Tender For Repair Of Wall, Drain, Hardstanding, Foothpath, Fencing And Certain Other Misc Works And Comprehensive Maintenance Of B/R Works At Af Stn Site R Under Ge(Af) Thane
Tender Value
22.50 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
45000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Wall, Drain, Hardstanding, Foothpath, Fencing And Certain Other Misc Works And Comprehensive Maintenance Of B/R Works At Af Stn Site R Under Ge(Af) Thane
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Aug-2026 | REVISED BOQ | BOQ | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames not exc 1.5 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Taking down door Chowkat Exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Taking down Shutters of any description n exc 1 sqm each complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Taking down Shutters exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Repairs to shutters of any description n. exc 1 sqm each easing & adjusting without taking down complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Repairs to shutters of any description easing & adjusting without taking down area exc 1 sqm but n. exc 2 sqm complete all as specified and as directed by Engineer-in-Charge. |
| 7 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed Engineer-in-Charge. |
| 8 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.complete all as specified and directed by Engineer-in-Charge. |
| 9 | S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge. |
| 10 | S&F 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated,complete all as specified and directed by Engineer-in-Charge. |
| 11 | S&F for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chawkats, complete all as specified and directed by Engineer-in-Charge. |
| 12 | S&F Bands, straps,supports or stays for rainwater pipes, hold fasts etc complete all as specified and directed by Engineer-in-Charge and conforming to Fe-290 Gde-E-165 etc. |
| 13 | Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 as required complete all as specified and directed by Engineer-in-Charge. |
| 14 | S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F extruded aluminium alloy handles 150mm fabricated type, anodised complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, 300mm long staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium Alloy and fixed complete all as specified and directed by Engineer-in-Charge. |
| 17 | S&F Butt hinges bright polished and fixed, but hinges stainless steel 100mm long complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F in repair door sliding bolt aldrop 300mm long aluminum anodised complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&Fin repair aluminium anodized barrel tower bolt extruded section and fixed 150mm long, complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F in repair extruded aluminium alloy handles 100mm fabricated type, anodised, complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F in repair butt hinges stainless steel 100mm long, complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F Mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate, complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&Fin repair mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F in repair Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staplescomplete all as specified and directed by Engineer-in-Charge. |
| 26 | Hacking out old broken glass (any thickness, size, quality or description) from wooden, metal frame including punching or drilling out old glazing pins/spring clips ,complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F sheet glass ordinary quality 4.00mm thick and glazing with oil putty in squares exc 0.5 sqm in each pane, complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F figured glass, pin-head type 4.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane, complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F in repair floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor with overall length of cover plate 140mm complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. |
| 31 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in dry mortar, complete all as specified and directed by Engineer-in-Charge. |
| 32 | M&L machine cut cudappa stone slab 20-25 mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing including 10mm thick rendering in CM1:3, complete all as specified and directed by Engineer-in-Charge. |
| 33 | M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick set and jointed in neat cement slurry over and included 10mm thick bedding layer/ backing coat in CM 1:3 and pointed in white or colour cement to match, complete all as specified and directed by Engineer-in-Charge. |
| 34 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:4CM screed bed or bedding layer for laying floor finishes,complete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:4 CM screed bed or bedding layer for laying floor finishes , complete all as specified and directed by Engineer-in-Charge. |
| 36 | M&L Vitrified ceramic tiles light shade 10mm thick 9square/ractangular) polished area of each tiles n.exc 0.36 sqm in floors set and jointed in and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:4 CM screed bed or bedding layer for laying floor finishes complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F in repair Drapery curtain rod/ Harrison rails of anodised aluminium alloy complete with MS brackets golden colour rings and sode caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F in repair brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F in repair 15mm two way bib cock for health faucet, complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed by Engineer-in-Charge. |
| 41 | Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed by Engineer-in-Charge. |
| 42 | Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed by Engineer-in-Charge. |
| 43 | M&L for galvanised iron tube 20mm dia medium grade with all fitting and fixtures such as bends, elbows, tees, shots pieces, back nuts, connectors laid in walls,Floors, complete all as specified and directed by Engineer-in-Charge. |
| 44 | M&L for galvanised iron tube 15mm dia medium grade with all fitting and fixtures such as bends, elbows, tees, shorts pieces, back nuts, connectors laid in walls,Floors complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply and fix 16 mm outer dia 3-layers PP-R polypropelene random copolymer concealed pipes SDR7.4(PN 16) UV stabilised and anti microbial fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaed polypropylene random fitting fixed complete to walls ,ceilings or in floor etc. complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F in repair stop valves/ angle valve 15mm dia fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F in repair 15mm dia Bib taps, fancy type chromiun plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F in repair brass CP brass shower rose with swivel joint 125 mm size all as specified in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F Grating doom 100mm dia of PTMT (Min weight 25gms), complete all as specified and directed by Engineer-in-Charge. |
| 50 | S&F Grating doom 125mm dia with waste hole of of PTMT (Min weight 40 gms) complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including, seat and cover, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe, complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, CP waste fitting and PVC waste pipe, complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including, connection to trap, complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F in repair CP health faucet (ABS body)mild steel chromium plated suitable for 15mm dia pipe with 1.25 metro long Flexible Tube & Wall Hook, complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F in repair for PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F in repair for PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F in repair for PVC (SWR) bends 110mm any radius with rubber ring, complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F in repair for PVC (SWR) branch piece 110 mm, double (double Y) equal or unequal, complete all as specified, complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F in repair for PVC (SWR) branch piece 75 mm, double (double Y) equal or unequal, complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply and fix PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement,complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F in repair 15mm dia Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed , complete all as specified and directed by Engineer-in-Charge. |
| 63 | Dismantling water tanks (exc 250 liter but n exc 500 liter capacity) and removing to store complete all as specified and directed by Engineer-in-Charge. |
| 64 | Dismantling water tanks (exc 500 liter but n exc 1000 liter capacity) and removing to store complete all as specified and directed by Engineer-in-Charge. |
| 65 | Hoisting and Fixing Rotational moulded polyethylene water storage tanks of 500 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge. |
| 66 | Hoisting and Fixing Rotational moulded polyethylene water storage tanks of 1000 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge. |
| 67 | S&F in repair Gun-metal, globe or gate valves, 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F in repair Gun-metal, globe or gate valves, 15mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F in repair Brass CP mixer for mixing hot& cold water screwed down for iron pipe and fixed to 15mm dia bore pipe etc complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F powder coating of any colour (Thickness or powder coating not less than 50 micron)aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge. |
| 71 | M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of Oil bound distemper on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 72 | M & L for preparaing plastered or unplastered surfaces of old walls including washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of Oil bound distemper on walls complete all as specified and directed by Engineer-in-Charge. |
| 73 | M & L for preparaing plastered or unplastered surfaces of old walls including brooming down or steel wire brushing, scraping down smoke or soot moulds, efflorences and trading oil and greasy spots and applying one coat of Acrylic emulsion paint white or tinted on walls including cornices complete all as specified and directed by Engineer-in-Charge. |
| 74 | M&L for 3mm thick one coat of wall care putty on wallcomplete all as specified and directed by Engineer-in-Charge. |
| 75 | M&L for 3mm thick one coat of wall care putty on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 76 | Taking down cement plaster on brick or stone walls or concrete surface etc incl racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 77 | M&L for rendering 5mm thick in cm 1:3 on fair faces of concrete as in soffit ceiling of slab, chajjas finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 78 | M&L for rendering 15mm thick in cm 1:6 on fair faces of concrete or brick surface of wall and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 79 | M & L for preparation of newly plastered surfaces and applying two coat of Oil bound distemper over a coat of alkali resist primer on wall ,complete all as specified and directed by Engineer-in-Charge. |
| 80 | M & L for preparation of newly plastered surfaces and applying two coat of Oil bound distemper over a coat of alkali resist primer on ceilings ,complete all as specified and directed by Engineer-in-Charge. |
| 81 | M&L for preparation of Old Steel surfaces of any description over 10cm width of girth applying one coats of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge. |
| 82 | M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc complete all as specified and directed by Engineer-in-Charge. |
| 83 | M&L for preparation of old wood surfaces of any description over 10cm width of girth applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 84 | M&L for cleaning of OH PVC Service Tank internally by bailing out of water/sludge from bottom of sump, removing all scale, dirt, alges and other growths from entire surfaces of tank and from mouths of circulating pipes by rubbing with wire brushes and by high pressure cleaning method with rotary sets with approved detergents and sucking all dirty water by vacuum cleaners, disinfecting the tank with approved chemical/bleaching powder for making the surfaces bacteria free and cleaning with fresh water, complete all as specified and directed by Engineer-in-Charge. |
| 85 | Overhead PVC water tank n. exc 500ltr capacity Note : cleaning of OH PVC service tanks are safely to be handled Damage and breaking of tanks are on Contractors OWN risk |
| 86 | Overhead PVC water tank n. exc 1000ltr capacity Note : cleaning of OH PVC service tanks are safely to be handled Damage and breaking of tanks are on Contractors OWN risk complete all as specified and directed by Engineer-in-Charge. |
| 87 | M&L Cleaning and removing all scale and dirt etc, from tanks capacity exc 1000 ltr & n. exc 2000 ltr and from months of circulating pipes etc, complete all as specified and directed by Engineer-in-Charge. |
| 88 | M&L for Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed Aluminium Die cast body complete all as specified and directed by Engineer-in-Charge. |
| 89 | S&F in Repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc.complete all as specified and directed by Engineer-in-Charge.(each line wire to be measured) |
| 90 | S&F in repair,concertina coil fencing with punched tape concertina coil 1050 mm dia 6-7 metre openable length, having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, complete all as specified and directed by Engineer-in-Charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (Note: cost of M.S. angle, shall be paid separately under relevent item of Sch A) |
| 91 | S&F in repair,concertina coil fencing with punched tape concertina coil 600 mm dia 6-7 metre openable length, having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, complete all as specified and directed by Engineer-in-Charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (Note: cost of M.S. angle, shall be paid separately under relevent item of Sch A) |
| 92 | Restraining and resecuring including making good staples etc.of exiting galvanised barbed wire and fixing to any type of standard rails straining bolt including securing or tying at crossing with and provision of galvanised M.S wire stapes or steel pins, etc or deirect (each line wire to be measured) complete all as specified and directed by Engineer-in-Charge. |
| 93 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc, complete all as specified and directed by Engineer-in-Charge. |
| 94 | M&L for Precast cement concrete Block (1:3:6), type C1 (using 20mm graded stone aggregate) straight or curved on plan exc 6 mtr mean radius, exc 10 cm width and set in CM (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 95 | M&L for walling of random rubble, brought upto courses, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 96 | Ditto- all as per item No 94 above but except stones complete all as specified and directed by Engineer-in-Charge. |
| 97 | Racking out joints/ pointing to random rubble or polygonal rubble uncoused or brought up to courses complete all as specified and directed by Engineer-in-Charge. |
| 98 | M&L for raised pointing to random or poygonal rubble, uncoursed or brought up to courses in CM 1:4 etc. complete all as specified and directed by Engineer-in-Charge. |
| 99 | M&L for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair complete all as specified and directed by Engineer-in-Charge. |
| 100 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer-in-Charge. |
| 101 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry With grey cement and no pigments in floors over 15 mm thick screed bed 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 102 | Dismantling floor tiles, paver block or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and staking and reuse for similar works complete all as specified and directed by Engineer-in-Charge. |
| 103 | M&L for stone dust layed in floors or paving etc spread, levelled and rammed including watering, complete all as specified and directed by Engineer-in-Charge. |
| 104 | Labour only (except tiles) machine pressed precast concrete inter locking paver block with grey cement and pigment (Reflective type) in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade, complete all as specified and directed by Engineer-in-Charge. |
| 105 | M&L Machine pressed precast coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with mixture of grey cement and pigment, complete all as specified and directed by Engineer-in-Charge. |
| 106 | Demolition of un-reinforced cement concrete in any position, complete all as specified and directed by Engineer-in-Charge. |
| 107 | M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in Floor, Hard standing 75 mm thick, surfaces finished even and fair without using extra cement as in, complete all as specified and directed by Engineer-in-Charge. |
| 108 | Welding in repair exc 2.5cm but n exc 5cm in length, thickness of Metal to be welded n.exc. 6mm, complete all as specified and directed by Engineer-in-Charge. |
| 109 | Dismantling posts or struts (wood,steel or RCC.) any section,including taking out embedded portion and making good disturbed natural ground,complete all as specified and directed by Engineer-in-Charge. |
| 110 | Excavating in post holes(or similer holes) each in soft soils n exc 0.5 cum getting out,returning filling in and raming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface, complete all as specified and directed by Engineer-in-Charge. |
| 111 | M&L for cement concrete type C-2 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete, complete all as specified and directed by Engineer-in-Charge. |
| 112 | S&F Hand rails,half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts.posts and struts in fencing including cutting tops to shape as directed ,drilling holes,notching for wires, etc, flat iron fillets(for securing wire mesh etc.) including all necessary drilling,bolting or riveting etc.and similer work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engineer-in-Charge. |
| 113 | Dismantling fencing wire mesh,any type, complete all as specified and directed by Engineer-in-Charge. |
| 114 | S&F GI wire chain link fencing ( Minimum wt 2.5kg/sqm) minimum 2.5mm thick (excluding PVC coat) , UV resistant ,1mm dia PVC coated (Overall thichness of 75X75mm mesh size, complete all as specified and directed by Engineer-in-Charge. |
| 115 | S&F Tie bars with screwed ends, nuts, washers and mild steel paltes for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed by Engineer-in-Charge. |
| 116 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long diameter of the neck in 5 to 10 mm, complete all as specified and directed by Engineer-in-Charge. |
| 117 | S&F Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, complete all as specified and directed by Engineer-in-Charge. |
| 118 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engineer-in-Charge. |
| 119 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engineer-in-Charge. |
| 120 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping, complete all as specified and directed by Engineer-in-Charge. |
| 121 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender