Tender For Repair To Fencing, Gate Bdy Wall, Drain, Culvert Etc At Af Stn Bkt
Tender Value
18 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
10 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Fencing, Gate Bdy Wall, Drain, Culvert Etc At Af Stn Bkt
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15CM thickness below or above ground level and removing material from site ofm work complete all as specifed and directed. |
| 2 | Dismantling posts or struts embedded in any surfaces (natural, concrete, masonary etc.) and of any description, any section, taking out embedded portion and making good to disturbed ground surface , complete all as specifed and directed. |
| 3 | Dismantling of chain link fencing of any description complete all as specifed and directed. |
| 4 | Dismantling old rusted Galvanised 2 strand, steel barbed wire of any size and dia from wooden posts etc, complete all as specifed and directed. |
| 5 | Excavating in post holes (or similar holes) each n.exc0.5cum, getting out in soft/loose soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick and removing surplus soil to a distance n.exc.50m and making good surface, complete all as specifed and directed. |
| 6 | M&L for PCC (1:3:6) type C-2 using 40 mm graded mechanically crushed stone aggregate, as in foundation filling and mass concrete of post holes including necessary formwork etc. complete all as specified and directed. |
| 7 | S&F repair in framed work of angle iron or mild steel hollow pipe in grills, grating, gate etc., with ends of bars shouldered; Framing over fencing post with welded to each post, framed guard bars; barred iron doors; ladders; railings & similar work complete all as specified and directed. |
| 8 | S&F repair mild steel work as in flats to secure posts and struts in fencing/chain link fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 9 | M&L for rolled mild steel sections or MS pipe round/square as in posts, flat iron,channel, tee sections etc. fixed independently with cleats or other connecting plates, nut bolts etc. confirnimg to Fe-290 ( Gde E-165). |
| 10 | M&L for galvanized 2 strand, steel barbed wire, 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with & provision of galvanized mild steel wire, staples or steel pins etc (each line of wire to be measured), complete all as specified and directed. |
| 11 | S&F in repair galvanized concentrina coil of core wire dia 2.5 mm and barb thickness 0.5 mm any type blade , fencing dia 600 mm, straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with & provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and directed. |
| 12 | M&L for steel screw bolts, machine made, dia of neck 11 to 15mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 5 cm and not exceeding 10cm long, complete all as specified and directed. |
| 13 | M&L for mild steel round bars 6mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns, hooking ends and binding with mild steel (annealed) wire not less than 0.9mm dia, complete all as specified and directed. |
| 14 | Supply only chan link fencing of mild steel galvanised dia of wire not less than 3 to 4 mm thick complete all as specified and as directed. |
| 15 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, welding etc. including provission of binding wire complete all as specified and directed. |
| 16 | M&L for two coats of synthetic enamel paint on steel surfaces over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified and directed. |
| 17 | Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article complete all as specified and directed. |
| 18 | Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish work built in cement mortar etc complete all as specified and directed. |
| 19 | M&L for Brick work with old size fly ash bricks straight or curved on plan exc 6m nean radius and setting in cement mortar (1:6) complete all as specified and directed. |
| 20 | M&L for Brick work with sub class ‘B’ bricks (Except Bricks), straight or curved on plain exceeding 6 metre mean radius, built in cement mortar (1:6) complete all as specified and directed. |
| 21 | Taking down cement plaster on brick walls etc including racking out joints, hacking for keys in scrubbing down and washing with water etc complete all as specified and directed. |
| 22 | M&L for 15mm thick rendering on fair faces of brick work, concrete surfaces or stone walls in cement mortar (1:4) mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, complete all as specified and directed. Note : (WPC shall be measured and paid separately under relevant item of Sch 'A'). |
| 23 | Supply only liquid water proofing compound, ISI marked complete all as specified and directed. |
| 24 | M&L for preparation of new plastered surfaces of walls and applying two coats of white wash by air less spray machine (Machanical means) of any shade and with appropiate binder fevicol or equivalent complete all as specified and directed. |
| 25 | M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate) as in sub base/mass concrete and finished the top surface even and fair complete all as specified and directed. |
| 26 | M&L cement concrete using 20mm type B-1, (1:2:4) graded stone aggregate Nominal mix in flooring/pavement/ hardstanding etc. surface finished even and smooth without using extra cement including necessary formwork. Complete all as specified and directed. |
| 27 | M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' for 100mm to 150 mm thick cement concrete complete all as specified and directed. |
| 28 | M&L for forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound grade 'B' complete all as specified and directed. |
| 29 | M&L for PCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in copings, side of interlocking tiles including necesaary formwork etc. complete all as specified and directed. |
| 30 | M&L for one coat synthetic enamel painting on old painted road side kerb stone in alternate way such as yellow and black colour complete all as specified and directed. |
| 31 | Preparation of old paver block/ chequered tiles foors any pattern by brooming down or steel wire brushing for removing caked mud, trading oil and greasy spots, cleaning with water etc. and applying two coats glossy Indigo floor coat emulsion paint premium series complete all as specified and directed. |
| 32 | Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M deep and getting out in soft/loose soil complete all as specified and directed. |
| 33 | Surface excavation not excuding 30CM deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 34 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cms thick in hard / dense soil complete all as specified and directed. |
| 35 | M&L for removing excavated material not exc. 50 m and depositing in soft/hard soil, where directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender