Tender For Welcome Maintenance And Camouflage Painting To Certain Bldgs In Tech Area At Madh Island Under Ge(Af) Thane
Tender Value
10.50 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
21000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance And Camouflage Painting To Certain Bldgs In Tech Area At Madh Island Under Ge(Af) Thane
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old treated plastered or un-plastered surfaces of wall and applying one coat of oil bound distember etc complete all as specified and as directed by Engineer-in- Charge |
| 2 | M&L for preparation of old treated plastered or un-plastered surfaces of wall and applying two coat of oil bound distember etc complete all as specified and as directed by Engineer-in- Charge |
| 3 | M&L for preparation of old treated plastered or un-plastered surfaces of ceiling surfaces and applying one coat of oil bound distember on ceiling etc complete all as specified and as directed by Engineer-in- Charge |
| 4 | M&L for preparation of patches of damage old plastered surfaces of ceiling with 2mm wall care putty etc complete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L for preparation of patches of damage old plastered surfaces of wall with 2mm wall care putty etc complete all as specified and as directed by Engineer-in-Charge. |
| 6 | M & L for preparation of old treated wood surfaces of any description over 10 cm width & girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 7 | M&L for preparation of old steel Surfaces and paint of any description, over 10cm in width or girth,not otherwise described & apply one coat of synthetic enamel paint complete all as specified and as directed Engineer-in-Charge. |
| 8 | Dismantling floor hearth or wall tiling including cement morter bedding (but not backing) and subbish of premisses, complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L Coloured Glazed Ceramic tiles 300 x 200 and 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge. Note : Tiling work is carried out in patches area n.exc 1 sqm |
| 10 | M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.Note : Tiling work is carried out in patches arae n.exc 1 sqm |
| 11 | M/L for filling floor /glazed tile joint with white cement tile grout of dr. fixit or equivalent with pigments matching with tiles including cleaning the tile surface properly, complete all as specified and directed by Engineer-in-Charge. |
| 12 | M &L for 40mm wide marble/ Granite door cills of length not exceeding 1.20 m fixed with adhesive /cement etc incl all necessaary cuttings , roughning the existing floor surface, making good etc complete all as specified and directed by Engineer-in-Charge |
| 13 | Taking up or down steel tubing and connections 20mm bore, including cleaning for re fixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 14 | Taking up or down steel tubing and connections 15mm bore, including cleaning for re fixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F GI tubing medium grade including all fittings fixed in floor/ walls/ ceilling etc 20mm dia bore complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F GI tubing medium grade including all fittings fixed in floor /walls / ceilling etc, 15mm dia bore complete all as specified and directed by Engineer-in-Charge. |
| 17 | S & F in repairs 2 way bib cock double handle for hand faucet of Prayg having Cat No.PIS-12 H with wall flange complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F in repairs wall mixer 2 in 1 system with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges, chromium plated, complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F Mirror with plastic cabinet of size 330mmx430mm single door as per approved Make:- Prayag cat No 551 /Neelkamal / shakti , complete all as specified and directed by Engineer-in-Charge. |
| 20 | S/F in repair Toilet paper holder chromium plated fixed with CP screws of Make Prayag model cat No.BA-48 /Equivaent, complete all as specified and directed by Engineer-in-Charge. |
| 21 | S/F in repairs glass corner shelf 300 mm with Abs brackets )300x 600' with heavy wall brackets and ss railing at corners fixed with CP screws etc complete all as specified and directed by Engineer-in-Charge of make Prayag having cat No.BEA 46. |
| 22 | S&F Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin/ sinks etc and fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 23 | Petty repairs to low level flushing cistern by adjusting the float valves, restore leakage in PVC connection, GI bends or sockets including replacing of rubber washer check nuts plungers for any type of flush |
| 24 | S/F in repairs plastic water closet seat cover of standard size black/white closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F as in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F as in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm ,complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F stainless steel plate rack of size 31''x30''x10'' of SS Grade 304 and 0.63mm thickness fixed with rawl plug and screw, fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 28 | S & F in repairs Grating of 125 mm dia of stainless steel with or without waste hole , complete all as specified and directed by Engineer-in-Charge. |
| 29 | M & L for removing and refixing the bib taps, angle cocks, pillar taps , shower rose etc after cleaning the taps for avoiding low pressure removing dirts , scale etc and refixing the same taps with teflon tape etc complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F in repair 15mm bore Chromium plated stop valves, fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, Screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F as in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&F as in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed by Engineer-in-Charge. |
| 34 | S&F as in repairs health faucet (ABS Body mild steel chromium plated suitable for 15mm dia pipe with 1.25meter long flexible tube and ABS wall hook including making connectíons and fixed in position,complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F as in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F as in repairs 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F as in repairs 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F as in repairs Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F as in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed by Engineer-in-Charge. |
| 40 | M/L for filling and repairing wall crack by approved manufacturers material crack filler with polymer grout of asian, fosrock , choksey/ Dr fixite or equivalent manufacturer and making surface smooth applied to parpet ,wall crack , beam column junction , slab junctions to avoid seepage/leakage from external wall surface etc in similar work including making V shape groove to existing craked surface by chiseling /cutter grinding , cleaning , washing and refilling with crack filler of asian /pidilite /choksey/equivalent as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge, rate shall be inclusive of required T&P , scaffolding with all saftey measures up to 7m height of building. |
| 41 | M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry and dismantling old tiles, complete all as specified and directed by Engineer-in-Charge. |
| 42 | M&L for fixing old roof tiles, Mangalore pattern, interlocking at side joints, laid dry and including dismantling old tiles, complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium windows including new screws, complete all as specified and directed by Engineer-in-Charge. |
| 44 | Hacking out broken glass any thickness size guality or description form wooden, concrete, aluminium steel frames glazed with oil putty fixed with nails,Floors complete all as specified and directed by Engineer-in-Charge. |
| 45 | supply and fix 3 mm thick fiaguared glass ,pin head type and glazing in squares n exc 0.5 sqmt in each pane/as in al doors complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F for ordinary sheet glass 4mm thick and glazing in aluminium frame work, complete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F as in repairs 150mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F as in repairs 150mm size of aluminium extruded alloy handles fabricated type, anodized, complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F as in repairs 100mm size stainless steel Butt hinges 1.75 mm thickness, with matt finish, complete all as specified and directed by Engineer-in-Charge. |
| 50 | Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm but n.exc 2 sqm complete all as specified and directed by Engineer-in-Charge. |
| 51 | Resecuring or easing & adjusting with taking down shutters of any description exc 1 sqm but n.exc 2 sqm, complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F as in repairs 300mm mild steel helical door spring including roller plate, complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F as in repairs 100mm length of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn rubber at bottom, fixed in doors, complete all as specified and directed by Engineer-in-Charge. |
| 54 | S & F in repairs Curtain rods, anodised aluminium alloy with fixing brackets, complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F 30mm width of flaps continuous (piano) hinges mild steel, bright finish orelectrogalvanised and fixed as in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F as in repairs 125mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge. |
| 57 | Taking down aluminium sliding windows of any description and any size and replacing the wornout, broken wiremesh, aluminium sections, glass grill, rubber beading, rollers, locks etc as required and refixing back into the same opening for easy movement of shutters including necessary fittings and fxtures, complete all as specified and directed by Engineer-in-Charge. (Note: Items such as i) Wiremesh, ii) Glass, ii) Grill, iv) Rollers, v) Locks,vi) Aluminium sections etc will be paid seperately under respective items as supply only) |
| 58 | Supply only PVC Star lock for Aluminium windows, complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply only Nylon / PVC Rollers for Aluminium Windows, complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and othersections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc including suitable nylon rollers, star lock with handle with complete Fttings. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and specified and directed by Engineer-in-Charge. |
| 61 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,complete all as specified and directed by Engineer-in-Charge. |
| 62 | M&L for washing , rubbing down and stopping old painting surfaces and apply two or more coats of Acrylic smooth exterior emulsion paint with required shade (Company Depot Tinted) @ 1.67 litre/ 10 sqm each coat over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm over old prepared surfaces in camouflage pattern , complete all as specified and directed by Engineer-in-Charge. |
| 63 | M & L for filling and repairing wall cracks by fibre reinforced crack filler of approved manufacturers with polymer grout of asian ,fosroc, choksey/ dr.fixit or equivalent manufacturer and making surface smooth applied to parapet, wall crack , beam column junction , slab junctions to avoid seepage/ leakage from external wall surface etc in similar work including making v shape groove to existing cracked surface by chiseling/ cutter/grinding/cleaning, washing and refilling with crack filler of aisan /pidillite/ choksey/equivalent as per manufacturers instructions etc completed and rate shall be inclusive of required T&P , scaffolding with all safety measures upto 7m height of building. complete all as specified and directed by Engineer-in-Charge. |
| 64 | Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site complete all as specified and directed by Engineer-in-Charge.Note: Taking down Plaster work is carried out in different portion of building walls and quantity is scattered. |
| 65 | M &L for rendering 15 mm thick in cemnent mortar 1:4 (10 mm thick backing Coat and 5mm thick finishing coat) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound (water proofing compound shall be measured and paid seperately) complete all as specified and directed by Engineer-in-Charge.Note: Plaster work is carried out in different portion of building walls and quantity is scattered. |
| 66 | Supply only liquid water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 67 | M&L for preparation of new plastered wall surfaces and apply two or more coats of Acrylic smooth exterior emulsion paint with required shade (Company Depot Tinted) @ 1.67 litre/ 10 sqm each coat over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm over old prepared surfaces in camouflage pattern complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender