Tender For Improvement To Site Office At Cwe (Af) Gurgaon Under Ge (Af) Faridabad
Tender Value
12.61 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
9 days left
EMD
25238
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement To Site Office At Cwe (Af) Gurgaon Under Ge (Af) Faridabad
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in Hard/dense soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm.complete all as specified and directed. |
| 3 | Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 4 | Excavating in post holes (or similar holes) in any type of soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm ,watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed. |
| 5 | M&L PCC in foundations, filling and mass-concrete in 1:4:8 type D-2 (using 40 mm graded stone aggregate) complete all as specified and directed. |
| 6 | M & L for Plain cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in surface channels etc complete all as specified and as directed. |
| 7 | M&L for Extra for forming fair finished drain or channel inner girth 30cms in cement concrete (1 :2: 4) Type B0 (using 12.5 mm graded aggregat) eusing extra cement incl forms moulds mitred/stopped ends etc complete all as specified and dircted |
| 8 | M/L cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. |
| 9 | M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection complete all as specified and directed. |
| 10 | M&L RCC (1 :2: 4) Type B1 (nominal Mix) Using 20mm graded stone aggregate) as in Beams, cantilevers, bressumm ers, lintels over 1.5m span complete all as specified and directed. |
| 11 | M&L RCC (1 :2:4) Type B1 (nominal Mix) using 20 mm graded aggregate in slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 12 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, to flat rough finished surface etc, also splays between floors and beams, etc complete all as specified and directed. |
| 13 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, footing ,hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed. |
| 14 | Complete all as per Item 13.0 herein above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 15 | M&L Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 16 | M&L for brick work with sub class old size 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed. |
| 17 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water & removal of debris off the premises etc. complete all as specified & directed. |
| 18 | M&L Rendering 15mm thick on brickwork or concrete surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement) complete all as specified and directed. |
| 19 | M&L for preparation of newly plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 20 | M&L for rendering 10 mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified & directed. |
| 21 | M&L for preparation of new plastered surfaces of wall and preparing surfaces as directed and applying two coats of distemper oil emulsion over a coat of primer over and including 1mm thick wall care putty complete all as specified & directed. |
| 22 | M&L for complete removal of existing treatment on wall etc and applying two coats of distemper oil emulsion including 1 mm thick wall care putty complete all as specified & directed. |
| 23 | S&F Rolled mild steel Joist, channel, square/rectangular hollow section, tubular sections, angle, or tee sections, fixed independently, without connecting plates, etc. Fe 410-0 W (Gde E-250) quality A complete all as specified and directed. |
| 24 | M&L for two coats of synthetic enamel paint on new steel surfaces of any description exc. 10 cm width or girth including preparation of surfaces including one coat of red oxide primer complete all as specified and directed |
| 25 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.60 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws complete all as specified and directed. |
| 26 | M&L for 100mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate in floor in sub base complete all as specified and directed. |
| 27 | M&L for providing cement concrete Type B1 (1:2:4) (20 mm graded stone aggregate) as in coping, lintels, mud stops rounded or chemfered all as specified. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all complete. |
| 29 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified & directed. |
| 30 | M&L for glazed coloured ceramic tiles of size 300X450X7 mm thick on vertical surfaces such as skirting dados, risers etc set and jointed in neat cement slurry and pointed in white/coloured cement to match with colour of tiles over 10mm rendering in CM (1:4) complete all as specified and directed. |
| 31 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc .18 sqm but not exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 15mm screed bed in CM (1:6) complete all as specified and directed. |
| 32 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including frames and cover fillets complete all as specified and directed. |
| 33 | S&F Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hanger 4mm dia (upto 1200mm lenth)made out of GI flat 40x3mm size of 60cm long with expansion hold fastener 12.5mm dia 40mm long complete all as specified and directed. |
| 34 | M&L for non asbestos fibre cement building boards of size 595mmx595mm x4mm thick, preprimed, self embossed fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed. |
| 35 | Supply and fixing powder coated aluminium frame (powder coated) for doors, windows, ventilators or Aluminium Partition with one or more rebates including joining cletas for fixing complete all as specified and as directed by Engineer-in-Charge.Note: Colour coating shall be approved by GE. |
| 36 | S & F aluminum powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Soction of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and directed. |
| 37 | S&F 4.80mm thick frosted sheet glass ordinary quality in square n. exc 0.50 sqm in each pane complete all as directed. |
| 38 | Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each and making good to disturbed surfaces complete all as specified and directed. |
| 39 | Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4.0sqm each and making good to disturbed surfaces complete all as specified and directed. |
| 40 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 41 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ S & F Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note : M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 42 | M&L for Pressed steel frames (125 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and directed. |
| 43 | S&F 30 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & both face is covered with decorative face veneer with lipping / frame to match & fixed to chowkats complete all as specified & directed. |
| 44 | S&F 35 mm thick, hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified & directed. |
| 45 | M&L for preparing new wood & wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed. |
| 46 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified & directed. |
| 47 | S & F Mild Steel butt hinges, medium weight cold rolled 100mm size complete all as specified and directed. |
| 48 | S & F Aluminium anodised, barrel tower bolts of extruded section and fixed 100mm long complete all as specified and directed. |
| 49 | S&F 250mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed |
| 50 | S & F Aluminium handles, cast type, anodised 100mm size all as specified and directed by Engr - in - Charge . |
| 51 | S&F 1000 Ltrs capacity rotational moulded polythene water storage tanks(Cylindrical vertical with closed type) hoisted and fixed in position complete all as specified and directed. |
| 52 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 53 | S&F Wash basins white, vitreous China, Ovel type, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified & directed. |
| 54 | S&F Single piece vitreous China suite european water closet and cistern, white colour, with UF seat cover with fittings complete all as specified and as directed. Make : Parryware Cat Part No C8906 (S-300) or equivalent model of Hindware / Cera / Jaquar / RAK and approved makes list mentiond in Tender Documents. |
| 55 | S&F fancy type15mm dia Bib taps cast copper alloy, long body, chromium plated screwed down to iron pipe or for brass ferrule & fixed complete all as specified & directed. |
| 56 | S&F brass chromium plated mixer for wash hand basin hot and cold water fancy type fixed with iron pipe 15 mm dia complete all as specified and directed. |
| 57 | S&F brass chromium plated wall mixer for hot and cold water fancy type fixed with iron pipe 15 mm dia complete all as specified and directed. |
| 58 | S&F 15 mm bore stop valves/angle valves cast copper alloy fancy type , chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes complete all as directed by EIC. |
| 59 | S&F hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) with clamp complete all as specified and as directed. |
| 60 | S&F 20 mm bore steel water tubing medium grade laid in trenches complete all as specified and directed. |
| 61 | S&F GI tubing 15 mm bore medium grade with necessary GI fittings and fixed complete to wall/ceiling with clips, wall hooks, and wooden plugs etc. or laid in floors complete all as specified and directed. |
| 62 | S&F of PVC (SWR) pipes of 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 63 | S&F of PVC (SWR) pipes of 75mm bore single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 64 | S&F 75 mm PVC(SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 65 | S&F 600mm x 450 mm size beveled edge looking mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified and directed. |
| 66 | S&F of vitreous Soap dish white approximate size 160x160x90mm with CP screws plug complete all as specified and directed. |
| 67 | S&F of single tubular Towel rail brass chromium plated of size 60 cm long D type, 20mm dia fixed complete all as specified and directed. |
| 68 | S&F brass CP health faucit with flexible tube complete all as specified and directed. |
| 69 | S& F grating doom 100 or 125mm dia of PTMT (Minimum Wt 25 gms) complete all as specified and directed. |
| 70 | S&F 10 ltrs PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and directed. |
| 71 | S&F Brass CP shower Rose with or without swivel joints of size 125mm including fixing to steel pipe or union complete all as specified and as directed |
| 72 | S&F PVC connection 15mm size with PTMT Nuts of length 600mm complete all as specified and directed. |
| 73 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100mm internal dia of pipe complete all as specified and directed. |
| 74 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 75 | S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210gms) complete all as specified and directed. |
| 76 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 77 | M&L PCC 1:3:6, type C-1 (20mm graded crushed stone aggregate) as in foundations, filling, sub base and mass concrete, etc complete all as specified and directed. |
| 78 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry or laid dry and pointed complete all as specified and directed. |
| 79 | Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size /shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 50mm thick compected bed of course sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layers through vibratory compaction by using palte vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand complete all as specified and directed. |
| 80 | M&L for Providing, cement concrete type B-1, 1:2:4 (using 20mm graded stone aggegate) in kerbs,stops, rounded or chamfered on edges of carriageway including necessary formwork complete all as specified and directed. |
| 81 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc complete all as specified and directed. |
| 82 | M&L for concealed point wiring with single core, PVC insulated and unsheathed 1100 volts grade cable with multi strand copper conductor of size 1.5 Sq mm FRLS (Nominal area) drawn through and including non metallic rigid PVC conduit, medium grade, ISI marked not less than 20mm dia, with all fittings including Tee, Junction boxes and provision of Modular Metal flush box and plate with frame of suitable module for mounting switch sockets and regulators and drawing continuous earth wire of PVC insulated unsheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed. |
| 83 | For one light point controlled by one way switch |
| 84 | For one fan/exhaust fan and wall mounted fan point controlled by one way switch |
| 85 | For one bell point controlled by one bell push |
| 86 | Complete all as per item No 82 herein above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size complete all as specified and directed. |
| 87 | Complete all as per item No 82 herein above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size complete all as specified and directed. |
| 88 | Complete all as per item No 82 herein above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including Single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire 2.5 sqmm FRLS complete all as specified and directed. |
| 89 | S&F Modular switch 1 way 6A, 1 modules suitable for 240 volt AC complete all as specified and directed. |
| 90 | S&F Modular Socket, 6A -3 pin combined 2 module, suitable for 240 volt AC complete all as specified and directed. |
| 91 | S&F Modular switch 1 way 16A ,1 module suitable for 240 Volt AC complete all as specified and directed. |
| 92 | S&F Modular Socket, 16A -3 pin combined 2 module, suitable for 240 volt AC complete all as specified and directed. |
| 93 | S&F Modular Tv socket, 2 modules suitable for 240 volt AC complete all as specified and directed. |
| 94 | S&F Electronic modular Fan Regulator rotary flush step type 120 watt, 240 volt 50 Hz AC complete compatible with BLDC fans complete all as specified and directed. |
| 95 | S&F Bell Modular push flush type 5 Amps suitable for 240 volt complete all as specified and directed. |
| 96 | S&F electronic ding dong, 230 Volt AC, single pole, complete all as specified and directed. |
| 97 | S&F of ceiling roses, surface bakelite 65x50mm 3 terminals , PVC/Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed. |
| 98 | Taking down old unsv MCB DB of any size complete all as specified and directed. |
| 99 | S&F MCB DB SPN 8 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCB/isolators/RCCs etc completed after dismantling old one complete all as specified and directed. |
| 100 | S&F in replacement MCB SP 6 to 32 Amps 10 KA, 240 volt 'C' Series complete all as specified and directed. |
| 101 | S&F MCB SPN 40 Amps 10 KA, complete all as specified and directed. |
| 102 | S&F modular MCB double pole 20 Amp complete with modular cover for AC point complete all as specified and directed. |
| 103 | S&F for Recess mounted 36/40 Watt high efficancy 2*2 recess LED flat panel with high brightness high efficiency PMMA Diffuser glare free LED homogenous illumination ceiling light complete with electronic driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 104 | S&F Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base for Living Room & Bedroom flexible copper wire, twin core cable incl 9 watt LED lamp B22 cap complete all as specified and directed. Note Havells Cat No-LHFOECE1TZ1O014 or equivalent approved makes as mentioned in Tender documents |
| 105 | S&F for Recess mounted 18/20 Watt high efficancy 1x1 feet recess LED flat panel with high brightness high efficiency PMMA Diffuser glare free LED homogenous illumination ceiling light complete with electronic driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 106 | Supply, installation, testing and commissioning of 1200mm sweep BEE 5 star rated, ceilling fan with Brush Lees Direct Current (BLDC) Motor, Class of insulation: B, power factor not less than 0.9 service value (CMM/W) minimum 6.85, having 4 aerodynamically designed blades from high quality metallic material painted smooth for maximum Air delivery not lesss than 230 CMM, 350 RPM (tolerence as per IS:374-2019), THD less than 10%, including remote or electonic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise=75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50Hz single phase AC supply complete all as specified and directed. |
| 107 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and directed. |
| 108 | Taking down unserviceable submain wiring of alluminium of any size cable including batten/conduit complete etc and making good disturbed surfaces complete all as specified and directed. |
| 109 | M & L for submain wiring with two run of 4.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 4.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked (not less than 20 mm dia) complete with all acessories and fittings all laid/ fixed concealed in wall and surface conduit on ceiling portion only complete all as specified and directed. Note:- 3 Runs of 4.0 Sqmm and one run of PVC conduit will be used as one unit for measurement purpose. Please Enable Macros to View BoQ information |
| 110 | M & L for submain wiring with two run of 4.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 4.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked (not less than 20 mm dia) complete with all acessories and fittings all laid/ fixed concealed in wall and surface conduit on ceiling portion only complete all as specified and directed. Note:- 3 Runs of 4.0 Sqmm and one run of PVC conduit will be used as one unit for measurement purpose. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender