Tender For Comprehensive Maintenance And Internal Periodical Services In Polo Road Messes (Garuda, Asc Iml, Aad), Sw Comd Hut, S Comd Hut In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
Tender Value
48 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
9 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance And Internal Periodical Services In Polo Road Messes (Garuda, Asc Iml, Aad), Sw Comd Hut, S Comd Hut In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Preparation of surface with Washing, rubbing down and stopping of distempered and painted surface wall / ceilling with sand paper /Putty in accordance to standard Engineering practices to make the surface free from dust, loose paint etc complete all as specified and as directed by Engr-in-Charge. |
| 2 | M&L for applying of 1mm thick wall care putty over prepared surfaces of walls / ceiling including sanding of putty surface properly with ragemarg to make the surface free from dust or loose particles complete all as specified and as directed by Engr-In-Charge. |
| 3 | Providing and applying two coats of smooth acrylic emulsion on wall/ ceilling with rich matt finish having VOC less than 50 grams per ltr complying leed criteria @ 1 ltrs (undiluted)/10 sq mtrs diluted with water in 2:1 ratio applied over and including priming coat with Roller finish and allow 6- 8 hrs to dry the surface for second coats of paint complete all as specified and as directed. |
| 4 | Preparation of old painted surfaces of wood work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 5 | Description all as per item No. 4 above but on steel surfaces complete all as specified and directed. |
| 6 | Description all as per item No. 4 above but two coats complete. (wooden surface) |
| 7 | Description all as per item No. 5 above but two coats complete. (steel surface) |
| 8 | M&L for preparation of plastered or unplastered surfaces of wall and applying one coat of oil bound distember complete all as specified and directed. |
| 9 | Description all as per item No 8 above but two coats complete. |
| 10 | M&L for preparation of plastered or unplastered surfaces of Ceiling and applying one coat of oil bound distember complete all as specified and directed. |
| 11 | M&L for preperation of surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New/Old and walls/ceiling surfaces with filling wall care putty in potholes as required complete all as specified and all as directed. |
| 12 | S&F SS Grating doom 100 mm dia with or without waste hole complete all as specified. |
| 13 | S&F SS Grating doom 75 mm dia with or without waste hole complete all as specified. |
| 14 | S&F in repair of 110 mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls ,floors, trenches etccomplete all specified and directed. |
| 15 | S&F in repair 110 mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. |
| 16 | Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including ranking out joints, hacking for key, scrubing down with water etc complete all as specified. |
| 17 | M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, finished fair and even complete all as specified and directed. |
| 18 | M&L for preparation of new plastered surfaces of walls and applying 1 mm thick wall care putty complete all as specified and directed. |
| 19 | Rendering 5 mm thick in cement mortar 1:3 in ceiling / facia / chajja etc. finished even and smooth complete all as specified and as directed. |
| 20 | M&L Preparation of new plastered surfaces of ceiling and applying two coats of Oil bound distember on ceiling including all care putty on newly plastered walls of 1mm thick incl removal of existing treatment on surfaces of walls by scrapping down complete all as specified and directed. |
| 21 | M&L preparation of New/old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 22 | Hacking out old brocken glass (any thickness, size, quality or description) from wooden/ metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 23 | S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 24 | S&F or in repair stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. Note- Welder with welding machine reqd to fix wiremesh in old steel windows upto 8th floor Height. |
| 25 | S&F 3mm thick Figured glass, pin head type and glazing with oil putty in square not exc 0.80 Sqm in each panes fixed any bldg hight complete all as specified and directed in upto 8th floor Height. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed. |
| 27 | M&L for Vitrified Ceramic light shed Coloured tiles 9 to 10 mm thick (square/rectangular) polished, area of each tiles n exceeding 0.36 sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bed in CM 1:6, complete all as specified. |
| 28 | Description all as per item No. 27 above but on vertical surfaces such as skirting / dados with over and including 10 mm thick CM 1:4 as in backing coat complete all as specified. |
| 29 | M&L for coloured non skid ceremic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jounted in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 30 | M&L for glazed coloured ceremic tiles sizes 600x300x7mm or 450x300x 7mm thk tiles on vertical surfaces, such as skirting/dado ,incl 10 mm rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed. |
| 31 | S&F MS angle iron as in door framed work with Hold fast conforming to Fe 290(Gde E-165) including tie rod, hinges including one shop of red oxide primer etc. complete. |
| 32 | Taking down chowkats or frames with shutters (without taking off shutter from the frame) not exc. 1.5 sqm each and removing off the premises complete all as specified and directed. |
| 33 | Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and not exc. 4.00 sqm each complete all as specified and directed. |
| 34 | S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 35 | S & F of factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam coloured PVC Sheet on both face, supplying & fixing in frame at site as per secification & directed |
| 36 | S&F 35mm thick 2nd class hard wood glazed and skeleton shutter's open rebated prepare to receive glass gouge etc edges of framing plain chamfered or ronded fitted with cut and mitered bead's for securing glass gauge etc size of marker of shutters as per SSR Part-I sec-8 clause 8.2(a). |
| 37 | S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panel commercial type on both sides. |
| 38 | M&L for PCC of Type B-1, 1:2:4 (using 20 mm graded stone aggregate) for Hold fast, as coping similar wks as required complete all as specified and directed. |
| 39 | Box type Steel windows with double shutters (inside for wiremesh & out side for glass), hinges, steel handle, tower bolt and steel peg stay complete with glazing bars dovetailed or welded .WIRE MESH –Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperature 1.40mm. Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate . Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw . Note: The glazed/Guaged shutter includingguard bars shall be measure once i.e. as per area of opening. No separate payment of separate shutter i.e. glazed and fly proof and guard bars shall be made. Area of shutter shall be the area of opening. The rate quoted by the contractor is deemed to inclusive two coat of paint over a coat of primer of all aspects incl all fitting,glass,wire mesh,guard bar , as specified in Drg No CEDZ/TD/289 sheet 1 R/2 and 2R/2. |
| 40 | S&F mild steel butt hinges medium weight cold rolled of size 100 mm shutters. complete all as specified and as directed. |
| 41 | S&F repair Extruded Aluminium alloy handle fabricated type, anodised of size 150mm. complete all as specified and as directed. |
| 42 | S&F repair Aluminium anodised barrel tower bolt of extruded section of size 150mm. complete all as specified and as directed. |
| 43 | S&F repair Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sloding bolt of extruded section or cast alluminium alloy of size 250mm. complete all as specified and as directed. |
| 44 | M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and as directed. |
| 45 | M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamalle paint over a coat of red oxide zink chrome primer. complete all as specified and as directed. |
| 46 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing. complete all as specified and as directed by Engineer-in-Charge |
| 47 | Description all as per item No. 46 above but for 20mm Dia. |
| 48 | S&F steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, bore of pipe 15 mm dia.including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4 complete all as specified and as directed by Engineer-in-Charge |
| 49 | Description all as per item No. 48 above but for 20mm Dia. |
| 50 | S&F in repairs vitreous china Wash hand basin, white, flat back size 550 x 400mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32mm size bore of pipe complete all as specified and directed. |
| 51 | S&F in repair looking mirror size 600x450mm mounted on 6mm thick PVC sheet and aluminium frame all around incl fix with necessary fixing arrangement complete. |
| 52 | S&F in repair CP towel rail 600mm long complete all as specified and as directed by Engineer-in-Charge complete all as specified and directed. |
| 53 | S&F in repair 450 mm long PVC connection with stainless steel armed 15 mm bore with nuts complete all as specified and as directed by Engineer-in-Charge complete all as specified and directed. |
| 54 | S&F in repair for 15 mm dia fancy type CP bib taps half turn with wall flange with screwed down, screwed for iron pipe or for brass ferrule including cap and fixed complete all as specified and as directed by Engineer-in-Charge |
| 55 | S&F in repair for 15 mm dia fancy type CP Stop valves, Cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge . |
| 56 | S&F in repair 15 mm bore fancy type angle valves half turn chromium plated fancy type with wall flange screwed down high pressure screwed both ends for iron pipes or for unions complete all as specified and as directed by Engineer-in-Charge (Make-Hindware/Jaquar /MARC |
| 57 | S&F in repair for 15 mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 58 | S&F in repair SS soap dish complete all as specified & directed Make Hindware/ Cera |
| 59 | M&L for Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 in brick or stone wall , cutting not exc 10cm girth complete. |
| 60 | S&F in repairs Vitreous China squatting pan 'Orissa' pattern,size 580x440 mm white with integral foot rests (excluding flushng cistern and flush pipe) but incl P trap, lean concrete and connection, complete all as directed by Engneer-in-Charge. |
| 61 | S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with linlet,ball valve, float and handle including brackets, With flush pipe complete all as specified and directed. |
| 62 | S&F in repair 15mm bore brass CP basin mixer for mixing hot and cold water fixed as per manufacture's mannual, with long shunk and cup washers, screwed both ends for iron pipes or for unions complete all as specified and directed Make :- Cera /Somany / Hindware |
| 63 | S&F in repair wall mixer 3 in 1 chromium plated,( L- bend with long bend) with over head shower provision screwed for iron pipes 15mm bore complete all as specified and directed. (Make Jaquare) |
| 64 | Demolition of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed. |
| 65 | M&L for 16-18 mm thick granite (of any type) work ( table rubbed and polished ) in steps, jambs,pillars, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 66 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specifed and dircted . |
| 67 | S&F in repairs 15mm bore brass chromium sink mixer of mixing 'Hot' and 'Cold' water, with swinging point screwed down for iron pipe complete all as specified Make :- Somany /Hindware/Cera |
| 68 | S&F in repairs of Modular wardrobe,cupboards, cabinets, drawers , shelfs, vanity , dressing table including shutters ( depth of 45 Cm up to 70 Cm) etc , all front side, bottom, top, two sides and partions etc made out of 15-18 mm thick HDHMR board and back side made out of 8 - 10 mm thick HDHMR board (Action tesa or equivalent ) with machine pressed 0.5 to 0.8 mm thick fabric/glossy colour laminate on all exposed front side and other sides decorative laminations . All exposed edges of boards with machine pressed edge band 0.8mm from rehau Germanetc (colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters , C/J gola profile for handel less or SS handel, telescopic channels 18'' / 20'' long , rollers for smooths sliding of drawers, etc as required & also repair surrounding area with plaster, paint & tile any damage that occurred during the work complete all as specified and directed by Engr-in-charge. Note: Only front face shall be measured and paid irrespective of area of HDHMR boards provided and fitting as required shall be deemed to be included in unit rate quoted. |
| 69 | S&F in repairs aluminium anodised Hasp & Staple of size125mm safety type including bolt to hinge plate and fixed with screws |
| 70 | S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30 mm width complele all as specified and as directed. |
| 71 | Supply and fix in repairs 40mm dia cupboard knobs fixed with nuts, screw and washers of mild steel bright finished, powder coated, fancy type complete all as specified and directed. |
| 72 | S&F in repair Ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed |
| 73 | S&F 32/40 mm spring type PVC waste pipe fixed toWHB & Sink etc complete all as specified and directed ( Note minimum length of each pipe should not be less than 0.70RM) |
| 74 | S&F in repairs vitreous china floor mounted WC ( Cascade) one piece type (white) including connecetion in drain etc incl water closet seat cover CP health faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed and fixed in repairs. |
| 75 | S&F in repairs health faucet chromium plated with 1.50m CP long flexible pipe and chromium plate nuts completed all as spd Make - Cera/ hindware or equivalent approved. |
| 76 | S&F in repairs cast copper alloy CP toilet paper holder fixed with plug and brass screw completed all as specified. |
| 77 | S&F Vitreous china wash down water closet pan wall hung WC FLS - IVY- 5951 with PP seat cover, hinges, accessories set, size 360 545x365 set jaquar or other equivelent , including flushing cistern and fixed with brass screw complete all as specified and as directed. |
| 78 | S&F in repair brass spindle half turn suitable for 15 mm bib cock / stop cock/ concealed stop cock/ angle cock/ Mixer complete all as specified and directed. |
| 79 | S&F in repair brass spindle half turn suitable for jaquar / hindware fancy type fitting Basin Mixer / Sink Mixer etc complete all as specified and directed. |
| 80 | S&F in repair internal fittings of flushing cistern suitable for cascade type or wall Hung type water closet system complete all as specified and directed. |
| 81 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern) excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottom and cover and mild steel chromium plated or aluminised hinging device. |
| 82 | Dismantling wall and ceiling boards ( fibre pulp, insulation etc ) or insulation boards/ slabs/ blank ets, any thickness, incl cover fillets all as directed. |
| 83 | M&L for aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G .I ( u p to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long complete all as specified and directed. |
| 84 | M&L for Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping complete all as specified and directed. |
| 85 | S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/ Intermediate channel 0.9 mm thick having to equal flanes of 15 mm each and web of 45 mm suspended from soffit at approx x 900mm center to center with GI cleat and steel expension fastners with and including ceiling section ( not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50 mm fixed to the intermediate channel at 457 mm center to center. Including Hangers 6mm dia GI up to 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long and expansion hold fastners 12.50 dia. 40 mm long complete all as specified and as directed. |
| 86 | S &F Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh( fillet, Metal frame work and GI Wire mesh paid seprately) including sunk or raised mouloding complete all as specified and as directed. |
| 87 | Aluminium alloy powder coated (50 micron) anodized door having frame of section 100mm x 44 mm x 2 mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100 mm x 44 mm x 2 mm thick, lock rail and bottom rail of size 115 mm x 44 mm x 2mm thick incl aluminium anodized snap beading and rubber packing & 5.5 mm thick colour designer glass incl 200 mm long tower bolt-2 Nos, 200 mm long Alm handle -02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock (Make :- Godrej), & double action floor door spring(Sandhu/Samrat) heavy duty suitable for 1 m wide shutter for each leaf, complete all as specified and as directed. |
| 88 | S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type incl 5.5mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including frame necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading, sliding channel,roller screws including fittings complete all as per direction of Engr-in-charge. |
| 89 | S&F powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including frame and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2no.), aluminium tower bolt 100 mm long (2no.), suitable handle (1 No.) complete all as specified. |
| 90 | S&F in repair vanity box of HDHMR of size 580x450x680 mm with table top basin and including all connected accessories like waste pipe, coulping complete all as specifies and directed. Make- (Kohler/ Roca/ Bathsense) |
| 91 | M&L for complete removal of existing wall surface and apply wall paper on wall surface stick with glue and adhesive over 1mm thick putty and oil primer complete all as specified. |
| 92 | M&L for Internal texture paint of approved pattern and colour of asian paint or equivalent incl complete removal of existing treament and aplying putty for preparation of base for texture, appling one coat of primer and appling finish coat for texture of approved pattern and colour by Engr-in-charge complete |
| 93 | Chipping off existing loose, damaged Concrete from RCC members of all affected RCC Columns, Beams, Slabs and Chajjas on External and internal facades, etc beyond main r/f. (if required in the opinion of the Consultant), carefully with chisel and hammer Providing and applying ‘Rusticide SS’ Rust passivator or equivalent as specified in the Brand Names to existing r/f. bars Including wire brushing of reinforcement , cleaning washing of concrete etc complete as directed.Providing and applying two coats of rust preventor slurry made out of “Polyalk Fixoprime” or equivalent as specified in the Brand Names and cement in proportion 1:1.5 to existing r/f.bars as directed complete. Providing and applying bonding coat of slurry made out of “Polyalk EP” or equivalent as specified in the Brand Names and cement in proportion 1:1 to concrete and r/f substrates complete as directed Providing and applying “Polyalk EP” or equivalent as specified in the Brand Names. Polymer modified cement mortar in Required proportions(1:5:15) to RCC members Including Hand packing, curing and making the surface rough for plastering. |
| 94 | S&F in repair curtain rod/ rail with stainless steel rod fancy type 25 mm dia including bracket and fancy type lattoo, etc complete all as specified and directed. |
| 95 | S&F in repairs 100 mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 96 | S&F in repairs over head shower rose CP Brass with shower arm for 15mm bore pipe of size 150x150mm complete all as specified and directed. Make :- Kohler/ Bathsense/ Jaguar or Equivelent |
| 97 | Disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading and disposal at an approved Municipal dumping ground outside Defence land (MoD land), for all leads and all lifts, complete all as specified and as directed by the Engineer-in-Charge.Notes:1. Photographic Evidence: The contractor shall submit clear photographic evidence in support of disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials, indicating the condition of the site before loading, during transportation and after unloading at the approved Municipal dumping ground. The photographs shall preferably be geo-tagged and date-stamped and shall form part of the record for verification and payment purposes. 2. Certification by Engineer-in-Charge: Completion of whole work in this BOQ shall be deemed to have been achieved only after certification by the Engineer-in-Charge that no building rubbish/malba, similar unserviceable, dismantled or waste materials have been left at the site and that the site has been thoroughly cleared and cleaned to his satisfaction. 3. Each load shall comprise a minimum carrying capacity of 5.00 cubic metres (Cum). Payment under this item shall be made on a per-load basis for loads conforming to the above minimum capacity and duly verified by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender