Tender For Rrd Under Pdna Damaged Scheme Sr. No. 733, Lwss Narag Nohra At Location 305003 N 771003 E Under Jsv Sub Division Narag In Tehsil Pacchad Distt. Sirmour (Sh:- Rapir Of Pump House Cum Attendant Qtr & Construction Of Retaining Wall To Protect The
Tender Value
5.43 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
0 days left
EMD
10875
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirmaur → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Rrd Under Pdna Damaged Scheme Sr. No. 733, Lwss Narag Nohra At Location 305003 N 771003 E Under Jsv Sub Division Narag In Tehsil Pacchad Distt. Sirmour (Sh:- Rapir Of Pump House Cum Attendant Qtr & Construction Of Retaining Wall To Protect The Pump House.) Eastimated Cost:- 543791- Earnest Money:- 10875/ Time:- 3 Months
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing pressed steel door frames manufacuted from commercial M.S Seats of 1.25mm thickness including hinges jump lock jamb lead and it required angle threashald of MS angle 50x25mm or less tie of 1.25mm pressed MS welded or rigidly fixed together by mechanical means adjustable longs with split and tails to each jamb including steel butt hinges 2.5mm thick with guards, lock strick plate and shock as specified and applying a coat of steel primer after pretreatment of surface as directed by Engineer-in-Charge. |
| 2 | Profile-B |
| 3 | Providing and fixing 40x3mm flat iron hold fast 40cm long including fixing to frames 10cm diameter bolts and nuts and wooden plug and embedded in cement concrete block 30x30x15cm in C.C. 1:3:6 ( 1 cement : 3 sand : 6 graded stone aggragate 20mm niminal size) including all leads, lifts and carriage of material and as directed by the Engineer Incharge. |
| 4 | Providing and laying reinforced cement concrete work 1:2:4 ( 1 cement :2 sand :4 graded stone aggregate 20 mm nominal size ) excluding cost of form work includiing all leads lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 5 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with M.S flasts square or rounded bars with rounded headed bolts and nuts or by screws plain grills. including all leads, lifts and carriage of material and as directed by the Engineer Incharge. |
| 6 | Providing &fixing 1 mm thick M.S. sheet door with frame of 40 mm x 40 mm x 6 mm angle iron 3.15 mm M.S.gusset plates at the junctions and corners, all necessary fittings complete including applying a priming coat of red lead paint including all leads,lifts and carriage of material at site and as directed by the Engineer in Charge. |
| 7 | Applying a priming coat over new steel and steel based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering and knotting, ready mixed paint brushing red lead , red oxide/ zink oxide chrome including all leads, lifts and carriage of material and as directed by the Engineer Incharge. |
| 8 | Painting one coat (excluding priming coat) on new steel and steel based surfaces with ready mixed paint brushing to give an even shade including clearing of all dirt, dust and other foreign matter sand paper and stopping:- with ready mixed paint other than white, including all leads, lifts and carriage of materials and as directed by the Engineer Incharge. |
| 9 | Cement concrete flooring 1:2:4 ( 1cement : sand : 4 graded stone aggregate 20mm nominal size) and laid in one layer finished with a floating coat of neat cement, 40mm thick including all leads lifts and carriage of material at site as as per the direction of the Engineer incharge. |
| 10 | 15 mm cement plastering in single coat on rough side of brick/stone masonary for interior plastering up to floor two level including arrises internal rounded angles of brick/stone masonary for interior plastering up to chamfers, and/or rounded angles not exceeding 80mmin in girth and finished even and smooth in C.M.1:6 (1Cement:6 Sand) |
| 11 | 6mm thick cement plaster to ceiling in cement mortar 1:3 ( 1 cement : 3 sand) including all leads , lifts and carriage of material at site and as directed by the Enginner Incharge. |
| 12 | White washing with lime on undecorated wall surface two coat to give an even shade including throughly brooming the surface to remove all dirt dust and other foreign matter including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 13 | Hiramachi colour wash on undecorated wall surface ( Two coats) to give an even shade including throughly brooming the surface to remove all dirt, dust and other foreign matter including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 14 | Providing and fixing oxidized M.S.sliding door bolts with nuts and serews complete including all leads, lifts and carriage of materials and as directed by the Engineer Incharge.:-300x16mm |
| 15 | Providing and fixing oxidized M.S.tower bolts (barrel type) with nuts and serews complete including all leads, lifts and carriage of materials and as directed by the Engineer Incharge.:- |
| 16 | 250x10mm |
| 17 | Providing and fixing oxidized M.S. handles with necessary screws complete including all leads, lifts and carriage of materials and as directed by the Engineer In charge.:- |
| 18 | 100mm |
| 19 | Excavation in foundation and trenches in all type of soil such as pickwork jumper work Kankar, moorum, shingles including decomposed soft and hard rock etcupto all heights stacking the excavated earth not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundations etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth in all leads and lifts as per the direction of Engineer in-charge. |
| 20 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish. Including centring,shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4mtrs and removal of the same for insitu reinforced concrete and plain concrete work in:- |
| 21 | Vertical surface such as wall of (any thickness) partition and the like including attached pillaster buttresses plinth and string courses and like and as per the direction of Engineer-in-charge .including entire carriage of material upto all leads and lifts. |
| 22 | Providing and laying cement concrete plum concrete 1:5:10(1cement:5sand:10graded stone aggregate 40mm nominal size) with 15% plum and curing complete excluding cost of form work in retaining walls/breast walls, the size of plums shall usually be 150mm to 300mm as per HPPWD specification. including entire carriage of material upto all leads and lifts. |
| 23 | Providing and laying cement concrete 1:2:4 (1 cement : 2sand : 4graded stone 20mm nominal size)& curing complete excludung cost of form work with cement concrete work in foundation and plinth. |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender