mm also welded, shutter size up to 40mmx60mm 1.3 thickness 45degree cut mechanically joint with 6mm alen key bolt clamp , 12mm SS 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safety grill welded at both ends with 6mm SS 202 grade round bar as per site reqmt, the grill will be fixed in two portion, half lower portion grill will be open able/ lifted horizontally and fixed with hinges as per site reqmt, 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock , aluminum kobra hinges 2 nos per shutter , 40x18mm 45 degree cut & welded mosquito net shutter with aluminum 24 gauge mosquito net ss 75mm long hinges & pvc magnet , full system powder coating with pure polister coat of any shade install with ss screw roll plug PVC & silicone. Drg No CEDZ/TD-316 Chief Engineer Delhi Zone, complete all as specified and directed. |
| 135 | M&L for Outer frame 40mmx114mm with 1.3mm thickness ,corner 45 degree cut & aluminum welded center mullion size 40mmx65mm also welded, shutter size 40mmx60mm 1.3 thickness 45degree cut mechanically joint with 6mm alen key bolt clamp , 12mm SS 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safety grill welded at both ends with 6mm ss 202 grade round bar, 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock , aluminum kobra hinges 2 nos per shutter , 40x18mm 45 degree cut & welded mosquito net shutter with aluminum 24 gauge mosquito net SS 75mm long hinges & pvc magnet , full system powder coating with pure polister coat of any shade install with ss screw rol plug PVC & silicone Drg No CEDZ/TD-316 Chief Engineer Delhi Zone, complete all as specified and directed. |
| 136 | M&L for rendering 15 mm thick in cement mortar 1:6 on internal surfaces of brick work or concrete surfaces , finished even and fair without using extra cement. complete all as specified and directed. (Note:- height of building upto 4th story.) |
| 137 | M&L for 10 mm thick cement plaster on brick/ concrete surface/roof slab in cement mortar 1:4 but with using water proofing compound at the rate of 3% of cement by weight.(Note: WPC shall be measured and paid for seperately under respective items.) |
| 138 | Impregnating cream for injection into masonary or concrete wall 230mm thick against capilary rising humidity. Rising bar super strong, complete all as specified and directedMethod of ApplicationMethodology(a) The surface must be sound , absorbent, clean, free of dust, oil, paint, curing agents , loose cement or lime plaster & concrete, debris, or any separation layers.(b) The plaster must be knocked off at least 50cm beyond the visibly penetrated area.(c) Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. All sharp edges/joints need to be levelled ; loose concrete to be removed.(d) Drill boreholes at ground level horizntally. The boreholes are drilled horizontal into the masonry. (e) The holes should be drilled until a depth of approx 5cm (for a 6cm thick wall) before the end of the wall is reached. The boreholes should have a diameter of 12mm upto a maximum of 15mm and should be spaced approx 100-120mm apart and the vertiacal offset is 6cm maximum(f) Before inserting rising bar super strong or equivalent the boreholes must be clean from boring dust by using air pressure. It is not necessary to pre-wet the boreholes. (g) For applying of rising bar of super strong or equivalent the dosing system inserted as far as possible into the bore holes. While dosing the product uniformly, the injection nozzle is pulled out leading to a completely filled boreholes(h) Treatment of highly absorbent masonary mught required repeated filling of the boreholes. depending upon extent of damage, rising bar superstrong or equivalent can be re-injected into the same hole after 24 hrs. depending on observency, application or masonry thickness 0.1 to 0.15 ltr/m with 10cm wall thickness. |
| 139 | S&F in repair stop valve 15mm bore fancy type chromium plated, with long shank and cup (concealed type), complete all as specified and directed. |
| 140 | S&F in repairs CI floor trap including jointing to waste pipe in run lead with dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as directed. |
| 141 | M&L for use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete, complete all as specified & directed. |
| 142 | M&L for RCC M-25 design mix cement concrete (20mm graded aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs and in shelves and the like, complete all as specified & directed. |
| 143 | S&F TMT bars 10mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified & directed. |
| 144 | S&F Stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized iron staples including wooden beadings, complete all as specified and directed. |
| 145 | M&L for chipping of unsound / weak concrete material of 75mm average thickness from slabs, beams, columns etc. with manual Chisel and or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts, complete all as specified and directed. |
| 146 | M&L for cleaning of reinforcement from rust from the reinforcing bars up to 20mm dia to give it a total rust free steel surface by using alkaline chemical rust remover of approved make Fosroc Reebaklens RR with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water, complete all as specified and directed. |
| 147 | M&L for providing mixing and applying over reinforcement bars zinc antirust agent as per specification of Make 'Fosroc Nitozinc Primer STD Base' Epoxy Zincrich Primer, complete all as specified and directed. |
| 148 | M&L for providing, mixing and applying bonding coat of Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make \\"Fosroc\\" the Nito Bond EP Chemical or Equivalent of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge, complete all as specified and directed. |
| 149 | M&L for cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast if required, complete all as specified and directed. |
| 150 | M&L for shotcreting R.C.C. columns, beams and slabs etc. in layers 25-50mm thick (Total Thickness) in Grade M 25 with cement content not less than 330 kg per cum with approved design mix concrete having the specified minimum characteristic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of centering and shuttering at edges and corners etc. as directed by Engineer in-Charge.Notes:- (i) Rates shall include the providing necessary ground wires etc.(ii) Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding. |
| 151 | S&F Mild steel TMT bars 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beams, slab etc. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 152 | M&L for Nozzle Fixing, Drilling 14 mm dia holes at honeycomb portions/voids/construction joints/cracks etc. for RCC members spaced at 200mm c/c bothways spacing and placing 12mm dia nozzle of length 75mm suitable for grouting into a 150 mm deep hole using polymer mortar including cutting of nozzle after the grouting and finishing with polymer mortar etc, complete all as specified and directed. |
| 153 | M&L for providing and injecting approved grout by steel nozzles in proportion recommended by the manufacturer into cracks/honey-comb area of concrete by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete all as per directions of Engr in Charge. (The payment shall be made on the basis of actual weight of approved grout injected). Epoxy injection grout in concrete / RCC work of approved make (a) Low viscous (200 CPS) Epoxy Resin like BASF Masterinject 1315/Nitofil UR63 of Fosroc 21 or equivalent material for R.C.C. columns etc, complete all as specified and directed. |
| 154 | M&L for providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of masonry by suitable gun / pump at required pressure including cutting of nipple after curing etc including M&L for Stirrer mixed Acrylic Polymer of approved make 2%of weight of cement used) modified Cement slurry made with non shrink compound in concrets/RCC work., complete all as specified and directed.Note :- The payment shall be made on the basis of actual weight of approved grout injected. |
| 155 | Providing and fixing chicken wire mesh at all joints of brick and concrete surface or in brick surface having cracks or in ceiling etc. with a minimum overlap of 150 mm in all directions, complete all as specified and directed. |
| 156 | M&L for Placing of U shape dowels in the brick masonry alternate at 300mm c/c both side as per the methodology, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 157 | M&L for Placing of U shape dowels in the brick masonry alternate at 300mm c/c both side as per the methodology, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender