Tender For Special Repair Aluminium Joinery Work, Plumbing, Sentry Work Etc Complete Point Wearing With Fittings And Future To Bldg No T-41 And T-43 Of Ad Regt Under Age (I) Nabagram At Nabagram Military Station
Tender Value
12.92 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
12 days left
EMD
25900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Murshidabad → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Aluminium Joinery Work, Plumbing, Sentry Work Etc Complete Point Wearing With Fittings And Future To Bldg No T-41 And T-43 Of Ad Regt Under Age (I) Nabagram At Nabagram Military Station
BOQ
| Sl. No. | Item Description |
| 1 | Sch A Part-I : B/R PORTION:- |
| 2 | M&L 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes etc including demolition of old unserviceable concrete work, complete all as specified and directed. |
| 3 | M&L 18-20 mm thick Black granite stone as in cooking platforms, slabs for oval type WHB,sinks etc & the likes complete laid over 15 mm thick cement sand screed in cement mortar 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc including taking down the old unserviceable one complete all as specified and directed. |
| 4 | M&L virtified full body mat finished tiles 10 mm thick light shed, (square/ rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar (1:4) including dismantling of old unserviceable tiles with backing plaster complete all as specified and directed. |
| 5 | M&L virtified Ceramic tiles 10 mm thick light shed, single charged (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar (1:4) including dismantling of old unserviceable tiles with backing plaster, complete all as specified and directed. |
| 6 | All as per items No. 1.04 above but vertical surface as skirting incl 10mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado [colour and pattern as approved by AGE (I)] including dismantling of old unserviceable tiles with backing plaster, complete all as specified and directed. |
| 7 | M&L 15mm thick rendering in cement mortar 1:6 on stone masonry finished even and smooth without using extra cement including demolition of old unserviceable cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water complete all as specified and directed. |
| 8 | M&L two coat of cement based paint on new plastered surfaces over one coat of cement primer on wall & including preparation complete all as specified and directed. |
| 9 | Taking down chowkat with shutters (without taking off shutter from frame) size area n.exc1.50 sqm each complete all as specified and directed. |
| 10 | Taking down chowkat with shutters (without taking off shutter from frame) size area exc 1.5sqm but n.exc 4.0 sqm each complete all as specified and directed. |
| 11 | Taking down of steel window and ventilators complete all as specified and directed. |
| 12 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed. [Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.] |
| 13 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and as directed. |
| 14 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings, complete all as specified and directed. |
| 15 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 (minimum weight 0.55 Kg/Sqm), fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed. |
| 16 | S&F 5.5 mm thick tinted plan/frosted/black glass exc 0.5 sqm each pane complete fixed to aluminium frame work including rubber beading complete all as specified and directed. |
| 17 | Supply and installation of a frameless wall-to-wall glass enclosure comprising two (2) fixed panels and one (1) openable door using 12 mm thick clear toughened glass, including a 2-meter fixed glass track fabricated from Grade SS-304 stainless steel complete with heavy-duty SS-304 wall-mounting clamps and screws, two (2) standard geared rollers with end stoppers, a precision floor guide for 12 mm glass, a continuous water disperser, a Water Closet Profile (WCP) for the fixed glass, and a high-performance translucent magnetic seal profile; the assembly shall be fitted with a premium Grade SS-304 stainless steel Door Knob Set and thoroughly sealed with structural-grade silicone sealant to ensure a completely leveled, plumb, and watertight finish, complete all as specified and directed. |
| 18 | S & F aluminium extruded section door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed. |
| 19 | S&F in repairs mortice lock latch with two levers (Vertical type) mild steel body 100mm long with 2 No. keys and fixed complete all as specified and directed. |
| 20 | S&F powder coated aluminium grill (minium 50 microns) 10mm thick grill , minimum weight 3.44kg/Sqm of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and as directed. |
| 21 | S&F of stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of aperture 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters etc complete all as specified and as directed. |
| 22 | S&F in replacement of Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty & fixed complete all as specified and directed. |
| 23 | S&F in replacement Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed. |
| 24 | S&F in replacement of health faucet chromium plated including 8 to 12 mm dia, 1.2m long flexible SS metal tube attachment with wall hook and connection including hand set wall mounted type, complete all as specified and directed. |
| 25 | S&F in replacement of Grating doom 75 mm dia of Stainless Steel (SS-304)(minimum weight 80 gms) polished/ mirror/ Glossy finished, floor mounted (machine polished) fixed complete all as specified and directed. |
| 26 | M&L in replacement of 6 mm thick preminum grade bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and directed. |
| 27 | M&L in replacement for 75mm outlet diameter UPVC nahani trap (minimum weight 305gm), with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified and directed. |
| 28 | S&F in replacement of tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all specified and directed. |
| 29 | S&F in replacement of Vitreous China wash basin size 450 x 300mm without padestal, white, flat back, including 32 mm CP waste coupling, waste pipe, PVC Connection 300 mm long, brackets complete all as specified and directed. |
| 30 | S&F in replacement of vitreous china wash basin white circular/sqare/rectangular on table top, counter slab etc including brackets, 32mm bore CP coupling complete all as specified and directed. |
| 31 | S&F in replacement Single piece 1st quality premium-grade conforming to IS:2556 standard, integrated unit of floor mounted EWC with slim soft close seat cover complete set constellation dual flush (3/6 litre per flush, EWC, cistern & lid CON dual flush, soft close PP seat cover, cistern fitting (water saver-dual flush) 180mm P-trap, utilizing heavy duty stainless steel floor fixing arrangement, anti-fungal silicone joint sealant etc complete all as specified and directed. |
| 32 | Supplying and laying of 75 mm bore UPVC pipes SWR Type B (thicker walls) & Plain UPVC Type 'B' heavy duty, SN-4 fittings in trenches complete all as specified.(with all fitting) including dismantaling of old unserviceable pipes complete all as specified and directed. |
| 33 | Supplying and laying of 110 mm bore UPVC pipes SWR Type B (thicker walls) & Plain UPVC Type 'B' heavy duty, SN-4 fittings in trenches complete all as specified.(with all fitting) including dismantaling of old unserviceable pipes complete all as specified and directed. |
| 34 | Supplying and laying of 75 mm bore UPVC pipes SWR Type B (thicker walls) & Plain UPVC Type 'B' heavy duty, SN-4 fittings on walls/ceiling or laying in floor complete all as specified.(with all fitting) including dismantaling of old unserviceable pipes complete all as specified and directed. |
| 35 | Supplying and laying of 110 mm bore UPVC pipes SWR Type B (thicker walls) & Plain UPVC Type 'B' heavy duty, SN-4 fittings on walls/ceiling or laying in floor complete all as specified.(with all fitting) including dismantaling of old unserviceable pipes complete all as specified and directed. |
| 36 | S&F 75 mm bore UPVC bends any radius with oval acess door complete all as specified and directed. |
| 37 | S&F 110 mm bore UPVC bends any radius with oval acess door complete all as specified and as directed. |
| 38 | S&F for 100mm dia UPVC cowls, diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 39 | S&F GI tubing medium grade, having 20 mm bore Including all fitting (elbow, socket,tee with internal thread of brass) fixed on laid in trenches including demolition of old unserviceable GI tubing/CPVC complete all as specified. |
| 40 | S&F GI tubing medium grade having 15 mm bore Including all fitting (elbow, socket,tee with internal thread of brass) fixed on laid in trenches including demolition of old unserviceable GI steel/CPVC complete all as specified. |
| 41 | S&F of stop valves cast copper alloy (ISI marked) fancy type & chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for 20mm bore of iron pipe or union and fixed complete all as specified and directed. |
| 42 | S&F of Fancy type brass Chromium plated shower roses 125mm size with arm 195mm long with bend 45 degree, with or without swivel joints, 15mm bore, including fixing to steel pipe or union complete all as specified and directed. |
| 43 | S&F of Shower Panel with Anti-finger print stainless steel body equipped with a Movable ABS top shower complete, Brass Water Fall, 2 Nos. Movable ABS body massage jets, Hand shower with flexible hose, Brass Spout and a Thermostatic Mixer with diverter, the assembly shall include a 40cm stainless steel braided hose and 1.5m long stainless steel double locked flexible hoses including all necessary connections, fixtures and fastening arrangements, complete all as specified and directed. |
| 44 | Supply, installation, testing & commissioning stainless steel Vertical Shower Drain Channels (Linear/Long Floor Drains) with a side hole design engineered for handle large volumes of water and with each unit comes fully equipped with a matching Drain Cover, Tray, & Cockroach Trap (Size- 600 x 125 x 32mm) complete in all respects including required plumbing connections, joint sealants and finishing all as specified and directed. |
| 45 | S&F of angular stop valves cast copper alloy, chromium plated fancy type (ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union complete all as specified and directed. |
| 46 | S&F Pillar tap (Swan neck) 15mm bore , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 47 | S&F of premium-grade vanity bathroom wash basin cabinet set consisting of a water-resistant, durable, high-density fibreboard (HDF/WPC) or moisture-resistant marine plywood core framework cabinet with a minimum 10mm to 15 mm thick toughened / tempered clear or frosted glass counter top surface, including a top mounted designer vitreous China ceramic table top wash hand basin glossy, size 600mmx750mmx800mm coupled with heavy duty chrome plated (CP) brass accessories including a 32mm diameter CP Brass bottle trap with fully extendable wall pipe and flange, a premium CP brass pop-up waste coupler & necessary silicon / grouting at all joints to ensure a completely leak-proof installation, executed complete with all structural mountings, fixtures, wall brackets and fasteners as per the absolute satisfaction & direction of Engg-in-charge, complete all specified and directed. |
| 48 | S&F of a premium quality \\"Single-lever tall boy basin mixer\\" complete with a 150 mm extension body and a pair of 600 mm long flexible braided stainless steel inlet hoses. The faucet body and internal components shall be manufactured from high-grade, corrosion-resistant lead-free brass, featuring a flawless, multilayered chrome-plated finish and an eco-friendly water saving aerator, complete all as specified and directed. |
| 49 | S&F & commissioning of Wall-Mounted rectangular smart LED bathroom mirror size 350mmx800mm (Size: 14 inch x32 inch) made of minimum 5mm thick moisture resistant, copper free silver glass with polished/ frosted edges, integrated with energy-efficient LED back lighting (warm white, 3000K-3500K), IP-44, water proof LED driver and an integrated smart feather touch sensor switch on the front glass surface for ON/Off operation, complete with heavy duty anti corrosive mounting brackets, wall plugs, fasteners, wall plugs, fastener and internal wiring upto the electric terminal point all as specified and directed Smart Touch switch enables you to ON/ OFF the light complete all as specified and directed. |
| 50 | S&F of two way Bib cock, cast copper alloy, cromium plated, fancy type, 15 mm bore complete all as specified and directed. |
| 51 | S&F in repairs 15mm bore PVC connection 600mm long best quality with PTMT nuts complete all as specified and directed. |
| 52 | S&F of high quality ABS plastic, polished chrome finished, wall mounted health faucet with 1.25m long flexible PVC hose with material ABS, wall hook complete all as specified and directed. |
| 53 | M & L prep of the old surfaces of steel & applying one coat of synthetic enamel paint over 10 cm width or girth complete all as specified and directed. |
| 54 | M & L reinforced cement concrete M-25 (design mix ) (using 20mm graded stone aggregate) Walls, retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses incl demolition of old unserviceable concrete work all specified and directed. |
| 55 | S & F mild steel TMT bar 6 to 8 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed. |
| 56 | Use and waste for formwork to faces of walls flat,retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter with fair finished surfaces complete all as specified and directed. |
| 57 | M&L coloured glazed ceramic tiles Area exc .0.13 sqm but not exc .18 sqm as per IS 13712 Grade II(a) over and include15mm thick rendering in cement mortar (1:6) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado, Skirting (colour and pattern as approved by AGE) incl demolition of old unserviceable tiles work all as specified and directed. |
| 58 | Sch A Part-II (E/M Portion) |
| 59 | Taking down old unserviceable point wiring ( light/fan/socket/power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, pendants,regulators, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls, floors, ceiling etc.complete all as specified and directed. |
| 60 | M&L point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRL-SH cable 1100 volts grade, ISI - 694 marked, in PVC casing capping heavy duty ISI marked in wall/floor/roof surface including all accessories etc. with modular sunken boxes including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm FRLSH single core cable as earth and connecting to common earth dolly complete all as specified & directed for the following:-(a) One light point controlled by one switch complete all as specified and directed.[Note- (i) Cutting in chases and pointing in will be done by contractor without any cost.(ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost : complete all as specified and directed.] |
| 61 | All as per item No 2.02 but one fan point controlled by one switch complete all as specified and directed. |
| 62 | All as per item No 2.02 but one 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 63 | All as per item No 2.02 but one 3 pin 5 amps socket outlet point on same board with other switches complete all as specified and directed. |
| 64 | All as per item No 2.02 but one bell/buzzer point controlled by one bell push complete all as specified and directed. |
| 65 | All as per item No 2.02 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRL-SH cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable (FRLSH) as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board complete all as specified and directed.[Note:- Making good of disturbed surfaces will be done by contractor without any claims.] |
| 66 | M & L Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLSH cable with continuous copper earth conductor of 4 sqmm (FRLSH) in and including PVC casing caping incl accessories including taking down old unserviceable sub main wiring complete all as specified complete all as specified and directed.(Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 4 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.) |
| 67 | M & L Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLSH cable with continuous copper earth conductor of 6 sqmm FRLSH in and including PVC conduit incl accessories complete all as specified and directed.(Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 6 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.) |
| 68 | S & F modular switch 6A 1 module one - way 230V white/ ivory finish complete all as specified and directed. |
| 69 | S & F modular switch 16A 1 module one - way 230V white/ ivory finish complete all as specified and directed. |
| 70 | S & F modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed. |
| 71 | S & F modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed. |
| 72 | S&F bell electrical ding dong including hard PVC board ISI marked complete all as specified and directed. |
| 73 | S & F modular Bell push 6A 1 module complete all as specified and directed. |
| 74 | S & F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 75 | S & F ceiling rose surface backelite 65x50mm three terminals complete all as specified and directed. |
| 76 | S & F in replacement of wall mounted LED fancy night light fitting 10W made of aluminium and plastic, cool white/warm white IP-33 with shadow direction up/down prewired and all accessories complete all as specified and directed. |
| 77 | S & F Recess-mounting back-lit LED 2X2 36Watt tile in CRCA housing with full-opal diffuser suitable for Armstrong/Grid ceilings with revolutionary Flicker controlled technology to reduce harmful invisible flicker present in LED lighting sources complete all as specified and directed. |
| 78 | S & F LED lights fitting 1x 20W, 220V, AC surface mounting general purpose ultra slim economical LED battens in extruded PC housing and square shaped diffusers decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 79 | S & F LED based security light 35 W in aluminium pressure die cast housing with touched glass cover having IP 66 Protection and with aluminium bracket including taking down of old unservicable security light complete all as specified and directed. |
| 80 | S&F in repairs MCB TPN DB 4 way double door with 200 amps rated busbar 415 V, all wire connected MCB with help of lugs, all wire connected with meter is covered with flexible conduit and DB will be fixed concealed/surface with wall neatly etc complete all as specified and directed. |
| 81 | S&F in repairs MCB SPN DB 8 way, double door, with 200 amp rated busbar 240 V, complete all as specified and directed. |
| 82 | S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified and directed. |
| 83 | S & F for MCB double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified and directed. |
| 84 | S & F for MCB four pole of rated capacity 40/63 amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified and directed. |
| 85 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250/300mm including dismantling & fixing & making good with same colour & finished as before complete all as specified and directed. |
| 86 | M & L earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 4.0 mm dia earth lead wire by means of nuts bolts washers etc as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, galvanized iron pipe light grade 15 mm diameter for protection of earthing wire, (To be concealed in wall/floor) connected to earthing test point, all as shown in electrical plate No. 3 of MES Schedule Part I. , connected to earthing test point including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a PCC (1 3 6) type C1 using 20mm graded stone aggregate earth chamber ,40mm thick RCC cover type B1 (1 2 4 ) B1 using 20mm graded stone aggregate with 8 mm dia tor reinforcrment 100mm c/cand 12mm dia MS bar handle on top of cover on ground level, 20 mm dia GI watering pipe, funnel, testing etc. complete all as specified and directed. |
| 87 | Takingdown old unsv ceiling fan and Supply and fixing new ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.[Note- Old unsv ceiling fan to be deposited in E&M store yard of department.] |
| 88 | Taking down of electric water heater from wall of capacity 25 ltrs, dismantling/opening the same, servicing, cleaning and Supply & fixing & replacement of wornout heating element,thermostat, MS nut bolts, washers, clamps, suitable fastner for hanging and made functional fully assembling, connected and testing complete all as specified and directed. |
| 89 | Taking down of Split AC from wall of capacity 1.5/2 Ton, dismantling/opening the same, servicing, cleaning and after servicing refix again same place and testing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender