Tender For Repair/Replacement Of Damaged Lt Overhead Acsr Conductor , Electric Poles And Connected Items At Jamshedpur Military Station Under Ge Ranchi.
Tender Value
1.14 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
6 days left
EMD
2290
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Singhbum → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Damaged Lt Overhead Acsr Conductor , Electric Poles And Connected Items At Jamshedpur Military Station Under Ge Ranchi.
BOQ
| Sl. No. | Item Description |
| 1 | M&L Steel tubular swaged poles complete with cast iron base plate,finial taper plug,bolts,nuts & screws as specified type 410 SP-31 ( 9.00 Meters long) complete all as specified and directed at site.Note : Excavation ,earth work & PCC work shall be measured paid separately. |
| 2 | Excavation of soft/loose soil in trenches not exc. 1.5 m wide and not exec 1.5 mtr in deep for foundation etc.or for shafts,wells,cesspits,mainholes,pierholes etc.in any type of soil for foundation and getting out and levelling of bottom surface to required level all as specified and directed by Engineer-in- Charge. |
| 3 | Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 4 | M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate in foundation mass concrete and filling including weathering slightly rounded or chamfered complete with necessary use and waste fo form work complete all as specified and directed at site. |
| 5 | Material and Labour restringing of LT ACSR OH line conductors up to permissible sag after dismantling the binding wires from insulators and jumper connections complete for the following and providing 4 wire only (three phase and neutral) with new aluminium conductor binding wire to insulators and Jumpers etc all as directed. |
| 6 | M & L for cross arms. Bracings supports, clamps and back plates fabricated from structural steel sections including nuts, washers, welding, bending cold or hot drilling holes for bolts in any shape or size as directed and inclusive of one primer coat, one under coat and one finishing coat of synthetic paint all as directed. |
| 7 | M&L in repalcement of aluminium conductor, steel reinforced off sizes including binding wire and jumper connect with PG clamp made out of aluminium alloy accodring to IS-617 complete all as specified and directed . |
| 8 | Material and labour for pin type porcelain vitreous white brown or green insulator including necessary galvanized mild steel spindle two galvanized iron washers and one galvanized iron nut 100 mm height, 65mm dia for 1100 volts grade volts grade |
| 9 | Dismantling & taking down LT PCC poles/struts complete and removal from site complete all as specified |
| 10 | Dismantling & taking down ACSR conductor of any size from LT over head line and removing from site complete. |
| 11 | Dismantling & taking down shackle/pin insulators of any size and type complete and removal from site complete. |
| 12 | Dismantling & taking down cross arm, channel, angles, flat iron various size/shape incl nut, bolt and washers etc complete and removal from site complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender