Tender For special Repair To Bdy Wall Of Offrs Mess (226*2.13 Mtrs) , 5 Garh Rif Under Ge Dehradun And Provn Of Lightning Arrester In Csd Depot Dehradun
Tender Value
46.50 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
20 days left
EMD
93000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bdy Wall Of Offrs Mess (226*2.13 Mtrs) , 5 Garh Rif Under Ge Dehradun And Provn Of Lightning Arrester In Csd Depot Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of Concrete in ground floors or above and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | Material and labour for brick work with sub class ‘B’ bricks(old size), straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. |
| 4 | Material and labour for brick work (except bricks) straight or curved on plan exc 6 metre mean radius built in CM 1:6 (old size brick) including demolition of brick work built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. |
| 5 | Supply and fixing of TMT bars 10mm dia and over cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed. |
| 6 | Supply and fixing of TMT MS bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 7 | Material and labour for RCC Type B-1, M-25 Design mix (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 8 | Material and labour for formwork flat fair finished surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. |
| 9 | Demolition of reinforced brickwork in suspended slab beam , lintel etc in cement mortar or cement concrete (reinforcement cut are required to faciliate demolition) complete all as specified and directed. |
| 10 | Material and labour for RCC M-25 Design mix { using 20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc and mass concrete complete all as specified and directed. |
| 11 | Material and labour for Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 12 | Material and labour for Use & waste of formwork to sides of pillers, posts, struts, piers, columns and stanchions etc for fair finished surfaces of concrete complete all as specified and directed. |
| 13 | Material and labour for RCC M-25 Design mix { using 20 mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 14 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed. |
| 15 | Material and labour for for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4) finished surfaces even and smooth complete all as specified and directed. |
| 16 | Material and labour for 3mm thick wall care putty (in two layer 1.50mm each)on wall surfaces even and smooth complete all as specified and directed. |
| 17 | Material and labour for two coats of plastic emulsion paint over a coat of primer including preparation on new plastered surfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 18 | Dismantling of Trellies work (Jafri), including taking as underof batterns in trellis (posts and rails measured separately) complete as directed. |
| 19 | Material and labour for providing and fixing factory made 30 mm thick 100% solid WPC (wood Polymer composit) Jali, of required size comprising of virgin polymer of K value 58-60 (Suspension Grade) ,calcium carbonate and natural fibrs ( wood powder /rice husk/wheat husk) and non toxic additives made from extrution process WPC foam sheet Single extruded (inner) with having minimum density not less than 650 Kg/cum manufactured by certified company having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge),minimum compressive strength 50N /mm2 and resistance to spread of flame of classA category with properties of being termite/borer proof,water/moisture proof and fire retardant. WPC jali to fixed with Stainless steel butt hinges (if Required)of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction by the Engineer -in-Charge. Material test cerfificate and authentication should be compulsory provided by the manufacture company complete all as specified and directed. |
| 20 | Material and labour for earthing complete with copper plate 60×60cm ×3.15mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with 20×3mm copper strip earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15 type B1 in pit with angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, test point etc. in and including light grade GI protection pipe 40mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate No. 3 of SSR Part-I complete with necessary earth work in any type of soil, removal to a distance not exc. 50m, testing on completion complete all as specified & directed .(NOTE:-(i) Plate electrode must be surrounded by alternate layer of common salt and charcoal of 15 cm thickness)(ii) Earth lead copper strip and its protection pipe upto and including 7.5 mtr from the top of earth electrode are included under this item. (iii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.(iv) If the desired earth resistance is not found within permissible limit, earthing shall be redone by contractor without any extra cost. |
| 21 | Supply and laying of 20mmx3mm copper strip in 40 mm dia G.I, Pipe medium grade from earth electrode,including connection/terminating with nut spring,washer etc as required (Jointing shall be done by overlapping and with 2 sets of brass nut bolts & spring washer spaced at 50 mm) complete all as specified and as directed. |
| 22 | Supply and fixing of GI pipe made out of 40 mm GI pipe medium grade on wall including using insulation material along the wall and fixing of Early Streamer Emmision (ESE) type lightning arrester on wall etc as required complete all as specified and as directed. |
| 23 | Supply, installation, testing and commissioning of active lightning protection system based on early streamer emission (ESE) type lightning arrester with protection radius of approximately 107 meters at Level IV suitable for buildings/structure protection as per NFC and alonwith GI Mast 13 meter 50 mm dia,6 digit dgital lightning strike counter and testing terminal block and all supporting accessories Rope wire,insullator,hook fastener,pin fastener,titner,Nut bolt,RCC Foundation work for GI mast of size 450mmX450mmx1000 mm,3 no.RCC Foundation work for Rope wire of size 150 mmx150mmx150 mm,Base plateof size300x300x6mm etc complete all as specified and directed.. |
| 24 | Note : Tenderers may note that amount of credit Rs 63000.00 will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender