Tender For Repair And Replacement Of Joinery, Plumbing, Sanitary Items And Other Connected Items In Zone-I At Mil Stn Samba
Tender Value
45 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
15 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Samba → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Replacement Of Joinery, Plumbing, Sanitary Items And Other Connected Items In Zone-I At Mil Stn Samba
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkat or frame with shutter (without taking off shutter from the frame ) area n exc 1.5 sqm each. |
| 2 | Taking down chowkat with shutter(without taking off shutter from the frame) area exc 1.5 sqm but n exc 4 sqm each |
| 3 | Taking down shutter of any description exc 1 sqm but not exc 2sqm each etc. |
| 4 | Taking down shutter of any description (Aluminium/wooden window) not exc 1 sqm each and refixing in same opening |
| 5 | Taking down shutter of any description (Aluminium/wooden door) exc 1 sqm but not exc 2sqm each and refixing in same opening |
| 6 | S & F 2nd Class H.W. plain solid straight chowkats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints. |
| 7 | S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 8 | S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., ,completle all as specified and directed by by Engr-in-charge. |
| 9 | M&L for preparation of new or previously untreated surface of steel or iron surfaces of any description over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer ,complete all as specified and directed by by Engr-in-charge. |
| 10 | Material and labour PCC 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate as in hold fast /back filling of chowkhat complete all as directed. |
| 11 | S&F for Factory made solid PVC moulded Door shutter, 28 to 30 mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick moulded coloured PVC sheet on front face & 2mm plane colour PVC sheet on back face, supplying & fixing in frame at site as per specification with particle board core. |
| 12 | S&F for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with m.s square tube supplying and fixing in opening as per specification . |
| 13 | S&F for Plain framed panelled shutter with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln seasoned and chemically pressure treated 35mm thick IInd class H.W rail and style. |
| 14 | M&L 35mm thick 2nd class H.W Glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc.(without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified in SSR Part I section clause 8.24(a) supplied and fitted to chowkats. |
| 15 | M&L Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer. |
| 16 | S & F Butt hinges, medium weight cold rolled mild steel and fixed 100mm long. |
| 17 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long. |
| 18 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm long. |
| 19 | S & F Aluminium handles cast type anodised 150mm long.. |
| 20 | S&F for Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long. |
| 21 | S&F for Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250 mm long. |
| 22 | S&F 300mm ordinary rat rail rod pattern spring including roller plate complete fixing mild steel spring. |
| 23 | Dismantling boarding, any description, fixed in any position with nails/ screws |
| 24 | M&L for Block board Gde-1 quality exterior grade commercial type fixed with screw to timber frame 18/19mm thick as in CB, shelf drawer etc (in narrow width nexc 15cm etc) 6mm thick external teak wood lipping fixed with nail. |
| 25 | S&F factory made 16 mm ((+) or (-) 1 mm) thick HDHMR high density board as cupboard shutter /shelvescomplete as per manufacturer's instruction individual member will be measured for payment purpose as directed. |
| 26 | S&F 30 / 40 mm flaps width continuous (paino) hinges mild steel brass bright finished or electrogalvanised |
| 27 | S&F Hasp and staple, 100 mm size safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws |
| 28 | S&F Aluminium handles,75mm size cast type, anodised wifed with cupboard shutters with suitable screws complete all as specified. |
| 29 | S&F Aluminium anodised, barrel tower bolts of extruded section of 100mm size and fixed with screws with cupboard shutters complete all as specified |
| 30 | S & F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 31 | S & F powder coated aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc. complete all as specified |
| 32 | S & F Powder coated aluminium door shutters fixed, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, handle two nos in each door hinges and powder coated snap beading snap beading, screws and necessary mongeries etc. complete all as specified |
| 33 | S&F Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS 1856 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existingwindow frame with CP brass/stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of engr-in-charge |
| 34 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-Charge. |
| 35 | S&F in repairs Stainless steel grade wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-Charge. |
| 36 | S&F sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm each pane 3 to 4 mm thick. |
| 37 | S&F sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm each pane 5 to 6 mm thick. |
| 38 | S&F Figured glass pin head type glazed with oil putty in squre n-exc 0.5 sqm in each pane 3 to 4 mm thick |
| 39 | S&F floor door stopper aluminium body with overall length 140mm |
| 40 | S&F in repair floor door stopper aluminium body with overall length 140mm |
| 41 | S&F in repairs Door Seal of aluminium body of overall height 30 to 40mm , not lessthan 1mm in thickness with sweeping strip fixed complete with suitable screws or nails all as specified and as directed |
| 42 | Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc. |
| 43 | M&L 10 thick internal plastering on fair faces of bricks or cone surfaces finished even and smooth w/o using extra cement in cm1:6. |
| 44 | M&L 15mm thick external plastering in two layers (10+5mm) in cm (1:4) mixing with water proofing compound on fair faces of bricks or cone surfaces finished even and smooth w/o using extra cement |
| 45 | M&L 5mm thick plastering on fair faces of bricks or cone surfaces finished even and smooth w/o using extra cement in cm1:3.on ceiling |
| 46 | Supply only integral water proofing compound. |
| 47 | M&L for Preparation of new surface of wall applying cement based putty 3mm thick on priming plastering surface and applying two coat of oil emulsion distemper on wall surfaces. |
| 48 | M&L for Preparation of new surface of wall applying three coats of white wash on wall surfaces. |
| 49 | M&L for Preparation of new surface of ceiling and applying two coat of oil emulsion distemper on ceiling surfaces. |
| 50 | M&L Preparing of new surface of plaster and applying three coats of white wash on ceiling. |
| 51 | M&L Preparing of new surface of wall and applying two coats of cement base paint on priming surface |
| 52 | S&F in repair fancy type curtain rod 20mm dia with heavy duty brackets, both of SS 304 grade including stops, rollers etc |
| 53 | Repair to existing steel windows / ventilators of area not exceeding 1.5 Sqm each , by providing missing iron mongeries including welding , painting , making in orginal shape , taking down and refixing with same openigs where necessary and making good all as specified and directed complete. |
| 54 | S&F Aluminium extruded section body door closer hydraulically regulated design no 3 universal type suitable for door shutter 851 to 1000 mm in width and weight between 60 to 80 kg. |
| 55 | Demolition of cement concrete (unreinforced) concrete in ground floors and paving n-exc 15cm thickness( below or above ground floors.) |
| 56 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises . |
| 57 | M&L cement concrete type B1 1:2:4 using 12.5mm graded stone aggregate 22 to 25mm thick as in flooring etc. |
| 58 | M&L non-skid ceramic coloured designer pattern tiles 400x400mmx7mm thick in floors etcset jointed in neat cement slurry and pointed in white cement or coloured cement to match etc including 15mm thick screed bed in CM 1:6. |
| 59 | M&L non-skid ceramic coloured designer pattern tiles 400x400mmx7mm thick but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete. |
| 60 | M&Lfor non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc, jointed in neat cement slurry and pointed in white cement or coloured cement to match etc including 15mm thick screed bed in CM 1:6. |
| 61 | M&Lfor non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete. |
| 62 | M&L glazed ceramic coloured designer pattern tiles 450mmx 300mmx7mm thick on vertical surface such as skirt, Dado etc set and jointed in white colour cement including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 |
| 63 | M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6. |
| 64 | M & L rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. |
| 65 | Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore . |
| 66 | Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 20mm bore . |
| 67 | Supply and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete icl necessary cutting / chasis on walls all as specified. |
| 68 | Supply and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 69 | S&F for CPVC 25mm Tank Adaptor |
| 70 | S&F for CPVC 25mm Ball valve |
| 71 | S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed |
| 72 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 73 | S&F for Bib taps chromium plated cast copper alloy with crutch or butter fly handle screwed for iron pipe or for brass ferrul and fixed 15mm bore fixed in repair. |
| 74 | S&F for in repair Angle stop cock with wall flange 15mm bore cast copper alloy |
| 75 | S&F Stop cock fancy type chromium plated with long shank and cup(Concealed type) screwed down high pressure with crutch or butterfly handle screwed bot ends for iron pipe or for union and fixed 15mm bore fixed in repair. |
| 76 | S&F in repairs 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank fancy type screwed for iron pipe and complete. |
| 77 | S & F in repair Tubular towel rail 20mm dia(d) type 60cm long between flanges aluminium anodised. |
| 78 | S & F health faucet with telephonic arm, cord and sprayer CP Brass in repairs including hose pipe of length 1 mtrs to 1.50 mtrs and mounting. |
| 79 | S&F fo in repair PVC waste pipe of 32/40 mm size flexible and 0.90 mtr long, fitted to basin or sink all as specified. |
| 80 | S & F in repair PVC valveless, syphonic action type flush tank , white, 10 litre capacity with inlet ball valve, float & handle incl brackets complete high level, flush pipes of PVC 32 mm dia for low lewel cistern, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm, 15mm CP angle stop valve fancy type etc complete all as directed |
| 81 | Dismantling water tanks and removing from site of capacity upto 1000 Ltrs |
| 82 | S&F 1000 Ltr capacity Rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including ball valve 20/25mm size, duly marked the date of fixing with white paint on visible face of newly fitted tank. |
| 83 | S&F 500 Ltr capacity Rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including ball valve 20/25mm size,duly marked the date of fixing with white paint on visible face of newly fitted tank.. |
| 84 | S&F for Ball valve PTMT high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed in repair 20mm bore fixed in repair. |
| 85 | S&F in repair PVC connection 15mm bore size with PTMT nuts of length 45cm. |
| 86 | S&F for Grating PTMT (Minimum weight 40gms) 150mm size fixed to repair. |
| 87 | Supply & Fix in repair vitreous china wash down water closet pan (pedestal pattern ), white connecting to trap and to flushing pipe front or back inlet etc complete all as specified and directed including seat cover. |
| 88 | S&F for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fix in repairs. |
| 89 | S & F in repair vitreous China squatting pan, ‘Orissa pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc.,completle all as specified and directed by by Engr-in-charge. |
| 90 | S & F wash hand basin in repair, white flat back size 550 x 400mm including 32mm brass chromium plated waste fittings, brackets, pillar tap swan neck 15mm, angle cock CP 15mm, PVC connection 15mm size with PTMT nuts of length 450mm including cutting for and pinning in ends of brackets for erecting stand etc.including PVC waste pipe etc complete all as specified and directed. |
| 91 | S & F in repair Brass chromium plated shower rose 125mm with 450mm arm complete all as directed |
| 92 | S & F PVC (SWR) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement |
| 93 | S & F in repair sinks made of stainless steel 1 mm thick kitchen or lavatory with plugs, washers and wastes; incl beeding in CM on dwarf wall or incl fixing cantilever brackets and connecting union to pipe, overall size 495x420mm bowl size 410x330x160mm including waste fitting brass CP 40 mm with long shanks and fly nuts and waste pipe 40 mm dia. |
| 94 | Dismantling cast iron drain pipes of dia 100mm |
| 95 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor. |
| 96 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floors |
| 97 | Supply and fix 75 mm PVC(SWR) Bend |
| 98 | Supply and fix 110mm PVC (SWR) Bend |
| 99 | S&F 600x450mm bevelled edge morror of selected quality glass, mounted of 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 100 | S&F in repair kitchen plate rack made of size 775x900x250mm of steel thickness 0.6mm including fixing with cantilever brackets all as specified and directed by Engr-in-Charge |
| 101 | S&F in repair 15mm Brass CP mixer (three in one faucet) for mixing hot & cold water including three joints to steel pipes or union and plugging and screwing to wall complete all as specified and directed |
| 102 | S&F in repair 15mm two way bib cock chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 103 | S&F in repairs 15mm dia brass chromium plated pillar tap mixer for mixing hot and cold water with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank fancy type screwed for iron pipe and complete. |
| 104 | S&F in repairs for ABS plastic body cabinet mirror of size 300x450mm and 150 mm depth having 3 to 4 compartment inside, soft close hinges or magnetic door closer incl proper hanging arrengments, fixing with CP screws on wall. |
| 105 | S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe ), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixingUnion for discharge pipe or waste pipe, complete all as specified. |
| 106 | S&F in repairs Vitreous china urinal partition white of size 310 x 700 mm about 40 cm above floor line. |
| 107 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified. |
| 108 | Material and labour for providing Reinforced Cement Concrete type A-1 (1:1.5:3) using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floor, roof, landing, balknies, conopies, decks, slab and in shelves and like all as specified and directed. |
| 109 | Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete as per specified |
| 110 | Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10cm but n exc 20cm wide. |
| 111 | M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified. |
| 112 | S & F Oval shape wash hand basin , white of size 560x410 mm , including 32mm brass chromium plated waste fittings, pillar tap swan neck 15mm, angle cock CP 15mm, PVC connection 15mm size with including properlly embedded into cutting portion of granite stone slab, jointing and pointing with white cement mixed with pigment to match the shade of stone etc.including PVC waste pipe, complete all as specified and directed. |
| 113 | Note:- The contract sum shall be arrived at after deduction of amount of Sch of credit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender