Tender For Repairs To Joinery, Sanitary Fittings And Pipelines, Wiremesh, False Ceiling, Glass Panes, Plumbing Works, Builders Hardware Etc To Md Accn Of Sol, Nol, C Ii, Inside Fort, Igoe And Otm Accn At Sol Under Ge Chennai
Tender Value
45 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
19 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery, Sanitary Fittings And Pipelines, Wiremesh, False Ceiling, Glass Panes, Plumbing Works, Builders Hardware Etc To Md Accn Of Sol, Nol, C Ii, Inside Fort, Igoe And Otm Accn At Sol Under Ge Chennai
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed. |
| 2 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed. |
| 3 | Taking down shutters of any description exc. 1sqm but not exceeding 2sqm each including builders hardware complete all as specified and as directed. |
| 4 | Taking down shutters of any description n.exc. 1sqm each including builders hardware complete all as specified and as directed. |
| 5 | M&L for Second class Hard wood, plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and as directed. |
| 6 | M&L for small articles such as hold fasts etc, of flat iron 25x3, grade confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 7 | M & L for Type C1 1:3:6 (20mm graded aggregate) for fixing of hold fast complete all as specified and as directed. |
| 8 | M&L for preparing wood and wood based materials, steel and iron work , new or old and treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sqm but n.exc 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and directed. |
| 9 | M&L for preparing small articles such as hold fasts, end of posts etc.,of area n.exc 0.1 sqm and treated with coal tar black paint etc complete all as specified and directed. |
| 10 | M&L for 35mm thick second class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 11 | M&L for 30mm thick second class hard wood Glazed and skeleton window shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed. |
| 12 | M& L for 40 mm thick flush door shutter, solid core construction , with block board core and plywood face panels, commercial type on both side etc. complete all as specified and as directed. |
| 13 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener complete all as specified and as directed. |
| 14 | S&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed. |
| 15 | S&F in repairs aluminium powder coated sliding window (for width 1.00 above and openable for below 1.50 M width) using aluminium section weighing not less than 0.900 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including aluminium anodised snap beads, screws and fixed along with same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wire mesh shutters) etc (The rate is inclusive of all fixings of builders hard ware such as wiremesh hinges, bow handles, locking arrangements etc complete all as specified and as directed. |
| 16 | S&F aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for doors/windows/ventilator/partition, glazing clips with one or more tracks including joining cleats for fixing complete all as specified and as directed. |
| 17 | Repairs to aluminium door of any description including removal and refixing after replacement of the defective builders hardware/section, glass pane, prelaminated particle board, hydraulic door closer, stopper etc, and making the good to the original position complete all as specified and as directed. |
| 18 | Repairs to aluminium window (sliding and openable), ventilator of any description including removal and refixing after replacement of the defective builders hardware/section, glass pane, peg stay etc, and making the good to the original position complete all as specified and directed. |
| 19 | S&F Anodised aluminium door shutters powder coating of any colour (Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified |
| 20 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid separately). |
| 21 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 22 | Supply and fixing factory made uPVC white colour fixed glazed window/ ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 23 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 24 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 25 | S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc.,complete all as specified and as directed. |
| 26 | S&F Aluminium handles cast type anodised 150 mm size complete all as specified and as directed. |
| 27 | S& F Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed. |
| 28 | S& F 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 29 | S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and as directed. |
| 30 | S&F Butt hinges, 75mm size medium weight cold rolled mild steel Etc., complete all as specified and as directed. |
| 31 | S&F Aluminium anodised barrel tower bolts, extruded section of size 100mm long complete all as specified and as directed. |
| 32 | S&F Aluminium handles cast type anodised 100 mm size complete all as specified and as directed. |
| 33 | S&F Butt hinges, 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21medium weight cold rolled mild steel Etc., complete all as specified and directed. |
| 34 | S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed. |
| 35 | M&L for applying two coat of Synthetic enamel paint over a coat of pink primer for wooden surfaces including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed. |
| 36 | S&F in repair Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed. |
| 37 | S&F Sheet glass 4.0mm thick, plain ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 38 | S&F Sheet glass 4.0mm thick, plain ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description ) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 39 | S&F 12mm thick Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed. |
| 40 | S&F 4.0mm thick, figured glass pin head type & glazing with oil putty in square n exc 0.5 sq.m in each pane from Aluminium section fixed with beads/glazing clips complete all as specified and as directed. |
| 41 | S&F in repairs Butt hinges, 75mm size medium weight cold rolled mild steel Etc., complete all as specified and as directed. |
| 42 | S&F in repairs Butt hinges, 100mm size medium weight cold rolled mild steel Etc., complete all as specified and as directed. |
| 43 | S&F in repairs Aluminium anodised barrel tower bolts of extruded section 100mm long all as specified. |
| 44 | S&F in repairs Aluminium anodised barrel tower bolts, extruded section of size 200mm long all as specified. |
| 45 | S&F in repairs Aluminium handles cast type anodised 100 mm size complete all as specified and as directed. |
| 46 | S&F in repairs Aluminium handles cast type anodised 150 mm size complete all as specified and as directed. |
| 47 | S& F in repairs Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed. |
| 48 | S& F in repairs Mild steel sliding door bolts, 300mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed. |
| 49 | S & F in repairs mild steel 300 mm , ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 50 | S& F in repairs 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 51 | S & F in repairs 18/19 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed. |
| 52 | M & L in repair 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorate face veneers on both faces; fixed with screws to timber frame work complete all as specified and as directed. |
| 53 | M & L for 6mm thick external teak wood lipping over 18/19mm thick particle board/plywood fixed with nails complete all as specified and as directed. |
| 54 | M & L 2nd class hard wood Plain fillets, square, rectangular or triangular in section, sectional area Exc 6 Sq cm n exec 13 sq cm clean sawn, secured with nails or brads complete all as specified and as directed. |
| 55 | S&F continuous (piano)hinges mild steel, bright finish or electro galvanised width of flaps (when open)in mm 30mm complete all as specified and directed. |
| 56 | S & F in repairs Magnet closures to cabinet cupboards complete all as specified and as directed. |
| 57 | M & L in repairs hasp and staples 150mm size aluminium anodised safety type with mild steel hinge pin including bolt to hinge plate with screws complete all as specified and as directed. |
| 58 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 59 | M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed. |
| 60 | Complete removal of existing roof treatment including vegetation and plants any type and demolition of cement concrete padding at roof slab n exc 15cm thickness and removal outside defence land complete all as specified and directed. |
| 61 | M & L for plain cement concrete 40mm thick average thickness as roof padding type B0, 1:2:4 (12.5mm graded aggregate) finished fair and even over concrete surface on roof top, and finished even and smooth with 10mm thick cement plaster in CM 1:4 mixed with WPC @ 200 ml per bag, when the concrete is green all as per manufacturer instructions and as specified and as directed. ( Note: Water proofing compound will be paid under measured separately) |
| 62 | Cleaning and preparation of newly plastered roof surfaces and applying the water proofing treatment as under.(a) Applying 1st course of bituminous (oil based) primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed.(b) Applying 2nd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 0 C and applied @ 1.2 kg/sqm.(c) Applying 3rd course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as per manufactures instructions. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, (e) Applying 5th course of a one coat of solar reflective aluminium paint @ 0.10 Litre/Sqm on roof surfaces complete all as specified and directed. |
| 63 | Taking down of existing cement or lime plaster along with the existing water proofing treatment on walls and applying 10 mm thick cement plaster 1:3 mixed with liquid Water Proofing Compound @ 200 ml per bag, cleaning and preparation of newly plastered wall surfaces and applying the water proofing treatment as under. (a) Applying 1st course of bituminous (oil based) primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed.(b) Applying 2nd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 0 C and applied @ 1.2 kg/sqm.(c) Applying 3rd course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as per manufactures instructions. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, (e) Applying 5th course of a one coat of solar reflective aluminium paint @ 0.10 Litre/Sqm on wall surfaces complete all as specified and directed. Note : WPC WILL BE MEASURED AND PAID SEPERATELY |
| 64 | Gl wire netting 0.90mm dia & 12mm mesh in patches of lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting & waste complete all as specified and as directed. |
| 65 | Dubbing out average 15mm thick on irregular face of walls in patches in CM (1:4) complete all as specified and directed. |
| 66 | M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 67 | M&L for rendering 5 mm thick using CM (1:3) on ceiling surfaces finished the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 68 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick in CM 1:6 and 5 mm thick in CM 1:4 incl water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY |
| 69 | Supply only Liquid water proofing compound complete all as specified and as directed. (Make SIKA/FOSROC/CHOKSEY) |
| 70 | M & L for Preparation of new plastered surfaces of wall and applying plaster of Paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as specified and as directed and as per manufacturer's specification. |
| 71 | M & L for Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 72 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed by the Engineer-in-Charge. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger. |
| 73 | M & L in repairs aluminium designer curtain rods (Draw berms rod) exterior grade 3 mm thick with holding clamps and fixed to wall PVC rawl plug and brass screws complete all as specified and as directed. |
| 74 | M & L in repairs for aluminium designer curtain rod brackets complete all as specified and as directed. |
| 75 | M & L for non skid ceramic coloured joint free tile in Patches 7 to 8 mm thick Concept tiles design as approved (Square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 76 | M & L for non skid ceramic coloured joint free tile in Patches 7 to 8 mm thick Concept tiles design as approved (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 77 | M & L for non skid ceramic coloured joint free tile in Patches 7 to 8 mm thick Concept tiles design as approved (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in skirting etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 78 | M&L for glazed coloured ceramic Concept designer tiles of 7mm thick and area exceeding 0.11 sqm and not exceeding 0.18 Sqm as approved by GE, fixed in vertical surfaces in Patches such as in dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thickcomplete all as specified and as directed. |
| 79 | M&L for Vitrified Ceramic light coloured tiles in Patches of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 80 | M&L for Vitrified Ceramic light coloured tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including backing coat in Cement Mortar 1:3, 10mm thick on fair faces of brick or concrete surfaces all as specified and as directed. |
| 81 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal outside defence land complete all as specified and directed |
| 82 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement complete as specified and directed.(Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and in every turning/ corners.) |
| 83 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, and removal outside defence land complete all as specified and directed. |
| 84 | M&L for flyash brick work straight or curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and as directed. |
| 85 | Demolition of Stone slabs and tiles of laid bedded and pointed in cement mortar or in any description or thickness in floors, platforms, aprons etc. and removal outside defence land complete all as specified and as directed. |
| 86 | M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick backing coat cement mortar (1 : 4) including pointing ,moulding the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 87 | Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed. |
| 88 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including pipe fittings and including taking up or down in the existing pipe line complete all as specified and as directed for pipe of 20mm outer dia. |
| 89 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including pipe fittings and including taking up or down in the existing pipe line complete all as specified and as directed for pipe of 25mm outer dia. |
| 90 | Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including pipe fittings and including taking up or down in the existing pipe line complete all as specified and as directed for pipe of 32mm outer dia. |
| 91 | S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs including dismantling of existing tank of any description and S&F 20 mm ball PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 92 | S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs including dismantling of existing tank of any description and S&F 20 mm ball PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 93 | M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 20 mm dia bore pipes complete all as specified and as directed. |
| 94 | M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 25 mm dia bore pipes complete all as specified and as directed. |
| 95 | S&F in repairs 15mm dia bib taps fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 96 | S&F in repairs for two way bib tap 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed. |
| 97 | S&F in repairs 15mm bore PVC bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and as directed. |
| 98 | S&F in repairs vitreous china wash basin white flat back size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, wastes chain and plug and porcelain stopper but including brackets and 32mm waste coupling and waste pipe complete all as specified and as directed. |
| 99 | S&F in repairs 15mm dia pillar taps fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed. |
| 100 | S&F in repairs 15mm bore pillar taps fancy type, standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms) complete all as specified and as directed. |
| 101 | S&F in repairs 15mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm-90gms) complete all as specified and as directed. |
| 102 | S&F in repairs 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 103 | S&F in repairs angular stop cock 15 mm dia brass chromium plated fancy type with long shank, screwed down high pressure with crutch or butter fly handle screwed down both ends for iron pipe or for union of make that shall match with existing fitting i.e, jaquar complete all as specified and as directed. |
| 104 | S & F in repairs Vitreous china wash down water closet (pedestal pattern ) white and fixed including Plastic seat cover, closed pattern with flat bottom, and cover and Mild steel chromium plated hinging device complete all as specified and directed. |
| 105 | S&F in repairs Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe) but including connections to flushing pipe and outgoing pipes complete all as specified and as directed. |
| 106 | S&F in repairs vitreous china wash basin of oval type including waste coupling, waste pipe and brackets etc complete all as specified and as directed. |
| 107 | S&F in repairs vitreous china wash down water closet pan, dual flush system cascade dual flush selected colour with built in cistern floor mounted type with P or S trap and matching seat cover including all fittings complete all as specified and as directed. |
| 108 | S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufacturer's instruction complete all as specified and as directed |
| 109 | S&F in repairs 15mm PVC connection 450mm long of superior quality complete all as specified and as directed. |
| 110 | Supply and fix in repair Brass CP 15mm wall mixer( 2-in-1) for mixing hot and cold water including provn of overhead shower, fancy type of Make : Prayag or its techno-commercial equivalent in other makes listed under Group -I here-in after complete all as specified and as directed. |
| 111 | S&F in repairs health faucet (hand shower with 1 M flexible tube with wall hook, chromium plated of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed. |
| 112 | S&F in repairs Sink made out of stainless steel 1mm thick with drainage board for kitchen and laboratory with plugs, washers and wastes, including beading in cement mortar to dwarf of including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size for 410mmx330mmx160mm including 40mm size CP waste coupling and PVC waste pipe complete all as specified and as directed. |
| 113 | S & F Stainless steel plate rack of size 24X36X10 inch fixed on wall with stainless screw with wooden plugs near the kitchen sink of make that shallmatch with existing fitting i.e., Prayag including all accessories and making good the disturbed wall tiles/concrete surface complete all as specified and directed. |
| 114 | Supply and Fix in repair looking mirror 600mm x 450mm bevelled edge on selected quality mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and framed with aluminium channel all round etc., complete all as specified and as directed. |
| 115 | S&F in repairs PVC waste pipe for wash hand basin (size 31/32mm x 800mm length)of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed. |
| 116 | S&F in repairs PVC waste pipe for Sink waste pipe (size 38/40mm x 1150mm length)of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed. |
| 117 | S&F in repair CP towel rail 20\\"(500mm long) of make that shall match with existing fitting i.e, Prayag complete all as specified and as directed. |
| 118 | S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. Minimum weight 40gms complete all as specified and as directed. |
| 119 | S&F in repairs 125mm Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. |
| 120 | S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints fixed to walls /floor as in spouts etc complete including dismantling existing pipes complete all as specified and as directed. |
| 121 | S & F PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls /floor complete as in spouts etc including dismantling existing pipes complete all as specified and as directed. |
| 122 | S & F PVC (SWR) bends with oval access door 110mm fixed in repairs complete all as specified and as directed. |
| 123 | S & F PVC (SWR) bends with oval access door75mm fixed in repairs complete all as specified and directed. |
| 124 | S & F PVC (SWR) vent cowl 110mm fixed in repairs complete all as specified and directed. |
| 125 | S & F PVC (SWR) junction single (single T ) equal or un equal with access door 75 mm fixed in repairs complete all as specified and directed. |
| 126 | PVC (SWR) junction single (single T ) equal or un equal with access door 110mm fixed in repairs complete all as specified and directed. |
| 127 | S&F in repairs Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gm) complete all as specified and as directed. |
| 128 | S&F in repairs Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed complete all as specified and as directed. (min. weight 20mm-210 gms) |
| 129 | M&L PCC 1:4:8, Type D2 (using 20 mm graded stone aggregate), 75 mm thick, as in sub base complete all as specified and as directed. |
| 130 | M/L sand filling under paver blocks including watering and consolidation complete all as specified and as directed. |
| 131 | M&L Machine pressed precast concrete interlocking paver block 60mm with Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed. |
| 132 | S&F for Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick, set, over Screed bed or bedding layer of mortar 15mm thk for laying floor finish in CM 1:6 jointed and pointed in neat cement slurry in floors Pattern, size and shade pointed with grey cement and pigment complete all as specified and as directed. |
| 133 | S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing galvalume sheets complete all as specified and as directed. |
| 134 | S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing galvalume sheets complete all as specified and as directed. |
| 135 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 136 | S&F Steel work FE-410 in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed. |
| 137 | Demolition of Wall and ceiling boards, wall panelling (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 138 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 139 | M & L for galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing with staples on snap grid by means of GI wires not less than 4mm dia hooks and raw plug etc centre of make GYPTECH/ARMSTRONG or equivalent complete all as specified and as directed. |
| 140 | Dismantling floor, hearth or wall tiling including cement mortar of existing backing coat and screed removing serviceable tile to store and rubbish off the premises complete all as specified and as directed. |
| 141 | Taking down cement plaster of any description on brick or stone walls or from concrete wall / ceiling surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender